All Products
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks.
![Product Colinear Omni Antenna for LTE & DMR - 42XX](https://staph.blob.core.windows.net/images-products/colinear-omni-antenna-for-lte-and-dmr-42xx-Thumbnail.png)
Colinear Omni Antenna for LTE & DMR - 42XX
The PRO-TRI 174/380-520/760-960 is a Triplex Filter (Multiplexer) used for combining /splitting 3 LMR/PMR radios, a VHF, a UHF, and an LTE to/from just one antenna. It comes in 2 versions both with SMA connectors, one for low/medium power up to 30 W per radio and one for high power radios up to 150 W per channel.
![Product µCom 10 Gb+](https://staph.blob.core.windows.net/images-products/com-10-gbplus-3660.png)
µCom 10 Gb+
µCom-10Gb+ Series connector is designed to meet the latest market trends of the industry: miniaturization and high speed. µCom-10Gb+ design of 4 twisted data pairs insulated throughout the entire connector results in a performance that exceeds IEEE 802.3an-2006 specifications for 10GBASE-T Ethernet and TIA/EIA-568-C.2 Cat6 standards.
![Product Combined Pressure & Temperature Sensors](https://staph.blob.core.windows.net/images-products/Combined-Pressure-And-Temperature-Sensors-5160.png)
Combined Pressure & Temperature Sensors
i2s is your contact for the development and production of pressure sensors, temperature sensors, mass air flow sensors, as well as combination sensors for several measurements. Customers from the automotive, commercial vehicle, mechanical engineering, and metrology industries have been relying on our experience and know-how for more than 15 years.
![Product Combo-D](https://staph.blob.core.windows.net/images-products/combo-d-Thumbnail.png)
Combo-D
Positronic Combo-D connectors are a combination of signal and power and are part of the D-sub family. Combo-D connectors are used in military, communications, space, industrial, and medical applications. These connectors are available in various performance levels for the best cost/performance ratio.
![Product ComboLock® Wire-to-Board Connector System](https://staph.blob.core.windows.net/images-products/combolockr-wire-to-board-connector-system-3146.png)
ComboLock® Wire-to-Board Connector System
The ComboLock® Wire-to-Board connector's compact design for the limited space application needs carries power and signal requirements. The connector system has hybrid 1.00mm pitch signal and 3.00mm pitch power configuration with an active latching feature. The connector has a nominal current carrying capacity of 10A/pin max for power and 1.5A/pin max for signal. Power wire sizes from 26 to 18AWG
![Product ComboStak® and PowerStak® Board-to-Board Connectors](https://staph.blob.core.windows.net/images-products/combostakr-and-powerstakr-board-to-board-connectors-4803.png)
ComboStak® and PowerStak® Board-to-Board Connectors
ComboStak® and PowerStak® are compact, hybrid (signal and power), and power board-to-board connectors. ComboStak® combines existing, BergStak® 0.8mm pitch signal pins with 2.00mm pitch power blades. PowerStak® is the power-only version. Both ComboStak® and PowerStak® provide high signal and current density with a wide range of stack heights.
![Product Compact PCI Serial 3U 6-Slot Backplane](https://staph.blob.core.windows.net/images-products/compact-pci-serial-3u-6-slot-backplane-Thumbnail.png)
Compact PCI Serial 3U 6-Slot Backplane
Amphenol-BSI’s range of PICMG compliant backplanes includes CompactPCI Serial which modernizes CompactPCI to include high-speed serial Ethernet, PCIe, SATA and USBinterconnects. These high-speed serial interconnects are capable of data rates up to 12Gb/s.
![Product Compact Universal Enclosures](https://staph.blob.core.windows.net/images-products/compact-universal-enclosures-9916.png)
Compact Universal Enclosures
Compact Universal Enclosures were designed around the principle of “flexibility.” These versatile enclosures may be wall, pole, strand or pedestal-mounted and configured to meet a variety of fiber, copper, or coaxial distribution applications. With a universal backplane and interchangeable feed and drop cable port plates, they are especially efficient at meeting FTTX deployment challenges.
