Mobile Networks
Amphenol is a leading global interconnect solutions provider to the mobile networks market and offers a wide product portfolio, including antennas, connectors and interconnect systems. Our products are used in current and next-generation wireless communications standards, including in 5G networks. We works with service providers around the world to offer an array of antennas and installation-related site solution interconnect products. We provide solutions that span antenna systems, base stations, combiners, filters and amplifiers, core network controllers, distributed antenna systems (DAS), mobile switches, radio links, small cells and wireless routers.
ExaMAX® 56Gb/s High-Speed Backplane Connector 85Ohm
The ExaMAX® 85Ohms backplane connector system is designed for higher bandwidth applications from 25Gb/s to 56Gb/s. Optimized connector design delivers superior signal integrity performance resulting in low crosstalk noise and low insertion loss. Each signal wafer incorporates an innovative one-piece, embossed ground structure to improve crosstalk performance through 56Gb/s.
ExaMAX® 56Gb/s High-Speed Orthogonal Connector
The ExaMAX® high-speed orthogonal connector system is designed to enable superior 25Gb/s electrical performance and provide a path to 56Gb/s in anticipation of further increases in bandwidth requirements. The 6-Pair orthogonal right-angle header connector solution further expands the range of applications supported by the ExaMAX® connector system.
ExaMAX® VS High-Speed Backplane Connector
The ExaMAX® VS backplane system is a scalable, cost-optimized connector system designed for higher bandwidth applications up to 25Gb/s. The high-performance connector system provides both mechanical robustness and superior signal integrity, minimizing channel performance variation for every differential pair.
ExpressPort® QSFP+
Amphenol's ExpressPort® QSFP+ interconnect system is comprised of a 38 position 0.8mm pitch SMT connector, & a press-fit cage. With four channels of data in one pluggable, the system interface is capable of transferring data up to 16Gb/s per Channel, & replacing up to 4 standard SFP+ receptacles. These features result in greater port density & overall cost savings over traditional SFP+ products.
Extremeport-Flash
Amphenol’s Extremeport-Flash is an extreme low mating height, easy-to-release high-speed cable solution. We designed 95ohm Flash mainly to support near chip (under heat sink) to IO application, and the mating height is lower than 5mm. Flash can support 56G PAM4, and scalable to 112G PAM4 application, and plug is with pull tab design feature for easy release.
Extremeport-MCIO(Mini Cooledge IO)
Amphenol's Mini Cooledge IO(MCIO) is a high-speed, small mechanical size cable solution. Amphenol MCIO product is now being specified in the SFF group and the project number is SFF-TA-1016. MCIO cable can support PCIe Gen5, and is scalable to PCIe Gen6 and 112G PAM4. We developed 85ohm and 95ohm solutions to support different applications.
Extremeport-Swift
Amphenol’s Extremeport-Swift is an extreme low profile(mating height<9mm), robust mechanical, and excellent SI performance cable solution. The cable assembly and connector can support PCIe Gen5, and the SI performance is scalable to PCIe Gen6 and 112G PAM4. We can provide straight, right angle, and side exit plug types with 38pin, 74pin, and 124pin to support customers to optimize system layout.
ExtremePort™ Flash Connector
Amphenol introduces the next-generation OverPass™ solution - ExtremePort™ Flash. The 0.60mm pitch connector comes with an extremely low profile design capable of transmitting a high-speed signal up to 56G PAM4, and allows much greater signal path lengths while maintaining SI performance when compared to conventional PCB routing methods.
ExtremePort™ QSFP DD 112G Connectors
Amphenol's ExtremePort™ QSFP DD 112G interconnect system is comprised of a 76 position, 0.8mm pitch connector built for use in high-speed serial applications. Each port supports up to 800Gb/s in aggregate over an 8 x 112Gb/s electrical interface. The cage and connector design provides backward compatibility to QSFP56...
ExtremePort™ Swift Connectors
Amphenol has developed the ExtremePort™ Swift connector which is used in the application of PCIe® Gen5 signal NRZ 32GT/s, UPI 2.0 24GT/s, 24Gb/s SAS signal. With 0.6mm contact pitch, ExtremePort™ Swift solutions are smaller than mainstream connectors in the current market to save space in the end device.