Mobile Networks
Amphenol is a leading global interconnect solutions provider to the mobile networks market and offers a wide product portfolio, including antennas, connectors and interconnect systems. Our products are used in current and next-generation wireless communications standards, including in 5G networks. We works with service providers around the world to offer an array of antennas and installation-related site solution interconnect products. We provide solutions that span antenna systems, base stations, combiners, filters and amplifiers, core network controllers, distributed antenna systems (DAS), mobile switches, radio links, small cells and wireless routers.
Mini Cool Edge 0.60mm Connectors
Mini Cool Edge is a 0.60mm high density, high-speed card edge connector for a new generation small form factor system. These fine pitch solutions offer multiple BTB applications like a right angle, mezzanine, and coplanar and support cable interconnect options. Mini Cool Edge 0.60mm meets SFF TA-1002, Gen Z, EDSFF and OCP NIC 3.0 specifications.
Mini Cool Edge IO
Amphenol ICC introduces the next-generation OverPass™ solution - Mini Cool Edge IO. The 0.60mm pitch connector comes with a slim form factor design, capable of transmitting a high-speed signal up to 56G PAM4, and allowing much greater signal path lengths while maintaining SI performance when compared to conventional PCB routing methods.
Minitek® Board-In 2.00mm and 2.50mm Connector
Minitek® Board-In connector system is a flexible solution designed for economical and permanent wire-to-board applications up to 3A. It is a one-piece direct solder-to-board solution that provides space and cost savings compared to a two-piece connector system. It is currently offered in 2-16 positions under 2.00mm and 2.50mm pitch sizes covering vertical and horizontal configurations.
Minitek® Pwr 3.0 BMI Connector System
FCI Basics Minitek® Pwr 3.0 Blind Mate Interface (BMI) is a flexible and comprehensive solution designed for power applications with a current rating of up to 5A per contact. These connectors provide an ideal solution for wire-to-board applications. Minitek® Pwr 3.0 BMI is featured with scoop-proof housings that prevent terminals and headers from damage during angled mating.
Minitek® Pwr 3.0 Connector System
FCI Basics Minitek® Pwr 3.0 is a flexible and comprehensive solution designed for power applications with a current rating oup to 5A per contact. It is available in 2 to 24 circuits for dual row and 2 to 12 circuits for single row. Crimp, snap-in header and receptacle contacts are used to terminate 30-20AWG wires. Header and receptacle housings allow wire-to-wire and wire-to-board configurations.
Minitek® Pwr 3.0 High Current Connector
3.0MM HIGH CURRENT SOLUTION WITH CURRENT RATING UP TO 12A
FCI Basics Minitek® Pwr 3.0 High Current Connector (HCC) is designed for high-current, and power-dense applications with a current rating of up to 12A per contact and wire gauge range from 20AWG-16AWG. These are used for both wire-to-wire and wire-to-board applications. It is available in 2 to 24 circuits for dual row.
Minitek® Pwr 4.2 BMI Connector System
FCI Basics Minitek® Pwr 4.2 Blind Mate Interface (BMI) is a flexible and comprehensive solution designed for power applications with a current rating of up to 9A per contact. These connectors provide an ideal solution for wire-to-board applications. Minitek® Pwr 4.2 BMI is featured with scoop-proof housings that prevent terminals and headers from damage during angled mating.
Minitek® Pwr 4.2 Connector System
FCI Basics Minitek® Pwr 4.2 is a flexible and comprehensive solution designed for power applications with a current rating ofup to 9A per contact. It is available in 2 to 24 circuits in dual row and 3 to 5 circuits in single row. Crimp, snap-in header and receptacle contacts are used to terminate 38AWG-16AWG wires. Header and receptacle housings allow wire-to-wire and wire-to-board configurations.
Minitek® Pwr 4.2 High Current Connector
FCI Basics Minitek® Pwr 4.2 High Current Connector (HCC) is designed for high-current, and power-dense applications with a current rating of up to 13A per contact and wire gauge range from 20AWG- 16AWG. These are used for both wire-to-wire and wire-to-board applications. It is available in 2 to 24 circuits for dual row and 3 to 5 circuits for single row. Current rating up to 13A per contact.
Modular Jack - RJ45
FCI Basics Modular Jacks include single and multi-port solutions that are widely used in Telecom, Data, Networking, and Home Entertainment markets for various applications. Modular Jacks Cat 3 supports the transmission of 16Mbps signals targeted to phone, modem, POS terminal machines and Cat 5 supports the transmission of 100Mbps signals targeted to switch, router, hub, etc.