All Products
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks.
![Product DIN 41612 Headers and Receptacles](https://staph.blob.core.windows.net/images-products/DIN-41612-Headers-and-Receptacles-6276.png)
DIN 41612 Headers and Receptacles
FCI Basics DIN 41612 connector systems are the most popular backplane interconnect systems in IEC 603-2 specifications due to the widespread standard adoption, easy availability, cost-effectiveness, and durability. The product design for Board-to-Board and I/O solutions involve both standard mount and reverse mount mating combination.
![Product DIN 41612 High-Temperature Headers and Receptacles](https://staph.blob.core.windows.net/images-products/DIN-41612-High-Temperature-Headers-and-Receptacles-5658.png)
DIN 41612 High-Temperature Headers and Receptacles
DIN 41612 High Temperature (HT) connectors meet the fire safety standards required in the Industrial (Transportation, Power) market. DIN is most suitable for hazardous and high-risk product platforms of fire safety applications required in the industrial market. The 2.54mm pitch HT connectors comply with the relevant standards like IEC 603-2, NFF 16-101/102, and EN45545-2.
![Product DIN IDC Cable Connectors and Cable Assemblies](https://staph.blob.core.windows.net/images-products/DIN-IDC-Cable-Connectors-and-Cable-Assemblies-8077.png)
DIN IDC Cable Connectors and Cable Assemblies
FCI Basics DIN IDC cable connectors are available in 4 connector sizes as 96, 42, 21, and 9 positions. Available in wire sizes 30AWG to 24AWG, their unique insulation displacement design grants the lowest installed cost for users. Standard accessories are also offered to make up a fully modular system.
![Product DIN Power](https://staph.blob.core.windows.net/images-products/DIN-Power-2245.png)
DIN Power
FCI Basics DIN Power connector offers contacts with medium power of 5.5A and high power of 15A range. This series includes connectors for board-mount or rack applications and is available in vertical receptacle and right-angle header mating combination. A mix of both medium and high power is also available.
![Product Diode Connectors](https://staph.blob.core.windows.net/images-products/Diode-Connectors-2372.png)
Diode Connectors
Offer the versatility of a standard connector, with transient protection for sensitive circuits, such as TTL Lines. Failures generated by load switching, lightning, electrostatic discharge (ESD), and an electromagnetic pulse (EMP) can destroy unprotected IC components. Compatible with present filter connector assembly procedures, diodes can stand alone or can be combined in series with filters.
![Product Direct Connect Trunks](https://staph.blob.core.windows.net/images-products/direct-connect-trunks-1946.png)
Direct Connect Trunks
Amphenol hybrid or discrete trunks offer power/fiber connectivity that is optimized for fast deployment and easy installation in FTTA. A single trunk enables connectivity to several RRHs without the need for a tower top distribution box. The metal canister breakout point provides a secure and reliable hoisting and grounding mechanism, while also delivering a fully sealed and robust transition.
![Product DisplayPort](https://staph.blob.core.windows.net/images-products/DisplayPort-1423.png)
DisplayPort
HIGH-PERFORMANCE DIGITAL AUDIO/VIDEO INTERCONNECT SOLUTION
Amphenol DisplayPort connector system is a scalable solution that transmits 1, 2, or 4 lanes of High-Definition video at 2.7Gb/s per lane up to a maximum of 10.8Gb/s. DisplayPort also allows flexible allocation of available bandwidth between audio and video.
![Product Distributed Power & Control / Factory Automation Cables](https://staph.blob.core.windows.net/images-products/distributed-power-and-control-factory-automation-cables-Thumbnail.png)
Distributed Power & Control / Factory Automation Cables
Distributed power and control, factory automation cable assemblies, and connectors for use in most robotic and material handling systems, such as conveyors, sorting, automated storage and retrieval, packaging, overhead transport, palletizing, and any other options imaginable.
![Product Distribution Box](https://staph.blob.core.windows.net/images-products/distribution-box-5964.png)
Distribution Box
Amphenol LTW's distributor boxes are designed in multiple ports with different connector or cable terminations. The embedded LED indicators provide you an overview data, signal or power delivery, especially in industrial automation applications.
![Product Distribution Module 2759](https://staph.blob.core.windows.net/images-products/Distribution-Module-2759-4825.png)
Distribution Module 2759
Distribution module with 6 crimp Twinax contacts for military aircraft and helicopters. Twinax contacts are available for various cable types.
