Search Results for 21-299717

Environmentally-Sealed, Multi-Pin, Heavy-Duty, Metal Circular Connectors Size 18 with 6 insert arrangements 2, 6, 8, 14, 20 and 21 Size 24 with 14 insert arrangements 7(x2), 9, 14, 16, 18, 19, 21,… October 9, 2023

Capacitance(conductor to shield / drain @ 70 °F (21 °C)) <130 pF/ft <427 pF/m Insulation Resistance(@ 70 °F (21 °C)) ≥ 1T Ohm ≥ 1T Ohm Insulation Resistance(@900°F (482 °C)) ≥ 108 Ohm Physical Cable Jacket Diameter .059 in 1.5 mm [1] Cable Jacket Material Stainless Steel Stainless Steel Conductor Style Solid Solid

Front-to-Back Ratio, Total Power, ± 30° dB 23 22 21 21 19 First Upper Side Lobe dB 14 13 15.6 15.4 16 Cross-Pol Over Sector dB 2 1 1 1.3 2 Cross Polar Discrimination (XPD) at Mechanical Boresight (0°) dB 21 21 15 17 18 Maximum Effective Power Per Port Watts 250 W Cross Polar Isolation dB 26 Interband Isolation dB 26

First Upper Side Lobe dB > 15.6 > 21.4 > 21.1 > 21.9 > 22.5 Maximum Effective Power Per Port Watts 200 W Isolation Between Ports dB > 26 4-Port Panel Antenna (2x) 1695-2690 MHz Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational ...

AMPHENOL CORPORATION Amphenol Industrial Phone: 888-364-9011 191 Delaware Avenue Sidney, NY 13838-1395 www.amphenol-industrial.com Amphenol® 97 Series Connectors are UL recognized and CSA recognized.

Single-mode, multi-mode options using MIL-PRF-29504, ARINC 801, or JSFC terminis, as well as MT ferrules.

Machined Contacts, Pins and Sockets Part Number Description Size AWG Type Amps AT60-203-04141-4 Male Contact - Pin, Copper Alloy, Nickel-Plated 4 4 Machined 100A

M17/21-RG26 No AA-5125 TC 19/.0117” Rubber-E 34TC Rubber-IV Alum. Braid 0.210 48 +/-4 50.0 10,000 -40 +185 1 MHz Coaxial Pulse Cable QPL’d 0.0585 0.288 0.317 0.425 0.505 Unswept Armored Source (1.49) (7.32) (8.05) (10.80) (12.83) (0.313) 42 (164.1) (-40 +85) M17/22-RG27 No AA-5163 TC 19/.0185” Rubber-D 34TC Rubber-IV Alum. ...

21 22-21 21 23 16-2322 1 24 20-2424 25 20-2525 26 16-2626 27 20-2727 30 18-3029 1 32 18-3232 32 22-3232 34 22-3434 36 22-3636 39 20-3937 2 41 20-4141 41 22-4127 14 55 22-5555 61 24-6161 OVERVIEW Additional contact arrangements upon request. These include coaxial, high-voltage, and thermal contacts.

Temposonics® RP is a high-performance sensor for external mounting. The position magnet, mounted to the movable machine part, can either be an U-magnet or a captive-sliding magnet. The free magnets travel along the sensor profile with a defined distance. This kind of installation tolerates a lateral offset as well as a height offset. A superior performance for instance in plastic and rubber ...

I 3 I Temposonics® EE Analog Data Sheet TECHNICAL DATA Output Current 4…20 mA or 20…4 mA (minimum / maximum load: 0 / 500 Ω) Measured value Position Measurement parameters Resolution Infinite Cycle time < 3 ms Linearity 1 < ±0.02 % F.S. (minimum ±60 µm) Repeatability < ±0.002 % F.S. (minimum ±20 µm)

Temperature Range(Compensated) +70 to +150 °F +21 to +66 °C Temperature Effect on Output(Maximum) ± 0.01 %RO/°F ± 0.018 %RO/°C Temperature Effect on Zero Balance(Maximum) ± 0.01 %FS/°F ± 0.018 %FS/°C Electrical Bridge Resistance 350 Ohm 350 Ohm Excitation Voltage(Recommended) 10 VDC or VAC rms 10 VDC or VAC rms

Title: c908-22106.ps Created Date: 12/13/2001 3:45:21 PM

Suited for wiring optimization, then offering weight and cost savings, these track-mounted modules (on metallic track) are available from 6 contacts size 12 up to 21 contacts size 22 in different contact configurations.

The Matrix MIL-DTL-5015 is a crimp, rear-release high power connector that provides an improved alternative to the older MIL-C-5015 solder type.

First Upper Side Lobe Suppression dB 20 21 21 19.5 19 Cross Polar Discrimination Over Sector dB 11 13 14 9 7 Cross Polar Discrimination (XPD) at Mechanical Boresight (0°) dB 26 25.3 24 29 25 Maximum Effective Power Per Port Watts 250 W Cross Polar Isolation dB 28 Interband Isolation dB 28 Specifications follow BASTA guidelines.

Amphenol is committed to creating a more sustainable manufacturing presence throughout our factories. Our manufacturing locations now use more natural light to minimize the use of electric lighting, we have installed water fill stations to encourage the use of reusable water bottles and our product packaging has been redesigned to minimize water and improve customer usability.

Uses precision ARINC 801 fiber optic termini (typical multi-mode insertion loss is less than 0.15 dB). Removable alignment sleeve insert for easy cleaning of fiber optic termini.

Amphenol ’s MIL-DTL-55302 Low Mating Force r ectangular c onnector series is one of the highest performing board connectors in the world, with proven performance on the ground, in the air, and at sea. This series utilizes the B3 brush contact system known for low mating force, stable electrical performance in high vibration, and extended service life.

unless otherwise specified tolerances are: drawn 5mb 1o/3/0b mfg prr 7/21/0b epcb p/ezotron/cs'" chk'd engr jf 7/1/08 app'd bm 7/15/08 sales wdc 7/7/08 3425 walden ave. depew, ny 14043 title (716) 684-0001 e-mail: [email protected] inst alla tion drawing code dwg.no. model 355xxx & 357xxx series ident. no. 18864 52681 ring accelerometers