All Products
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks.
Waterproof USB Type C
SCALABLE, SUPERSPEED CONNECTOR SYSTEM
Waterproof USB Type C with IPX8 performance supports a variety of protocols such as USB 2.0, USB 3.2 Gen 1, USB 3.2 Gen 2 and meets high-speed communication and power delivery (20V, 5A). The usability of Waterproof Type C is with strong IP performance and unique IP technology to ensure each part meets the high quality of waterproof performance.
WaveTrax Fiber Raceway
WaveTrax®, the Amphenol Network Solutions fiber raceway system, is designed to help engineers deliver reliable fiber optic network performance. Reduce your cost of ownership with the full line of WaveTrax products, including troughs, elbows, cross and T sections, off-ramps, and articulating links - easily installed so you are up and running quickly!
Wearable Device Antenna
Amphenol's Laser Direct Structuring (LDS) is used for wearables, smart phones, tablets and other mobile devices. The antenna can be mounted on a plastic holder with an irregular shape. It can save space and improve the performance of the antenna.
Wearable Device Hinge M1192
Wearable hinge made of MIM and PEEK. Open angle to 67 degree with maximun torque at around 300N.mm. Life reaches to 30K cycles.
Wearable Hinge M1577
Wearable hinge made of MIM and PEEK. Open angle to 70 degree with maximun torque at around 670N.mm. Life reaches to 20K cycles.
Wifi Power Cable CWR051
Wifi power cable for Laptop studio and made of 36AWG discrete wire and 0.4Pitch 50 Pin connector. Life reaches to 50K cycles in multiple motion modes(bending/rolling/tensile)
Wifi Signal Cable CWR048
Wifi signal cable for Laptop studio and made of 40AWG coaxial wire and 0.4Pitch 50 Pin connector. Life reaches to 50K cycles in multiple motion modes(bending/rolling/tensile)
Window-Type Amplifiers
AM/FM feature with a single antenna that performs well, unrestricted by design, and occupies minimal space. It can be expanded to include DAB functionality as per requirements.
Wire and Cable Harnesses
Electrical installation for buses, special vehicles, machines (construction and agricultural), marine, and rolling stock (low and high voltage).
Traditional and CAN-based installation (power, signal, communication wires, and cables), with various means of protection.
Wired Control Panels
Wired Control Panels are used in the cockpit or in the avionic bay. Features are done through wired electromechanical components such as toggle, rotary, breakers, indicators. They may incorporate a Front Face Panel with lighted legends, touches. We hold Part21G and PART145 certificates for production & maintenance. We support product design and certification by delivering full documentation.
Wire Harness Assemblies
Small to large and low to complex wire harness assemblies with up to 1000 circuits, for on-road and off-road specialty vehicles and military ground vehicles. Production volumes range from low to high volume and include ultra-low prototypes and quick turn requirements. Applications include over-molding. Production resources are in the U.S. and Mexico. We have ITAR certification and DoD MLAs.
Wireless Charger
Tecvox supplies Qi-certified Wireless charging solutions to global vehicular OEMs with both passive and actively cooled solutions providing optimum performance and charging experience. Our products are homologated in over 120 countries and can provide RFID protection, foreign obstacle detection, NFC, CAN and LIN communication, antenna coupling, and phone as key features.
WireLock®
WireLock® is a 1.80mm pitch wire-to-board connector system. Its compact design addresses the growing need for space-saving automotive-grade connectors. WireLock® is a double row connector system offering four coding types with different colors.
Wire Protector System
This series is economical PCB terminal blocks, which mainly take 2P/3P as the base pole and can be combined into any desired pole according to customers' requirements. With anti-vibration characteristics, flexible and convenient connection mode. Space 2.50mm-10.16mm, product design in line with IEC/EN60998, IEC/EN60947-7-4, UL1059, CSA C2.22 No.158, and other international standards.
Wire-to-Board Connector System (1.20mm pitch)
FCI Basics 1.20mm wire-to-board connector system is low profile and compact with 3, 4, and 6 pin counts. The plug and receptacle use a frictional mating method enabling up to 20 mating cycles.
The enclosed receptacle makes sure that the side entry matings are secure in tight spaces. Additional polarized key slots prevent any misalignment between the plug and receptacle.
Wire-to-Board Connector System (1.25mm pitch)
FCI Basics 1.25mm wire-to-board connector system is designed for a wide variety of applications in Industrial, Automotive, and Consumer markets. The comprehensive range consists of terminals, crimp housings, and PCB headers in straight and RA, SMT, and through-hole configurations. It is available in 2 to 15 circuits in a single row. 1.25mm WTB solution conforms to the EU Industry Safety Standard.
Wiring Accessories and Standoffs
Designed to secure and guidewire bundles throughout an aircraft, Amphenol Air LB France's wiring accessories are designed with strength, stability, and weight reduction in mind. They come in a large variety of sizes, shapes, and materials. They are able to support large bundles and high-stress requirements.
WQ-15
Applied to Smart Home - Thermostat.
Compatible with PCB sockets, providing a variety of wiring methods.
Socket with tenon fixed can be provided for matching.
X2
DESIGNED TO ACHIEVE 56G DATA RATE REQUIREMENTS
X2's upgraded platform maintains backward mating interface compatibility with existing XCede® products while offering new backplane configurations. Mid-plane-based orthogonal solutions are available for 6-Pair along with the others, supporting both 85Ω and 100Ω to meet a wide variety of application needs, including Ethernet and PCI.