![Product Distribution Network Antennas](https://staph.blob.core.windows.net/images-products/Distribution-Network-Antennas-3844.png)
Distribution Network Antennas
Amphenol’s series of miniature data cards and USB dongle antennas for 3G, 3.5G, and 4G LTE applications provide the performance to power high-speed mobile internet connectivity. With volumes less than 1.5cc and a customizable geometry, these multiband antennas are easily integrated into miniature data cards.
![Product DLP® Sockets](https://staph.blob.core.windows.net/images-products/DLPR-Sockets-2424.png)
DLP® Sockets
Amphenol's sockets for DLP® products are interconnect solutions for the Texas Instruments DLP® chips suitable for ultra-mobile and portable applications. TI's DLP technology leads the industry in display and advanced light control solutions.
![Product DL Series](https://staph.blob.core.windows.net/images-products/dl-series-2056.png)
DL Series
DL Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying European safety standards and UL standards. They feature IP67 class water and dustproof, when mated, and a protective earth circuit with first mate break grounding contacts. They are ideal for use in machine tools, robots, and other industrial machines.
![Product DOCSIS Passive](https://staph.blob.core.windows.net/images-products/docsis-passive-1703.png)
DOCSIS Passive
Accommodate 8+ STBs, MoCA controllers, and modems without power supplies or amplification. This means no more premises amplifiers and some serious noise reduction. Each DOCSIS Passive provides dramatic cost savings and cleans up the network.
![Product Double Density Cool Edge 0.80mm Connectors and Cable Assemblies](https://staph.blob.core.windows.net/images-products/Double-Density-Cool-Edge-0-80mm-Connectors-and-Cable-Assemblies-5813.png)
Double Density Cool Edge 0.80mm Connectors and Cable Assemblies
The 0.80mm pitch DDCE connectors and cable assemblies offer a compact design with 2 rows of contacts. This highly configurable single-piece connector can accommodate both high-speed and low-speed signal and power. This hybrid connector reduces more than half of the PCB footprint when compared to 1.00mm PCIe Cool Edge. It supports PCIe Gen 5 and is designed for multiple Add-In- Card thicknesses.
![Product Double Lapping](https://staph.blob.core.windows.net/images-products/Double-Lapping-9876.png)
Double Lapping
Amphenol's double-sided lapping process provides the best solution for mobile device metal decorative logos. We can control part flatness tolerance within +/- 0.03mm and maintain a 1000N+ Laser weld bond between metal components. Our high-quality logos reflect a high brand value to customer end products.
![Product DPBP 70/3333-TETRA-N - Duplex Bandpass Filter](https://staph.blob.core.windows.net/images-products/dpbp-70-3333-tetra-n-duplex-bandpass-filter-1505.png)
DPBP 70/3333-TETRA-N - Duplex Bandpass Filter
The DPBP 70/3333-TETRA-N is a Duplex Bandpass Filter for the European Public Safety/mission-critical network called Tetra, but it can also highly be used for the P25 networks or LMR/PMR UHF450 (380-470 MHz) radio networks. It is specked to 200 W CW and benefits among others for having a very high TX/RX Isolation and a very low Insertion Loss due to a unique silver plating in the filter house.
![Product Dragonfly](https://staph.blob.core.windows.net/images-products/Dragonfly-Thumbnail.png)
Dragonfly
Dragonfly connectors are designed with a versatile combination of power and signal solutions in a compact design. Dragonfly series also offers PCB mount, panel mount and cable connections in a small form factor design utilizing high-reliability, high-retention and high cycle life precision machined contacts.
![Product Driver Assistance Components](https://staph.blob.core.windows.net/images-products/driver-assistance-components-7556.png)
Driver Assistance Components
RF Connectors for transmitting LVDS and Multi-Gig-Ethernet. We offer cable assembly solutions needed to transfer data within a vehicle. These are used to connect cameras, antennas as well as Radar/Lidar systems and enable scanning of the area for semi-autonomous and autonomous driving.
![Product Driver Dashboards](https://staph.blob.core.windows.net/images-products/driver-dashboards-Thumbnail.png)
Driver Dashboards
Driver dashboards with cluster displays or touchscreens. Manufactured according to customer specifications and design.
![Product DSFP 56G PAM4 SMT Connector](https://staph.blob.core.windows.net/images-products/DSFP-56G-PAM4-SMT-Connector-2258.png)
DSFP 56G PAM4 SMT Connector
DSFP SMT Connectors offer dual high-speed lanes operating at 28Gb/s NRZ and 56Gb/s PAM-4 for a 50G & 100G aggregated bandwidth solution. It has additional 2 pins compared to the SFP/SFP+ family, which enables it to have a second high-speed channel with an identical connector form factor. The DSFP shares the same unique mating interface and EMI cage dimensions as the whole range of SFP/SFP+ cages.
