Search Results for 16v

The M9547 Series is a 16-channel power distribution unit, designed for airborne and ground applications. It distributes 28VDC through overload and short-circuit protected switches. The M9547 Series supports Ethernet communication to control, configure and get the status of the device. • 1 input; 16 outputs Power Distribution Unit.

Our ultrasonic liquid level sensors use ultrasonic technology to generate a high -frequency sound wave to measure the time for the echo to reflect off of the target and return to the ultrasonic liquid level sensor.

M9547 series is a 16-channel power distribution unit, designed for airborne and ground applications. It distributes 28VDC through overload and short-circuit protected switches. The M9547 series supports Ethernet communication to control, configure and get the status of the device. 1 input; 16 outputs Power Distribution Unit.

Connector System (CEM5) is designed for power applications with current rating up to 9.5A/pin (12 pins energized) and the 4 signal pins supporting signal transmission. Low level contact resistance: 5mΩ max.;Side band: 10mΩ max. Amphenol introduces the Gen 5, Minitek ® 12VHPWR connector system.

In case the input voltage falls below 16 V, the input is disconnected from the output via an internal MOSFET switch, and the caps are connected to the output pins through another internal MOSFET switch.

00111983002 Splice 1119 With inserted diode 1N5353B 16V . 00111983202 Splice 1119 With inserted diode STPS5L60 . 00111984102 Splice 1119 With inserted diode 1N750A Zener 4,7V . 00111962402 Splice 1119 With inserted fuse PICOFUSE rapide ...

Telaire DSF Series PM2.5 Particulate Dust Sensor for In-Cabin Automotive Applications. Learn more about features, specifications and documentation.

IAW MIL-STD-704F and DO-160G, section 16.0 cat Z. Input clamp at 80V for device and loads. Device and loads protected on occasion of reverse voltage application. 80mA maximum at 28V input. 175mV maximum at rated current. Configurable from 2A up to outputs rated current with 5% accuracy using OVERLOAD register. Trip by I2t curve see overload curve.

Peak value of 5 x IIN for initial inrush currents lasting more than 50 μSec. 16.5± 0.5VDC. Automatic restart when input voltage returns to nominal range. Zener selected at 25% ± 5% above nominal voltage, is placed across the output for passive voltage limit. 20% ± 5% above nominal voltage.

9 16V VDC Current Consumption (Typical) Maximum Peak Current: < 100 mA Average in Active Mode: < 10 mA Average in Low Power Mode: < 100 uA Average in Sleep Mode: < 25 uA Specifications. Cable and Connector Connector Bare wire Connection LIN Interface The sensor implements a LIN interface defined by a

Operates with 5 to 16V input . Description. The Endevco ® Model 7310A is an angular rate sensor that utilizes unique silicon MEMS gyroscope technologies with custom electronics and packaging and provides reliable . sensing performance even under excessive shock and vibration environments. This angular

The M7318 military power supply is a rugged DC to DC converter which accepts an 18 - 48VDC input volt-age range and provides a single DC output from 3.3 to 50V at up to 200W. Custom outputs available upon request and the unit is Designed to meet military standards, MIL-STD-704, MIL-STD-1275, MIL-STD-810, MIL-STD-461. No overshoot.

above 60V or Under 16V for more than 2Sec and immediate shut down under 12V or above 100V Input. Power supply automatically recover when Input goes back to normal steady state line.

Operates with 5 to 16V input . Description. The Endevco ® Model 7310A is an angular rate sensor that utilizes unique silicon MEMS gyroscope technologies with custom electronics and packaging and provides reliable sensing performance even under excessive shock and vibration environments. This angular requiring accurate measurement of angular ...

The M4054 is a rugged, highly eficient, SOSATM aligned, military grade 3U VPX, 1” pitch, 28V DC to DC PSU card that provides 12V and 3.3VAUX per VITA 62 and is capable of delivering up to 768W of output power.

External capacitor connection option for additional Hold Up time. together with Amphenol Source standard CS116, RE101, RE102, RS101, RS103 converter modules. Consult factory for Isolation: applications. Input to Case: 200 VDC. Consult factory if higher levels required. Minimum 150,000 hours.

Auf dem GPS-Combi Fuß montierter externer Antennenstrahler. Biegsamer Antennenstrahler aus Flexdraht mit schwarzer Silikonummantelung. Leicht abnehmbarer Besen zur Reinigung in der Autowaschmaschine. GPS-Antenne für Festinstallationen. Vollständige hemisphärische Abdeckung. Eingebauter, rauscharmer Hochleistungsverstärker.

PCB Piezotronics | Measure vibration, pressure, force, and more