![Product Complex Harnesses](https://staph.blob.core.windows.net/images-products/complex-harnesses-Thumbnail.png)
Complex Harnesses
Amphenol CTI manufactures wire harnesses and cable assembly solutions of any complexity for a broad range of industries and applications. Certifications: UL, CSA, ISO9001, CE, IPC620, WHMA, C-TPAT, IATF16949. Capabilities: Complex circuits counts / 70+ ft long / Harsh environment / Complex branching & bundling / Splices / Braiding. Tooled for many major interconnect suppliers
![Product Composite Mounting Platforms (CPAD)](https://staph.blob.core.windows.net/images-products/composite-mounting-platforms-cpad-8275.png)
Composite Mounting Platforms (CPAD)
Composite Pads (CPAD) are economical alternatives for poured in place and pre-cast concrete pads used to mount cabinets, generators, electric vehicle chargers, and other outdoor enclosures. They provide a flat, stable mounting surface and below-grade slack storage. One-piece and modular bay designs are available. Advanced composite material construction is both lightweight and rugged.
![Product Composite Self-Closing Caps](https://staph.blob.core.windows.net/images-products/composite-self-closing-caps-5760.png)
Composite Self-Closing Caps
For PT/451 Series, RJ/USB Field & Amphenol Sine RT360.
![Product Compression Connectors](https://staph.blob.core.windows.net/images-products/Compression-Connectors-7218.png)
Compression Connectors
COMPRESSION-TYPE SURFACE MOUNT CONNECTORS FOR HDD (HARD DISK DRIVE)
Compression connectors are customizable single-piece solutions that facilitate read & write functions in traditional low-cost bulk-storage HDDs and helium HDDs.
![Product μCom USB3.0](https://staph.blob.core.windows.net/images-products/com-usb3-0-3219.png)
μCom USB3.0
Miniature multi-pin USB3.0 connectors for harsh environments.
![Product Conan® 1.00mm Connector](https://staph.blob.core.windows.net/images-products/ConanR-1-00mm-Connector-5757.png)
Conan® 1.00mm Connector
Amphenol ICC's Conan® 1.00mm is a mezzanine connector designed for industrial applications and harsh environments. Conan® 1.00mm provides a mechanically secure, high-density electrical interface between parallel printed circuit boards. Its unique design with an audible 'click' sound enhances the security and ease of use. It has good mating performance, rugged design, and is under 70 positions.
![Product Conan® Lite 1.00mm Connector](https://staph.blob.core.windows.net/images-products/conanr-lite-1-00mm-connector-9024.png)
Conan® Lite 1.00mm Connector
Conan® Lite 1.00mm connectors come with a robust metal down feature that helps in establishing a reliable connection with the PCB in both parallel and perpendicular board-to-board applications. These connectors also feature an audible "click" sound ensuring mating in place. Conan® Lite vertical headers, receptacles, and right-angle headers are offered in 9-69 positions.
![Product Concentric Twinax Contacts](https://staph.blob.core.windows.net/images-products/Concentric-Twinax-Contacts-9409.png)
Concentric Twinax Contacts
The size 8, 10, and 12 concentric twinax contacts were developed for applications that require high-performance interconnect characteristics in multi-pin connectors. Ideal for this application need is the high-performance D38999 Series III connector with its fully scoop-proof feature of recessed pins. The concentric Twinax contact is crimp terminable to twisted shielded cable.
![Product Conduits](https://staph.blob.core.windows.net/images-products/Conduits-6530.png)
Conduits
High-performance Conduits are intended to be supported by Amphenol Pcd P-Clamps. Conduits provide support for wire bundles where separation or protection from other systems or structures is necessary. Conduits can be installed anywhere in the aircraft, including the wings. Although Amphenol Pcd Conduits are available in various standard configurations and sizes, we offer custom products as well.