![Product D-Sub Accessories](https://staph.blob.core.windows.net/images-products/D-Sub-Accessories-7897.png)
D-Sub Accessories
FCI Basics D-Sub Accessories complement FCI Basics D-sub offering by accounting for the moderate to severe mechanical stresses encountered, and preventing risks like pulling up and accidental mismating. The range of derived accessories includes plastic or metalized plastic hoods, EMI/RFI shielded two-part metal hoods, various cable clamps, locking devices, dust caps, and brackets.
![Product D-Sub Accessories](https://staph.blob.core.windows.net/images-products/d-sub-accessories-3815.png)
D-Sub Accessories
In addition to a wide variety of D-Sub connectors, we offer a large assortment of Backshells, Locking Systems and Mounting Hardware. We also offer blind mate options, EMI covers, Sealing Options, and custom options to fit many different application requirements.
![Product D-Sub Cable Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-Cable-Connectors-4863.png)
D-Sub Cable Connectors
FCI Basics D-Sub Cable Connectors span across signal and power applications in computer equipment, cash register, and high-end industrial cabinets. Signal connectors are available as removable crimp contacts, and power connectors in crimp, solder bucket, and wire wrap terminations.
![Product D-Sub Connectors](https://staph.blob.core.windows.net/images-products/d-sub-connectors-Thumbnail.png)
D-Sub Connectors
Amphenol India M2000 series D sub connectors are MIL qualified & listed in QPL, Product meets the requirement of MIL-DTL-24308, M2000 series D sub subminiature Rack & Panel type connectors with a polarized shell having pin & socket machined contacts which provide high reliability & Density for the connectors.
![Product Dsub Custom Specials](https://staph.blob.core.windows.net/images-products/Dsub-Custom-Specials-3897.png)
Dsub Custom Specials
DSUB CONNECTORS FOR CUSTOM APPLICATIONS
Amphenol has proven capability to work with customers and develop special product extensions to meet their custom applications. This can be to meet special polarization requirements, fitment to their special panel cabinets, extra standoff to meet the height requirements, assemblies for cable application, etc.
![Product D-Sub Dual Port Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-Dual-Port-Connectors-4553.png)
D-Sub Dual Port Connectors
Amphenol ICC's D-Subminiature product line offers a wide range of termination options for board and cable ends, bringing down the overall cost of cable assembly and connectors significantly. The terminations include Straight, Right Angle, SMT, Press Fit, and Slim Sunk for board side, and Solder Cup, Crimping, IDC Ribbon, Solderless Wire Wrap, and Screw Termination for cable side.
![Product D-Sub Economy Range Board-Mount Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-Economy-Range-Board-Mount-Connectors-3289.png)
D-Sub Economy Range Board-Mount Connectors
FCI Basics D-Sub Economy Range Board-Mount Connectors are proven solutions designed to meet less demanding applications while meeting all their design requirements. These connectors have guaranteed durability of 50 mating cycles. Board connectors are available in straight and right-angle versions, while cable connectors are available in solder bucket and crimp styles.
![Product D-Sub High Density Board-Mount Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-High-Density-Board-Mount-Connectors-7801.png)
D-Sub High Density Board-Mount Connectors
FCI Basics D-Sub High-Density Board-Mount Connectors, based on the compact-D form factor, complete your board and system designs by providing high-density and high-speed interfaces. The high-speed, power, assembly, and mechanical packaging expertise, aids in getting the signals out of the box at optimal cost and performance, while accommodating up to 78 positions in standard shell sizes.
![Product D-Sub High Density Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-High-Density-Connectors-4120.png)
D-Sub High Density Connectors
Amphenol ICC's D-Subminiature high-density product line offers a wide range of termination options for board and cable ends, bringing down the overall cost of cable assembly and connectors significantly. The terminations include Straight, Right Angle, SMT, Press Fit, and Slim Sunk for board side, and Solder Cup, Crimping, IDC Ribbon, Solderless Wire Wrap, and Screw Termination for cable side.
