Search Results for 30-271

vibration signal of 30 µg is about 30 times greater than the noise. This is very useful information. In this same example, this means that if we look at a 1 Hz wide window, at a frequency of 10 Hz, the signal output due to noise will be less than 10 µg. Broadband noise Broadband noise makes this same calculation. However, instead of looking ...

Hoffman Products is an electrical components accessory line at TPC Wire & Cable Corp. that offers a diverse selection of electrical products such as terminals, connectors, cable ties, alligator

Lead Time for 21-30 is 10 Dys. Lead Time for 21-30 is 10 Dys. Product Description; Specifications; Documents & Downloads; 4-conductor, low noise, shielded FEP cable, 10-ft, mini 4-socket plug to (3) BNC plugs (labeled X, Y, Z) Cable assembly consists of the following components: Model 034 cabling

2.92 mm connectors utilize a smaller internal body diameter and unique air dielectric which allows it to operate up to 40 GHz. With a shorter male pin than both the SMA and 3.5 mm connector, the bodies of the male and female connectors engage before the pin and socket contacts.

600 W. The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a single, 50/200 kHz ceramic element.

We strive to make our products feature rich appropriate for marine operations such as resistant to windspeed up to 200 km/h, ATEX rated when hostile conditions are a possibility, and operating temperatures between -30°C to +70°C.

Features. Depth only; 1 kW of power; Dual-frequency elements: 50 kHz with a 19° beamwidth for depth performance to 735 m (2500') 200 kHz with a 6° beamwidth for depth performance to 294 m (1000')

1 pl dec ±0.30 2 pl dec ±0.15 quantity signatures fractions ±1/64 angles ±1° approval: engineer: checked: drawn: scale: date part number dwg no: revision c-type sheet of description item this drawing is supplied for information only. design features, specifications and performance data shown hereon are the property of the amphenol ...

Operating voltage +12…30 VDC ±20 % (9.6…36 VDC) Power consumption 1.2 W typical Dielectric strength 500 VDC (DC ground to machine ground) Polarity protection Up to −36 VDC Overvoltage protection Up to 36 VDC. 5 Temposonics® R-Series V RH5 SSI Data Sheet TECHNICAL DRAWING

Features. Depth and fast-response water-temperature sensor; 1 kW with depth tracking down to 400 m (1,300') Medium frequency: 60-100 kHz. 57° to 73° beamwidth (port/starboard)

SV Microwave is highly experienced over 50 years in RF connectors engineering and manufacturing. Our variety of connectors can fill all your RF requirements.

source. Generally, the power supply contains an 18 to 30 V source with a 2 to 10 mA constant current diode (CCD) (see Figure 3). When other powering schemes are used, consultation with the sensor manufacturer is recommended. A more thorough discussion of powering requirements follows.

TFOCA-II® is a 4-Channel Fiber Optic Connectors is the "next generation" deployable fiber optics connector by Amphenol Fiber Systems International

SS260 features a stainless steel housing which is compatible with all hull materials. Installed with the included, custom-fitting, High-performance Fairing, the SS260 gives excellent results at speeds up to 30 knots (34 MPH).

Airmar Chirp in-hull transducers deliver a technological advantage. We manufacture the highest quality CHIRP transducers to match your fishfinder and deliver maximum sensitivity and target resolution. Airmar’s patented Transducer ID™ makes connecting to popular brands possible including Garmin, Simrad, Raymarine, Furuno, Lowrance, Humminbird.

Airmar’s multi-use ultrasonic air ranging transducers provide reliable, maintenance-free measurement of liquid and solid levels. Safe, compact and rugged, AIRDUCER® transducers provide proven non-contact level sensing performance and are key components of measurement sensors and systems on equipment such as tanks, asphalt pavers and agricultural machinery.

For example, when running a 100 ft. (30,5 m.) cable with a capacitance of 30 pF/ft, the total capacitance is 3000 pF. This value can be found along the diagonal cable capacitance lines. Assuming the sensor operates at a maximum output range of 5 volts and the constant current signal conditioner is set at 2 mA, the ratio on the vertical axis can ...

1-30+ Layer Capability; IPC 6013 class 3; Complex balanced & unbalanced structures; Acrylic, Epoxy and Adhesiveless Polyimide; Custom Surface Finishes Available; Flex Assembly Services; Customized Forming (Book-Binder flex-rigid) HDI (High Density Interconnect)

Amphenol D38999 Series III PCB Connectors offer PC Tail contacts and multiple standard PCB sickout options to streamline cable-to-board wiring applications.

Model 393B04:Seismic, miniature (50 gm), ceramic flexural ICP® accel., 1 V/g, 0.06 to 450 Hz, 10-32 top conn.