All Products
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks.
Pwr Profile+®
LOW PROFILE, HIGH CURRENT DENSITY CABLE ASSEMBLY
Pwr Profile+® I/O addresses applications requiring additional power density in space-constrained, chassis-based equipment platforms. The innovative power contact design has a lower profile for cable-to-board applications.
Pwr Profile®
LOW PROFILE, HIGH CURRENT DENSITY CABLE ASSEMBLY
Pwr Profile® I/O addresses applications requiring additional power density in space-constrained, chassis-based equipment platforms. The innovative power contact design has a lower profile for cable-to-board applications.
Pwr TwinBlade® Cable Assemblies
The Pwr TwinBlade® cable system is designed to support applications that demand the supply of high power. The Pwr TwinBlade® connectors employ a proven contact system in a touch-proof design that is capable of supporting currents of up to 100A per contact. The new sensing contacts can be used to eliminate the potential for damage from hot-plug conditions.
Pyle 26500
Medium-sized connectors with a rugged design, lightweight construction, and continuously dependable performance serving such diverse fields as avionics, missile systems, aircraft general-purpose applications, aircraft engines, and firewalls. Aluminum, stainless steel, firewall versions. Wire splice connectors are also in this family.
Pyle 26500 Hermetic Connectors
Amphenol/Pyle Commercial 26500 Connectors are qualified to Military Specification MIL-DTL-26500, as well as numerous high-performance customer specifications. Available in Stainless Steel receptacle, with bayonet or threaded coupling. Amphenol/Pyle is an experienced supplier of highly reliable hermetic connectors for the aircraft industry and our ZZL and ZZB series of hermetics.
QMA Connector Series
The QMA connector is a quick disconnect version of the SMA connector and shares the same internal construction, which allows the connector to have excellent performance up to 6 GHz.
QN Connectors
Amphenol RF’s QN connector is a quick disconnect version of the N-Type connector with similar internal construction, which enables fast and easy matings with minimum space requirements.
QSFP28 100G Transceivers
Amphenol 100G QSFP28 transceivers include SR4, CWDM4, LR4, and ER4 lite, adopt MPO or LC interface, and are compatible with IEEE802.3bm, SFF-8636, and other standards. They have the characteristics of low power consumption, small size, and high speed, and are beneficial to increasing the capacity of the data center, improving the port density, and reducing the power consumption.
QSFP28/56 Loopback Modules
Amphenol's QSFP28/56 Loopback Modules are part of our comprehensive QSFP28/56 product family which includes copper cables, active optical cables, and connectors. These QSFP28/56 loopbacks are offered as passive electrical with multiple attenuations and thermal consumption levels. QSFP28/56 loopbacks are designed to support data speeds up to 100G/200G (4 lanes at 25G/50G).
QSFP28 Active Optical Cable
COST-EFFICIENT, HIGH PERFORMANCE, PLUG AND PLAY INTERCONNECT SOLUTIONS
Amphenol's 100G QSFP28 to QSFP28 Active Optical Cable assemblies are a reliable, cost and power-efficient, integrated solution which is ideal for high-density signal transmission typically seen in most storage, data centers, and high-performance computing applications with fiber cable length up to 100meters.
QSFP28 Cable Assemblies
THE INDUSTRY LEADER IN 100G / 200G / 400G QSFP28 CABLE ASSEMBLIES
Amphenol's QSFP28G cable assembly is designed to meet data center, networking, and high performance computing application needs for high-density cabling interconnect systems capable of 28Gb/s to 112Gb/s per channel transmission rates.
QSFP Copper Cable Assemblies 100G/200G
Amphenol's QSFP28G cable assembly is designed to meet data center, networking, and high-performance computing application needs for high-density cabling interconnect capable of 28Gb/s per channel transmission rates. The QSFP28G supports the bandwidth transmission requirements for 100G Ethernet, Infiniband IBTA FDR and EDR, Fibre Channel FC-PI-5 and FC-PI-6 standards, and SAS-3 specifications.
QSFP DD
Amphenol's QSFP DD interconnect system is comprised of a 76 position, 0.8mm pitch connector built for use in high-speed serial applications. Each port supports up to 400Gb/s in aggregate over an 8 x 50Gb/s electrical interface. It is one of the industry's leading multi-lane pluggable form factors used across Ethernet, Fibre Channel, and InfiniBand.
