Search Results for 3 in connector

In these applications we offer connectors with tight pin pitch. Examples are MEG-Array which is a grid of 1mm high speed signals and grounds or BergStak as low as 0.4mm signals spacing. Stack Heights In mezzanine applications, the distance between the two stacked interconnected boards. Backplane connectors that have been adapted to mezzanine ...

the direction normal to the bottom of the connector is best. The shipping cover and screws can be discarded or stored. FIGURE 11: SEPARATING CONNECTOR FROM SHIPPING COVER AND SCREWS Step 3: Install connector on PCB NOTE: It is important to allow some slack in the cable bundle between the two

Search Results for pl18u-300-70 3 dBd colinear Antenna for the Base Station and Maritime VHF Band Operating temperature range -30 °C to +70 °C ORDERING Model Product No. CXL 2-3 110000130 CXL 2-3 Page: 2 of 3 Last edited: 2022/08/17. ... Originally intended for use as a video connector in radar applications, UHF coaxial connectors are general ...

Temposonics® accessories for industrial sensors Catalog I 6 I 1.2 U-magnets Drawing Name & part number Description Series & design Ø 63.5 Ø 4.5 (Ø 0.18) (Ø 2.5) Ø 41.3 (Ø 1.63) Ø 16

Reverse Bayonet Coupling Connectors ... †10SL-4 arrangement available only with pin contacts in receptacle and socket contacts in plug 20-2 D 1 1 20-3 D 3 3 20-4 D 4 4 20-6 D 3 3 20-7 D/A 8 8 20-8 Inst. 6 2 4 20-9 D/A 8 1 7 20-11 Inst. 13 13 20-12 A 2 1 1 20-14 A 5 2 3 20-15 A 7 7

Model 102A07:High resolution ICP® pressure sensor, 50 psi, 100 mV/psi, 3/8-24 mtg thd with jamb nut, accel. comp., ground isolated

Electrical Connector: 1/4-28 4-Pin: 1/4-28 4-Pin: Electrical Connection Position: Side: Side: Mounting Thread: 10-32 Female: 10-32 Female: Mounting Torque: 10 to 20 in-lb: 113 to 225 N-cm * All specifications are at room temperature unless otherwise specified. Accessories. Supplied: 080A109:

at04-4p-pm11 4 Position, Receptacle with Flange, Pin, PanelMate™ AT, Self-Threading, Gasket, Standard Diameter Rear Seal (Red), Black Body (Requires Wedgelock AW4P. ... Male Connector with Reduced Diameter Seal (E-Seal) and End Cap, Grey. Comparable to PNs# DT04-4P-CE01, 934443102

connectors are rapid mating multi-pin connectors, engineered to provide reliable yet convenient electrical connections for a wide variety of industrial and commercial applications. P-lok connectors may be implemented where threaded Mil-C-5015 connectors or their commercial equivalents might be specified. P-lok features the same

PwrBlade ® is one of Amphenol’s legacy brands and is known for high-performing connectors in different capacities. The latest to this family is the PwrBlade ® MiniMezz connectors, with enhanced features in a smaller profile.These lowest profile hybrid mezzanine connectors are available in stack heights ranging from 8mm to 20mm with options for power & signal contacts.

Ver 1.0, 4-pin connector, incl. both 6-32 & M3 fasteners Installation and Operating Manual For assistance with the operation of this product, ... (Per IEEE 1451.4) Yes Yes [3] Environmental Overload Limit(Shock) ± 5,000 g pk ± 49,050 m/s² pk Temperature Range(Operating) -65 to +200 °F -54 to +93 °C Temperature Response See Graph See Graph [1]

Parallel connectors are a type of electrical connector used to join two or more wires together side-by-side. They provide a secure and reliable connection, as the wires are inserted into a metal or plastic housing and secured in place with screws or clamps. Parallel connectors are commonly used in automotive, marine, and industrial applications, and they come in various sizes and colors to ...

Lynx™, Mezzanine Connectors, Receptacle, 3.2mm HT 160 pin, with cap. 11828-2DA. Lynx™, Mezzanine Connectors, Receptacle, 3.2mm HT 160 pin, with kapton tape. Part Specification Detail. Part Specification Detail. The information below is for reference only. For more technical details, refer to product specification and application specification.

Model 352A73:Platinum Stock Products; Miniature, lightweight (0.3 gm), ceramic shear ICP® accel., 5 mV/g, 2 to 10k Hz, titanium housing, 10-ft flexibl

SV Microwave’s new Edge-Lock PCB connector series is developed to form an interference fit between the conical alignment pin and the PCB thru-hole, thus pulling the contact lane of the connector in to the edge of the PCB. ... SMA, 3.5mm; Temperature Rating-65°C to +165°C; Corrosion (salt spray) MIL-STD-202, Method 101, Condition B ...

[3] The low frequency response is accurate within ±25% of the specified frequency [1] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate a charge output sensor. ... Electrical Connector (Output) 10-32 Coaxial Jack: 10-32 Coaxial Jack: Size - Diameter: 0.50 in: 13 mm: Size - Length: 3.0 in: 76 mm ...

Our A Series™ is a line of heavy duty plastic rectangular & circular connectors, which include AT, ATP, ATM and AHD Series™ RT062028PNH-K Plug Kit, 28 Position, Male, Shell Size 20, with Machined Contacts.

These connectors are ideal for high frequency printed circuit board applications where precision is key. Current configurations include male interfaces in the SMP and SMPM series. ... ≥ -80 dB DC - 3 GHz ≥ -65 dB 3 - 26.5 GHz; Dielectric withstanding Voltage: 500 VRMS; Mating Cycles - SB: 1000; Mating Cycles - LD: 500; Mating Cycles - FD ...

Search Results for ms3106e-22-19s torque New Updates in ix Industrial™ Standards - amphenol-cs.com New Updates in ix Industrial™ Standards. Aug 16, 2023. ix Industrial™ (10-pin rectangular connector compliant with IEC 61076-3-124) is now added to the list of CC-Link IE TSN Specifications.

Minitek ® Multipitch Wire-to-Board connectors are offered in 1.25mm and 1.50mm compact pitch sizes. While 1.25mm connectors have a current-carrying capacity of 1A and external cable diameter from 28AWG to 26AWG, the 1.50mm connectors come with a current-carrying capacity of 2A and external diameter from 28 AWG to 24 AWG.