![Product CONEC AT/DT and VSS Superseal Series](https://staph.blob.core.windows.net/images-products/conec-at-dt-and-vss-superseal-series-Thumbnail.png)
CONEC AT/DT and VSS Superseal Series
Whether tractors, excavators, or construction machines, the segment IVCM (Industrial Vehicles and Construction Machines) places high demands on the connectors used. The CONEC series of overmolded AT, DT, superseal connectors are assembled in-house and overmolded and thus provide optimal protection against external influences in harsh environments. Degree of protection: IP67/IP69K.
![Product CONEC ATM connectors](https://staph.blob.core.windows.net/images-products/conec-atm-connectors-6105.png)
CONEC ATM connectors
The ATM connector series is designed as a cable-to-cable connection. It locks securely and without tools via a latch. The series is not only used in agricultural, agricultural and vehicle technology, but also frequently in process automation and control technology. The overmoulded ATM connectors are available as plugs and sockets in the variants connecting cable with open cable end or connecting cable.
![Product CONEC CPC Connector Series](https://staph.blob.core.windows.net/images-products/conec-cpc-connector-series-Thumbnail.png)
CONEC CPC Connector Series
In addition to agricultural and automotive engineering, CPC connectors are frequently used in control cabinets, robotics, injection molding machines, and machine tools. This design is a robust connector which, in contrast to the previous agricultural connectors in the CONEC product range, has a threaded connection with positive detent and is smaller in size than, for example, an Isobus connector.
![Product CONEC D-SUB Filter connectors](https://staph.blob.core.windows.net/images-products/conec-d-sub-filter-connectors-Thumbnail.png)
CONEC D-SUB Filter connectors
With increasing data transmission rates and operating frequencies, it is becoming increasingly important to ensure the function of electrical devices and systems in each other’s environment in order to guarantee trouble-free operation. CONEC filter connectors help to dissipate conducted interference directly at the interface. Filter D-SUB connectors are available as standard, high density or dual port.
![Product CONEC D-SUB Series](https://staph.blob.core.windows.net/images-products/conec-d-sub-series-Thumbnail.png)
CONEC D-SUB Series
CONEC D-SUB connectors are available in five standardized housing sizes in the variants D-SUB Standard, D-SUB High Density, D-SUB Filter, D-SUB Combination, D-SUB Filter Combination and D-SUB hoods. Depending on the mounting type and number of poles, a choice can be made between crimp, wire-wrap, solder pin, solder cup and insulation displacement terminal connection types.
![Product CONEC Enclosure technology customized](https://staph.blob.core.windows.net/images-products/conec-enclosure-technology-customized-7668.png)
CONEC Enclosure technology customized
Distribution boxes have been a necessary hardware component in mechanical and plant engineering for decades. They serve as extended input and output interfaces of the electrical control. CONEC designs and produces customer-specific distribution box housings with directly molded M8/M12/7/8“ or hybrid interfaces; other industrial interfaces are also possible on request.
![Product CONEC Hybrid Connectors](https://staph.blob.core.windows.net/images-products/CONEC-Hybrid-Connectors-4034.png)
CONEC Hybrid Connectors
The CONEC Hybrid connector series combines power supply and data transmission in one connector. Different sizes ( B12, B17, B23, B40 ) for various power classes from drives or devices offer maximum flexibility. Whether for small DC drives or powerful servo drives, CONEC Hybrid connectors are the perfect solutions.
• According to IEC 61076-2-118 standard
• Shorter assembly times
• Bayonet locking
![Product CONEC IP67 D-SUB Series](https://staph.blob.core.windows.net/images-products/conec-ip67-d-sub-series-Thumbnail.png)
CONEC IP67 D-SUB Series
These connectors are used where dust and spray water occur and the functioning of usual connectors would be negatively affected. These connectors are available as standard, high density, filter, or combination in the usual pole number.
![Product CONEC IP67 D-SUB SlimCon](https://staph.blob.core.windows.net/images-products/conec-ip67-d-sub-slimcon-5934.png)
CONEC IP67 D-SUB SlimCon
The IP67 D-SUB CONEC SlimCon connector series offers very small dimensions in addition to its one-piece zinc die-cast housing.