QSFP DD 200G Active Optical Cable
Amphenol QSFP DD to QSFP DD 200G Active Optical Cable assemblies increase the number of lanes from 4 to 8 and double the port density as compared to 100G QSFP28 AOC. The QSFP DD AOCs operate up to 25Gb/s NRZ modulation and provide solutions up to 200Gb/s aggregate bandwidth, supporting 100meters over parallel multimode fiber.
QSFP DD Copper Cable Assemblies 200G/400G
200G / 400G SOLUTIONS
Amphenol's QSFP DD (Double-Density) passive copper cable assemblies double the number of high 25G/lane NRZ and 50G/lane PAM4 when compared to the existing 100G QSFP cabling systems from 4 to 8 lanes. The QSFP DD cables enable 200G or 400G in application lengths from 0.5 meters up to and including 2.5 meters.
QSFP DD Loopback 200G/400G
QSFP DD loopback cable assemblies are offered in four configurations - Passive Electrical, Passive Thermal, Active Electrical, Active Thermal. All loopback cable assemblies are backward plug compatible with existing 100 G-based systems and support 200G or 400G signaling transmission.
QSFP+ 40G Transceivers
Amphenol provides a full range of 40G QSFP+ optical transceiver from 150m to 30km reach, adopt LC or MPO interface, and is compatible with IEEE802.3bm, SFF-8436, and other standards. It has the characteristics of low power consumption, small size, and high speed which is beneficial to increase the capacity of data centers, improve the port density and reduce power consumption.
QSFP+ Active Optical Cables
Amphenol's QSFP+ to QSFP+ active optical cable assemblies provide 4 fully duplex channels per cable supporting signal transmission rates up to 10 Gb/s & 14 Gb/s per channel. The QSFP+ cable interface is based on the SFF-8436 industry standard, while also meeting the requirements of the 40GBASE-SR4 Ethernet and Infiniband SDR, DDR, QDR & FDR standards.
QSFP+ Cable Assemblies
QSFP connector, cage, and cable assemblies are designed to meet emerging data center and high-performance computing applications of delivering aggregate data bandwidths of 40Gb/s & 56 Gb/s & 112 Gb/s. This interconnect is fully compliant with existing industry standard specifications such as the QSFP MSA and IBTA.
QSFP+ Cables/Connectors
QSFP connector, cage, and cable assemblies are designed to meet emerging data center and high-performance computing applications of delivering aggregate data bandwidths of 40Gb/s & 56 Gb/s & 112 Gb/s. This interconnect is fully compliant with existing industry standard specifications such as the QSFP MSA and IBTA.
QSFP+ Copper Cable Assemblies 40G
QSFP (Quad Small Form Factor Pluggable) cable assemblies are designed to meet emerging data center and high performance computing application needs for high-density cabling interconnect systems capable of delivering aggregate data bandwidths of 40Gb/s. The QSFP cables support bandwidth transmission requirements as defined by IEEE802.3ba (40Gb/s) and Infiniband QDR (4x10Gb/s per channel).
QSFP+ Loopback Modules
Amphenol's QSFP+ Loopback Modules are part of our comprehensive QSFP+ product family which includes copper cables and connectors. These QSFP+ loopbacks are offered as passive electrical with multiple attenuations and thermal consumption levels. QSFP+ loopbacks are designed to support data speeds up to 40G (4 lanes at 10G).
QSFP+ to 4x SFP+ Copper Splitter Cable Assemblies 40G
40G QSFP+ to 4x SFP+ splitter cable assemblies are designed to meet emerging data center and high performance computing application needs for a high-density cabling interconnect system capable of delivering aggregate data bandwidths of 40Gb/s at QSFP end and 10G at SFP end. This interconnect system is fully compliant with existing industry standard specifications such as the QSFP MSA and SFP MSA.