![Product D-Sub High Density Connectors](https://staph.blob.core.windows.net/images-products/d-sub-high-density-connectors-Thumbnail.png)
D-Sub High Density Connectors
The I/O connection system has been a common interface to electronic applications for a long time. These products are applied to nearly all markets & applications, from industrial control to telecommunications. ALTW D-Sub connectors are developed in 5 different standard housing fit for standard/high-density pin contact & sealed for ingress protection up to IP68.
![Product D-Sub High Performance Board-Mount Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-High-Performance-Board-Mount-Connectors-6672.png)
D-Sub High Performance Board-Mount Connectors
FCI Basics D-Sub High Performance Board-Mount Connectors are designed for severe environment applications in the field of telecommunications, aerospace, military (125°C) class and for particularly severe applications, especially high temperature (+155°C) class. They feature machined contacts and is available in solder bucket, straight spills, angled spills, and wire wrap terminations.
![Product D-Sub Hybrid Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-Hybrid-Connectors-1219.png)
D-Sub Hybrid Connectors
Amphenol ICC's TW Hybrid D-Subminiature connectors offer a wide range of termination options for board and cable ends, bringing up an overall solution of cable and PCB assemblies. The terminations include Straight and Right Angle for the board side, and Solder Cup and Crimping (for power pin only) for the cable side. Each termination variant has both socket and plug connectors.
![Product D-Sub MicroTCA Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-MicroTCA-Connectors-9459.png)
D-Sub MicroTCA Connectors
FCI Basics D-Sub MicroTCA Connectors are power module I/O interconnects for 48V applications designed in accordance with TCA specifications. The concept is based on the single-shell Delta D design, and power contacts handle up to 24A. PCB connectors are proposed in traditional Solder-to-board and Pin-in-Paste versions for optimized applied cost.
![Product D-Sub Pin-in-Paste Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-Pin-in-Paste-Connectors-7716.png)
D-Sub Pin-in-Paste Connectors
FCI Basics D-Sub Pin-in-Paste Connectors are now available in Pin-in-Paste (Through Hole Reflow) versions in standard and compact form factors. Pin-in-Paste technology (PiP) allows the use of Through Hole products in SMT manufacturing processes. The connectors use high-temperature thermoplastic that can withstand reflow soldering temperatures up to 260°C to facilitate PiP soldering.
![Product D-Sub Power Board-Mount Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-Power-Board-Mount-Connectors-6798.png)
D-Sub Power Board-Mount Connectors
FCI Basics D-Sub Power Board-Mount Connectors features full power and mixed power versions specifically developed for power applications in industrial and telecom market segment. Board connectors feature preloaded power contacts from 10 to 40A with up to 8 contacts in full power versions. Cable crimp and solder power contacts feature colour-code plastic clips for easy wire gauge identification.
![Product D-Sub Press-Fit Connectors](https://staph.blob.core.windows.net/images-products/d-sub-press-fit-connectors-Thumbnail.png)
D-Sub Press-Fit Connectors
FCI Basics D-Sub Press-fit Connectors are available in single-shell Delta-D, high density, and mixed power designs, saving the cost of an additional wave soldering. The "Eye of the Needle" termination technique combined with a unique flat-rock design supports easy application by pressure on the insulator. Insertion kits are available for the process.
![Product D-Sub Slimline](https://staph.blob.core.windows.net/images-products/D-Sub-Slimline-2052.png)
D-Sub Slimline
ULTRA SLIM D-SUB CONNECTORS
FCI Basics has expanded the D-Sub connectors with a modified ultra-slim body with contact alignment in a single row. These are available both in SMT termination suitable for reflow soldering and solder tail version for standard wave soldering. These connectors also feature solderable retention pegs that absorb vibration.
![Product D-Sub SMT Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-SMT-Connectors-5305.png)
D-Sub SMT Connectors
D-Sub connectors are now available with Surface Mount Termination (SMT) in standard form factors. The connectors use high-temperature thermoplastic that can withstand reflow soldering temperatures up to 260°C to facilitate SMT soldering. The products are UL recognized and lead-free.
![Product D-Sub Standard Board Mount Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-Standard-Board-Mount-Connectors-2146.png)
D-Sub Standard Board Mount Connectors
FCI Basics D-Sub Standard Board Mount Connectors are standard density I/O products widely across various market segments. The stamp and rolled contacts complementing the full metal shells are available in solder, straight, and angled versions. They also come with single-shell (Delta-D) and double-shell designs.
