Search Results for 3 pin connector

25-pin, D-style connector for use with SKF data collectors. Connector Style: D-Sub; Connection Type: 25-pin; Temperature Range: -67 to +221 °F (-55 to +105 °C)

recommended panel cutout. 3.1 current rating: 13 amps. 3.2 operating temperature: -55°c to +125°c. 3.3 dielectric withstanding voltage: less than 2 milliamps current leakage @ 1500 volts ac. 3.4 insulation resistance: 1000 megohms min @ 25°c.

The connector provides a maximum current rating of 4A/pin. Amphenol Communications Solutions FFC/FPC Connectors (0.50mm pitch) 0.50mm pitch flex connectors utilize 0.50mm contact spacing to terminate mobile devices across a variety of applications. ... The connector series comes with a wide height range of 0.70mm to 5.80mm with 4 to 80 contact ...

ExaMAX ® 56Gb/s High Speed Backplane Connector 92Ohm, 3-Pair, 8 column, 88 position, Right Angle Header, No Guide Pin. ... 88 position, Right Angle Header, No Guide Pin. Amphenol is one of the leading manufacturers of examax 56gb/s high speed backplane connector. Contact us today for more details of examax , part number 10128415-101LF . https ...

Connection type 1 × M12 male connector (4 pin) or single wires or cable outlet Operating voltage 12 VDC (8…32 VDC) 24 VDC (8…32 VDC) Current consumption Typ. < 100 mA Typ. < 50 mA

search results for ms3108a10sl-4s at11-027-0405 contact removal tool, plastic, size 4, 4awg specifications: 3.1 current rating: 100 amps. 3.2 voltage rating: 1000 v ac/dc. 3.3 operating temperature: -55°c to +125°c. 3.4 dielectric withstanding voltage: less than 2 milliamps current leakage @ 3000 volts ac. 3.5 insulation resistance: 1000 ...

3.0 oz: 85 gm: Electrical Connector: 4-Pin, M12: 4-Pin, M12: Electrical Connection Position: Side: Side: Mounting: Through Hole: Through Hole: Mounting Torque (Through Bolt) 2 to 5 ft-lb: 2.7 to 6.8 n-M * All specifications are at room temperature unless otherwise specified. Accessories. Supplied:

16.3 gm: Electrical Connector: 4-Pin : 4-Pin : Electrical Connection Position: Side: Side: Mounting: Through Hole: Through Hole * All specifications are at room temperature unless otherwise specified. Accessories. Supplied: ACS-172: 1: 080A152: Easy Mount Clip for Series 3701 and 3711 DC Response Accelerometers: 1:

Connector 1-2 3-4 Polarization XPOL XPOL Azimuth Beamwidth (avg) ... MDDU Two male AISG 8 pin connectors (type IEC60130-9 Ed 3.0) Field Replaceable Unit Yes ELECTRICAL DOWNTILT CONTROL For multiband antennas, electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).

Model 641B00:Industrial vibration sensor, 4 to 20 mA output, 0 to 0.5 in/sec RMS, 10 to 1k Hz, top exit, 2-pin conn.

A D 3 4 Cable with M12 female connector (4 pin) for connection type D34 (Analog) (part no. 254 897-1) A D 6 0 Cable with M16 female connector (6 pin) for connection type D60 (Analog) (part no. 254 989-1) A S 0 0 Cable with 6 × terminal clamps for connection type

Connector Type YEL (Yellow), GRN (Green), RED, ORG (Orange) Receptacle - 04 Plug - 06 Strain Relief SR01 - SR01 Strain Relief, Standard Diameter Rear Seal (Red) No. of Positions SR02 - SR02 Strain Relief, Reduced Diameter Rear Seal (Green) 2, 3, 4 or 6 Contact Type Socket - S Pin - P AT 04 - 08 P A - SR2 BK AT Series Body Color

connector specifications: 3.1 current rating: 40amps 3.2 cable assembly operating temperature: -40 to +100c 3.3 contact: copper alloy, nickel plated ... ws 3/25/2022 none 1 pos recept sz 12 molded, pin size 12, 10awg, single-ended wired assy, amphenol athd connector athd04-1-12p, x meters before overmold

Electrical Connector: 1/4-28 4-Pin: 1/4-28 4-Pin: Electrical Connection Position: Side: Side: Mounting: Through Hole: Through Hole * All specifications are at room temperature unless otherwise specified. Accessories. Supplied: 039A23: Allen wrench, 5/32" hex head (for use with 10-32 thd cap screws) 1:

The M12 connector must use a socket designed to maintain positive compressive force on the connector pin with a minimum diameter of 0.889 mm and maintain a degree of ingress protection of at least IP54 when mated with the integral plug

250 W. Within Airmar’s entry-level P19 is a single, tilted, 200 kHz, element. Tilted Element ™ transducers have the element fixed at a 20°, 12°, or 0° angle within the housing. Because the transducer is installed almost flush to the hull, the tilt corrects for the hull deadrise and orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

Vibration transmitter, 4-20 mA output proportional to peak acceleration vibration, 10 g full-scale measurement range, ±5% tolerance at full scale, operates up to 105°C, top exit 2-pin MIL-C-5015-style connector

48 pin MT contacts J1, 2, 3 HQDP Samtec headers 32 Ports of 10G-Base-KR or 8 ports of 40G-Base-KR4 ... 3.224 ± .010 CONNECTOR J3 1.613 ± .005 SAMTEC MOUNTING BUSHING OF CONNECTOR MS51957-13 SCREW NAS620C4 WASHER 4 PLACES SAMTEC CONNECTOR P/N: QSH-020-01-C-D-DP 2.000 ±.010 CONNECTOR J2

Vibration: 20g@[20-2000Hz] per MIL STD-883 Method 2007.3 The LEAP® On-Board Transceiver has first been introduced by AAOP in its commercial version (12TRx; 25Gbps per channel; 300Gbps aggregate in each direction) in 2015 to serve the needs for high-density and high-data rate applications in datacenters, supercomputers and 5G broadband ...