QSFP to 2x QSFP Copper Splitter Cable Assemblies 100G/200G
The QSFP28 to 2xQSFP50 Y cable assembly supports the bandwidth transmission requirements as defined by 100 Gigabit-Ethernet (IEEE 802.3bj) and 25 Gigabit-Ethernet (IEEE 802.3by). Amphenol's QSFP28 100Gb interconnect system complies with industrial standards SFF-8665 / SFF-8402, GR-253-CORE, Gigabit-Ethernet (IEEE 802.3bj and IEEE 802.3by), FC-PI-5, and FC-PI-6.
QSFP to 4x SFP Copper Splitter Cable Assemblies 100G/200G
Amphenol's QSFP28 - 4XSFP28 Splitter cable assembly is designed to meet data center, networking and high performance computing application needs, for high-density cabling interconnect system, capable of 28Gb/s per channel transmission rates. It is designed to meet the requirements of Small Form Factor industry-standard SFF-8665 /SFF-8402.
Quadrax Contacts
High-Speed Quadrax contacts consist of an outer contact with four inner contacts spaced to form two 100 or 150 Ohm controlled impedance differential pairs. Both contacts, when used in D38999 Series III and ARINC connectors, provide an excellent alternative for harsh environment applications such as Ethernet 100 Base-T-100 Ohm, Gigabit Ethernet 1000 Base-T-100 Ohm, Fibre Channel-150 Ohm.
Quadrax Contacts
High-Speed Quadrax Contacts consist of an outer contact with four inner contacts spaced to form two 100 or 150 Ohm controlled impedance differential pairs. Both contacts, when used in Amphenol MIL-DTL-38999 Series III and ARINC type connectors, provide an excellent option for harsh environment applications.
QuickbuildRF Configurator
Amphenol Custom Cable and Amphenol RF have partnered to bring to market the QuickbuildRF Configurator. Set up your account today to custom configure your Quick Turn RF Assemblies. Receive immediate, real-time price, quick delivery due to large stock levels.
QuickbuildRF Configurator
Amphenol Custom Cable and Amphenol RF have partnered to bring to market the QuickbuildRF Configurator. Set up your account today to custom configure your Quick Turn RF Assemblies. Receive immediate, real-time price, quick delivery due to large stock levels.
Quickie® IDC Cable-to-Board Connector System
FCI Basics Quickie® is a complete solution for flat cable-to-board connections using 2.54mm pitch IDC technology. The highly durable and cost-saving connectors come with specialized features in polarization, plating, and structure. Headers are low profile and come in shrouded versions with or without eject latches. Receptacles have strain relief covers for precise alignment.
Quick Mount Relay Sockets
Quick Mount Relay Sockets snap mount into standard aircraft panel cutouts and eliminate all socket-to-bulkhead mounting hardware. Simplifying installation, reducing weight, and installation cost. Sockets meet the applicable performance and dimensional requirements of M12883 and are compatible with Mil-Spec approved relays from any manufacture.
QWL Connectors
QWL Series Connectors are tailor-made for compact, heavy-duty industrial use. The outstanding performance of this series makes it well suited for shipboard installations and ground support power distribution applications where physical strength and dependability are key requirements. The QWL Series is a versatile, economical alternative to military qualified designs.
QWLD Connectors
QWLD Series heavy-duty cylindrical connectors provide reliable power and control functions in hostile environments where ordinary connectors cannot survive. Water and explosion-proof, resistant to abrasion, corrosion, vibration, and shock. Double stub threads for fast coupling. Over 300 industrial and MS-approved insert patterns are available, including coaxial and thermocouple contacts.
R27
The Amphenol R27 Series is a robust rectangular connector designed to meet or surpass all the requirements of MIL-DTL-83527 and EN 3682. This series is particularly well suited for military and commercial aircraft applications in harsh environments. Connectors, shells, inserts, termination modules, and contacts are sold separately or as full assemblies. Can be filtered. See our 485 series.
R2CT
The R2CT field-installable IP67 weatherproof housing is designed as a cost-effective means of providing a removable interface for harsh environments. It allows for quick and easy installation onto cable assemblies. The R2CT allows direct mating to edge-mounted active devices or as a sealed feed-thru to adapters or internally mounted devices. Well suited for wireless base station applications.