![Product D-Sub Standard Density Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-Standard-Density-Connectors-4637.png)
D-Sub Standard Density Connectors
Amphenol ICC's D-Subminiature standard density product line offers a wide range of termination options for board and cable ends, bringing down the overall cost of cable assembly and connectors significantly. The terminations include Straight, Right Angle, SMT, Press Fit, and Slim Sunk for board side, and Solder Cup, Crimping, IDC Ribbon, Solderless Wire Wrap, and Screw Termination for cable side.
![Product D-Sub Waterproof Connectors](https://staph.blob.core.windows.net/images-products/D-Sub-Waterproof-Connectors-4916.png)
D-Sub Waterproof Connectors
Amphenol ICC's IP67 Waterproof D-Subminiature product line offers the terminations for board and cable ends, bringing down the overall cost of cable assembly and connectors significantly. The terminations include Straight and Right Angle for the board side and Solder Cup for the cable side. Each termination variant has both socket and plug connectors.
![Product Dualok High-Vibration](https://staph.blob.core.windows.net/images-products/Dualok-High-Vibration-9532.png)
Dualok High-Vibration
Dualok is an enhanced anti-decoupling mechanism designed to perform under severe vibration environments. The Dualok system is proven to mitigate the negative effects of high vibration operation by eliminating connector back-off and reducing conditions that can cause fretting corrosion. Dualok is compatible with D38999 Series III receptacles and is qualified to Boeing BACC63EK.
![Product Dual Port](https://staph.blob.core.windows.net/images-products/Dual-Port-Thumbnail.png)
Dual Port
Positronic Dual Port series utilize two (or more) D-sub connectors that are vertically stacked and assembled into a single connector unit. This allows for space savings on panels and printed boards. Dual Port series connectors are recommended for use in sheltered, non-corrosive indoor or outdoor environments.
![Product Dubox® 2.54mm](https://staph.blob.core.windows.net/images-products/DuboxR-2-54mm-8053.png)
Dubox® 2.54mm
The Dubox®, connector family offers an extensive range of through-hole and surface-mount part options. It is available in single or double-row in both straight and right angle orientations from 2 to 50 positions, with a maximum current rating of 3A per individual contact. This cost-efficient solution offers high reliability in electrical performance.
![Product Dubox® 2.54mm Crimp to Wire](https://staph.blob.core.windows.net/images-products/DuboxR-2-54mm-Crimp-to-Wire-5156.png)
Dubox® 2.54mm Crimp to Wire
The Dubox®, connector families offer an extensive range of through-hole and surface-mount part options, including single or double-row in either straight or right-angle orientation from 2 to 50 positions, with a current rating of 3A (maximum) per individual contact. The Dubox® contact has a pre-stressed, dual-beam design to enable low insertion force, 4-wall contact design for signal protection.
![Product Duflex™ Flex Connectors](https://staph.blob.core.windows.net/images-products/DuflexT-Flex-Connectors-4297.png)
Duflex™ Flex Connectors
FCI Basics Duflex™ connectors represent a low-cost and reliable solution for terminating FPC/FFC and touch membrane switches. These are designed for 2.54mm grids. The Duflex connector combines the advantage of the well-proven Dubox™ receptacle with the assembly speed of IDC termination techniques. These connectors are available in both single and double row versions with up to 36 contacts per row.
![Product DuraMate™ Family](https://staph.blob.core.windows.net/images-products/duramatet-family-9936.png)
DuraMate™ Family
Amphenol Sine Systems’ DuraMate™ Family of IP68/69K rated (mated), environmentally-sealed, multi-pin, heavy-duty, plastic (AHDP) or metal (AHDM), circular connectors provide an economical, quick-connect, bayonet locking system manufactured to withstand the challenges and complexities of harsh environment off-road applications.
![Product DVI Connectors](https://staph.blob.core.windows.net/images-products/dvi-connectors-Thumbnail.png)
DVI Connectors
Amphenol LTW DVI Connectors feature a 1.5A current rating, a ≤20mΩ contact resistance, and a ≥1000MΩ @ 500VDC insulation resistance rating. These DVI Connectors have a copper alloy, gold-plated contacts, and steel, nickel-plated shell.
![Product EazyPwr™ IP67 Field Installable Connector](https://staph.blob.core.windows.net/images-products/EazyPwrT-IP67-Field-Installable-Connector-4741.png)
EazyPwr™ IP67 Field Installable Connector
EazyPwr™ IP67 field-installable connector provides the next generation of custom power with up to 125A per contact. The metal latching system ensures a reliable connection between the mated pair. The water-tight plug and screw-on cap can be removed easily. Wide range of customizable components to fit specific application needs. Rubber sealing provides IP67 protection.