XCede I/O
The XCede® I/O interconnect system is comprised of a 32-position, variable pitch connector built for use in high-speed serial applications. Each port offers 4 channels to increase port density which contributes to more board real estate and immense cost savings. The XCede® I/O connector supports next-generation 100G+ applications and transmits up to 25 Gbps/serial-lane.
XCede Plus Backplane Connector
DESIGNED TO ACHIEVE 32G DATA RATE REQUIREMENTS
XCede Plus leverages the same core technologies as XCede with improved signal integrity performance while maintaining backward mating interface compatibility with existing XCede products.
XCede® Backplane Connector
ENABLING FUTURE DATA RATES
While maintaining the same mating interfaces, this connector design provides designers with readily available 85Ω and 100Ω solutions to meet a wide variety of application needs, including Ethernet and PCI.
XCede® Family Cable Assemblies
Cable Backplane Systems is part of Amphenol's Highspeed Backplane Product business, dedicated to developing and manufacturing cabled backplane solutions for next-generation system architectures. Our customers are leading providers of data center switches and routers, enterprise servers, and high-performance computers.
XCede® HD
XCede® HD backplane connector achieves high performance (up to 20 Gb/s) in a Hard Metric form factor. Offering a linear density of up to 84 differential pairs per inch (33 differential pairs per centimeter), the XCede® HD connector meets the requirements of high-density architectures with a 35% increase in density as compared to standard XCede®.
XCede® HD2
DESIGNED TO ACHIEVE 56G DATA RATE REQUIREMENTS WITH HIGHER DENSITY
While maintaining the same mating interfaces with XCede® HD and XCede® HD Plus, this connector provides developers with a readily available robust solution for tighter card pitches and chassis designs where space requirements and density are critical.
XCede® HD Plus
The XCede® HD Plus backplane connector achieves high performance (up to 28+ Gb/s) in a Hard Metric form factor. Offering a linear density of up to 84 differential pairs per inch (33 differential pairs per centimeter), the XCede® HD Plus connector meets the high-density needs of today's challenging architectures.
XCede® Power Connectors
XCede® connector platform is designed to provide headroom for high-speed, serial data rates demanded by data centers and service provider networks. The use of polymers in a resonance-damping shield enables low crosstalk across a wide frequency range. The XCede® backplane header system provides the ruggedness and long-term reliability required by today's systems.
XFP
XFP is a 30pos 0.8mm pitch SMT receptacle designed to support 10 Gigabit Fibre Channel and Gigabit Ethernet with the ability to extend performance to 14 Gbps. It is constructed from a metal frame and the cage assembly is to be bezel-mounted to an I/O panel with compliant pins for pressing onto the host PCB. Its single row cage configuration requires less space & is cost-optimized.
XFP 10G Transceivers
XFP 10G optical transceivers include SR, LR, ER, ZR and support Duplex, BiDi, CWDM, and DWDM solutions. They adopt an LC interface and are compatible with IEEE802.3ae, XFP MSA, and other standards. XFP 10G optical transceivers have the characteristics of low power consumption, small size, and high speed. They are most commonly used in Transmission, Storage Area Networks, and other environments.
X-LOK Push-Lock Connectors
Amphenol LTW's X-Lok Series connectors are presented in various sizes for power, signal, and hybrid applications for fast, simple, and reliable connections. Features a push-lock mechanism for intuitive mating with AUDIBLE and TACTILE feedback.
YK50B & YK44B - Barrier Terminal Blocks
YK50B & YK44B are designed with nuts with greater screw torque and prevent torsion from reaching the terminal when screwing. The structure is simple and firm, and the connection is safe and reliable.
ZConnect Low-Profile LV214-Compliant Connectors
Amphenol LTW ZConnect® LV214-Compliant Connectors are low-profile connectors (8mm maximum mated height) for space-saving. ZConnect Connectors are robust enough to meet the automotive requirements of LV214 (VW75174). The series ranges from 8 to 40 contacts at 1A up to 120VDC with 0.9mm / 1.8mm / 2.7mm pitch. The connectors include mated and unmated versions and an IPx67 option.
Zeus Din-Rail 7KV & 5KV
Zeus series is a High voltage Din-Rail Connector that can be used as a high voltage terminal block. 5KV or 7KV Available in 2 or 3 contacts versions. Snap-in RADSOK Contact technology for 6AWG, 8AWG, and 12AWG. The connector is designed with Creepage/Clearance in accordance with5KV IEC60079-7 guidance
Zhaga Book 18 Compliant FLS Series
OUTDOOR LIGHTING RECEPTACLES, BASES, AND DOMES
The FLS Series products are compliant with Zhaga Book 18. The FLS Receptacle is designed with 4 contacts for Power, DALI, and Digital I/O, and mounts on a Luminaire. The mating FLS Base /Extension Module and Dome together form the housing for a Photocell/Sensor Module assembly.
Zhaga Book 20 Compliant FLM Series
The FLM Series products are compliant with the Zhaga Book 20. Zhaga Book 20 specifies 2 position connectors identified as Luminaire Extension Module Receptacles (LEX-MR) and Luminaire Plugs (LEX-LP), used for DALI-2 (Digital Addressable Lighting Interface) applications. DALI-2 is a smart interface protocol between indoor luminaires and sensors and communication modules.