R38 Series
These connectors are combinations of D-subminiature or Micro-D with RF contacts. Available in standard contacts, integrated, and reverse-gender integrated for lower-cost solutions. Have provided coax, triax, quadrax solutions for space, military, and commercial applications.
R39 - Rectangular 38999
Amphenol's rectangular 38999 connector soars to meet higher expectations. It is dynamically engineered for a changing world.
• Rectangular for space savings
• Low profile
• High density 127 position inserts or mixed inserts with power, RF, or fibre-optic available
• Blind mate
• Rugged
• Uses same contacts as standard 38999
R49 & R24 Rubber Series
The R49/R24 series are single-pole high load connectors manufactured in market-leading synthetic self-lubricating thermoset rubber. The design enables the quick, safe and secure connection of AC and DC power in the most demanding of environments. Housings and couplers and manufactured in high-grade aluminum and feature snap action ‘vibration safe’ locking mechanisms.
R58
The Amphenol R58 series are high-performance environment-resistant, rectangular connectors designed to be compatible with all MIL-DTL-83733 connectors and Amphenol Canada is interchangeable with all M83733 connectors and the only qualified supplier for the Mil-Spec JN1122. Can be filtered. See our 458 series.
Raceways
Raceways are built in a one-piece, lightweight design with multiple fixing points. Our raceways are strong, durable and make wire bundle installation and maintenance easy.
Rack and Panel Connector
Brush Rack and Panel connector series utilizes Amphenol’s durable and reliable B3 contact system in a rugged, non-floating Rack and Panel connector. Included in this series are digital and power/digital “hybrid” insert arrangements. The hybrid series utilizes Amphenol’s high-performance RADSOK® power contacts along with Amphenol’s proven B3 contact.
RADSOK®
RADSOK® technology is based upon a stamped and formed flat grid, uniquely twisted into a hyperbolic geometry to provide robust, high-density contact to the mating pin contact. This provides the high normal forces required for conductivity and provides a large conductive surface area. Correspondingly low voltage drop and low-temperature rise are also achieved while maintaining low insertion forces
RADSOK R8S
HV/HP contact with a new design. Asymmetric socket contact for Automotive and Industrial applications. Several connection possibilities and sizes are available. Produced by a precision and price optimized stamping and bending process.
RADSOK® | High Power Connectors
Electric and electronic applications require increasingly more energy. Traditional connection technologies are often not able to fulfill these requirements. Amphenol offers RADSOK - a new generation of high-power contacts. The hyperbolic contact geometry offers many advantages such as contact coverage of up to 65%, absorption of vibrations as well as superior durability of the contact element.
RADSOK® PGY™
This series, utilizing RADSOK® socket contact technology for right angle power-to-board application, compact footprint, metal square, press-fit high power connector. With five sizes ranging from 2.4mm, 3.0mm, 3.6mm, 4.8mm, and 5.7mm contact sizes and up to 120 amps possible with a standard operating temperature from -40°C to +125°C.
RADSOK® PowerBlok™
This series, utilizing RADSOK® socket contact technology for power-to-board backplane application, compact footprint, thermoplastic square, press-fit high power connector. With three sizes ranging from 2.4mm, 3.0mm, and 3.6mm contact sizes and up to 70 amps possible with a standard operating temperature from -40°C to +125°C.
RADSOK® PowerBlok™ WTB
This series, utilizing RADSOK® socket contact technology for power-to-board two-point contact terminals application, low profile compact footprint, metal square, press-fit high power connector. With two sizes, 2.4mm and 3.6mm contacts and up to 70 amps possible with a standard operating temperature from -40°C to +105°C.
RADSOK® SMT RADSERT™
This series, utilizing RADSOK® socket contact technology for board-to-board mezzanine application, compact footprint, metal circular, press-fit high power connector. With five sizes ranging from 2.4mm, 3.0mm, 3.6mm, 4.8mm, and 6.0mm contact sizes and up to 120 amps possible with a standard operating temperature from -40°C to +125°C.
Rain Light Sensor
The rain and light sensor provides configurable wiper control inputs for Heavy Truck applications in addition to supporting auto-headlight control.
Ranger Connectors
Lightweight pin and socket connection. Designed for future solder requirements. Capable of USB 3.0, push-pull or breakaway mating, and IP-68 rated.