The most important reasons:
• 1:1 conversion from IP20 to IP67 interfaces possible
• Saving of installation space
• Robust one-piece zinc die-cast housing
• different series available (ST, HD, Combination)
![Product CONEC IP67 Fiber Optic LC Duplex Connectors](https://staph.blob.core.windows.net/images-products/conec-ip67-fiber-optic-lc-duplex-connectors-4408.png)
CONEC IP67 Fiber Optic LC Duplex Connectors
CONEC IP67 Fiber Optic LC Duplex connectors offer secure and fastest option for data transmission. Suitable for industry with standard LC interfaces according to IEC 61754-20. Protection class IP67/IP68 Available as Single Mode (SM), Multi Mode (MM) and APC Single Mode (APC-SM).
![Product CONEC IP67 Power Bayonet Series](https://staph.blob.core.windows.net/images-products/conec-ip67-power-bayonet-series-Thumbnail.png)
CONEC IP67 Power Bayonet Series
The connector series is designed for industrial cable connections with IP67 protection and the bayonet locking allows a quick, simple, and robust connection in harsh environments. The 2-pos. version is mainly designed for DC use up to max. 48 V DC and the 3-pos. version utilizes a premating contact for AC up to max. 250 V AC with protective earth contact (PE).
![Product CONEC IP67 RJ45 series Cat5e & Cat6A](https://staph.blob.core.windows.net/images-products/conec-ip67-rj45-series-cat5e-and-cat6a-Thumbnail.png)
CONEC IP67 RJ45 series Cat5e & Cat6A
The connector series is designed for Industrial Ethernet wiring with protection degree IP67 and the bayonet locking allows fast, simple and robust connection in harsh environments. The broad portfolio includes connectors in plastic, metalized plastic or full metal.
![Product CONEC IP67 USB series](https://staph.blob.core.windows.net/images-products/conec-ip67-usb-series-7115.png)
CONEC IP67 USB series
Data communication is also required in outdoor applications. Whether in traffic engineering, in maritime environments or mobile phone applications, long transmission distances and impacts such as heat, rain, snow, salty mist and dust place high demands on all connectors. The IP67 USB connectors developed by CONEC provide reliable protection against environmental influences and mechanical stress.
![Product CONEC ISOBUS Series](https://staph.blob.core.windows.net/images-products/conec-isobus-series-Thumbnail.png)
CONEC ISOBUS Series
With increasing demands on efficiency in agriculture, precision farming is becoming more and more important. Precision farming is the targeted management of utilized agricultural land.
To ensure the necessary communication between tractors, equipment, and agricultural management software, the non-proprietary ISOBUS is used.
![Product CONEC M12x1 Series L-Coding](https://staph.blob.core.windows.net/images-products/conec-m12x1-series-l-coding-Thumbnail.png)
CONEC M12x1 Series L-Coding
The overmoulded M12 L-coded connectors require 30% less installation space compared to a 7/8″ connector. Due to the high current carrying capacity of 16 A with a strand cross-section of 2.5 mm², they are also able to ensure the power supply of devices via a miniaturised interface. Also available: sockets & field attachable connectors.
![Product CONEC M12x1 Series with Bayonet Quick Locking](https://staph.blob.core.windows.net/images-products/conec-m12x1-series-with-bayonet-quick-locking-Thumbnail.png)
CONEC M12x1 Series with Bayonet Quick Locking
The CONEC connector series with bayonet quick locking system allows safe and quick locking even in areas that are difficult to reach and/or not visible. With the “three-point” bayonet locking it is possible to lock the connection by hand with a 90 ° turn. You get direct tactile and acoustic feedback as soon as the connector is locked.
![Product CONEC M12x1 Series X-Coding](https://staph.blob.core.windows.net/images-products/conec-m12x1-series-x-coding-Thumbnail.png)
CONEC M12x1 Series X-Coding
In view of the increasing amount of data in industrial plants, designers and planners are faced with the question of how to transfer data quickly and reliably. Typical areas of application that require continuously higher data transmission rates are, for example, vision and scanner systems for production monitoring and real-time data evaluation.
![Product CONEC Series M8x1 D-Coded "Fast Ethernet"](https://staph.blob.core.windows.net/images-products/conec-series-m8x1-d-coded-fast-ethernet-Thumbnail.png)
CONEC Series M8x1 D-Coded "Fast Ethernet"
With M8x1 D coding, Industrial Ethernet transmission is implemented using a 4-pole M8x1 connector in conjunction with a 360° shielding and a standard Ethernet cable. Together with the contacts changed to 0.8 mm diameter, the connector enables a transmission rate of up to 100 Mbit/s (Fast Ethernet).
![Product CONEC Series M8x1 P-Coded "EtherCAT P"](https://staph.blob.core.windows.net/images-products/conec-series-m8x1-p-coded-ethercat-p-Thumbnail.png)
CONEC Series M8x1 P-Coded "EtherCAT P"
The special feature of EtherCAT-P is the combination of superfast EtherCAT communication with the 24 V power supply. Data and power (Us) for system and sensor supply with 24 V and 3 A are provided on a two-wire data pair. The second data pair provides data and the peripheral voltage (Up) for the supply of the actuators.
![Product CONEC SnapLock D-Sub Hoods & Connectors](https://staph.blob.core.windows.net/images-products/conec-snaplock-d-sub-hoods-and-connectors-Thumbnail.png)
CONEC SnapLock D-Sub Hoods & Connectors
You are searching for a D-SUB hood system that enables quick and easy locking and unlocking without additional tools? That allows a locking even at poorly visible device interfaces due to the audible and tangible ” click”? Do you want to upgrade an existing system with quick-release Hoods? The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick locking.
![Product Conformable RF Cable Assemblies](https://staph.blob.core.windows.net/images-products/conformable-rf-cable-assemblies-5587.png)
Conformable RF Cable Assemblies
SV Microwave's conformable RF cable assemblies can be easily formed by hand. The braided outer shield of the standard flexible cable is replaced with a tin-plated outer braid that is durable but flexible. Conformable or hand-formable cable assemblies are ideal when the cable bends must be determined during the installation of the assembly.
![Product Connectivity Products - North America](https://staph.blob.core.windows.net/images-products/connectivity-products-north-america-Thumbnail.png)
Connectivity Products - North America
We offer highly automated Cable Assemblies for Low & High Speed Automotive Ethernet. High reliable and tested Cable Assemblies for standard interfaces (acc. ISO 8092-6) supporting Low Speed Ethernet 100 Mbps and 1 GBps UTP (IEEE 802.3bw), 1 GBps STP (IEEE 802.3bp / Open Alliance TC9) and High Speed Ethernet - 10+GBps STP / SPP (IEEE 802.3ch).
![Product Connectors for Electric Vehicles](https://staph.blob.core.windows.net/images-products/connectors-for-electric-vehicles-Thumbnail.png)
Connectors for Electric Vehicles
Discover our variety of high voltage connectors for electric vehicles. Each has a safety interlock system and is waterproof. Our experience for all kinds of products in High Voltage and High Current applications, is a driver for a sustainable future with more green propulsion systems. We are regularly expanding our HV portfolio to meet market trends or to develop specific solutions for customers.
![Product Contact Pads](https://staph.blob.core.windows.net/images-products/Contact-Pads-4374.png)
Contact Pads
Amphenol's contact pads are used in contact areas and as spacers on PCBs. Durable plating includes a diffusion barrier. The contact pads connect with low resistance over the product's lifetime for use in sensitive connections of antennas, microphones, and carbon PCBs. They are available in a wide variety of shapes and sizes. Thickness: scalable ≥ 0.1 mm.
![Product Control Panels](https://staph.blob.core.windows.net/images-products/control-panels-9239.png)
Control Panels
Control panels for construction machines, yachts, and boats include pushbuttons and switches (for example from Carlingswitch), control indicators, and displays with application software. Control panels made out of ABS, PMMA, metal class A2 and A4. Possible protection rate up to IP65-67. Manufactured according to customer specification and design.
![Product Converge RF Cable Assembly Capability](https://staph.blob.core.windows.net/images-products/converge-rf-cable-assembly-capability-5460.png)
Converge RF Cable Assembly Capability
SV Microwave offers a completely customizable solution to optimize cable assembly flexibility in applications with tight routing requirements while minimizing insertion loss. Our proprietary ConvergeRF capability introduces a direct solder connection that transitions from Ø.047" cable to Ø.085" cable without additional interfaces.
![Product Coolant Temperature Sensor](https://staph.blob.core.windows.net/images-products/coolant-temperature-sensor-Thumbnail.png)
Coolant Temperature Sensor
Temperature sensors are used to measure media temperatures or body temperatures at various points in the vehicle. These sensors can be either individual sensors or integrated with other components or liquid ducts.
![Product Cool Edge 0.80mm Hybrid Power & Signal Connectors](https://staph.blob.core.windows.net/images-products/Cool-Edge-0-80mm-Hybrid-Power-And-Signal-Connectors-4861.png)
Cool Edge 0.80mm Hybrid Power & Signal Connectors
Cool Edge Hybrid Power and Signal connectors provide a one-piece high speed and high power card-edge package. These versatile solutions address multiple standards like PCIe, SAS, SATA, and offer multiple BTB configurations such as mezzanine, coplanar, and midplane/backplane. Moreover, the connectors are designed as Open Pin Field and are hot-plug capable.
![Product Cool Edge 1.00mm PCIe Connectors](https://staph.blob.core.windows.net/images-products/Cool-Edge-1-00mm-PCIe-Connectors-1174.png)
Cool Edge 1.00mm PCIe Connectors
Cool Edge PCIe® connectors bring high-speed PCIe® support into a one-piece card edge package with 16GT/s Gen 4 and 32GT/s Gen 5 capabilities. Slim connector design saves space on the motherboard while facilitating other higher-density applications. These connectors come with a simple housing design with an overall reduced footprint, providing additional benefits over standard PCIe® CEM solutions.
![Product CoolPower® SDM Connectors](https://staph.blob.core.windows.net/images-products/CoolPowerR-SDM-Connectors-5497.png)
CoolPower® SDM Connectors
CoolPower® Slim Drawer Mini (SDM) Connectors offer a high level of mating configuration flexibility, current density, and a thin profile making it ideal for compact board-to-board power interconnects. The CoolPower® SDM series is available with two or four power lines and boasts up to 318A per linear inch in a footprint of only 5.6mm x 14mm.
![Product CoolPower® SDM Connectors for EV Charging](https://staph.blob.core.windows.net/images-products/CoolPowerR-SDM-Connectors-for-EV-Charging-9090.png)
CoolPower® SDM Connectors for EV Charging
CoolPower® Slim Drawer Mini (SDM) Connectors offer a high level of mating configuration flexibility, current density, and a thin profile making it ideal for compact board-to-board power interconnects. The CoolPower® SDM series is available with two or four power lines and boasts up to 318A per linear inch in a footprint of only 5.6mm x 14mm.
![Product CoolPower® Slim Drawer](https://staph.blob.core.windows.net/images-products/CoolPowerR-Slim-Drawer-4095.png)
CoolPower® Slim Drawer
Amphenol's CoolPower® Slim Drawer Series is configurable to accommodate various combinations of power and signal contacts and a number of mounting and termination options. CoolPower® Slim Drawer can deliver up to 60A per pin and provides an ultra-low end-of-life contact resistance of just 0.4mΩ. Additional features include blind-mating, sequential mating, and true hotplug capabilities.
![Product CoolPower® Slim Drawer for EV Charging](https://staph.blob.core.windows.net/images-products/CoolPowerR-Slim-Drawer-for-EV-Charging-4935.png)
CoolPower® Slim Drawer for EV Charging
Amphenol ICC's CoolPower® Slim Drawer Series is configurable to accommodate various combinations of power and signal contacts and a number of mounting and termination options. CoolPower® Slim Drawer can deliver up to 60A per pin and provides an ultra-low end-of-life contact resistance of just 0.4mΩ. Additional features include blind-mating, sequential mating, and true hotplug capabilities.