Search Results for 5 pin

Buy 2.5ft Amphenol CS-DSPMHD15MF-002.5 Cables Direct from the Factory at Cables on Demand. 15-pin (HD15) Premium Male/Female Double Shielded High Density D-Sub Cables by Amphenol offer extreme resilience in installations subjected to high EMI/RFI interference such as medical, industrial, military, avionics, and broadcast facilities.

PS506 SERIES Pin Strips. Maximum number of positions: 24. Centerline Spacing: 5.00mm Spacing (0.197 ... Current Rating: 15 Amps. MECHANICAL: Soldering Tempertures: 260°C, 500°F for 5 seconds Max. MATERIAL: Insulator Body Material: Polyamide, UL 94V-0. Contact Solder Pin Material: Brass, Gold Flash. PRODUCT NOTES: Compatible with the ...

lanes supporting up to 32G (PSAS 5.0) data . rates. Mini Cool Edge IO • Up to 64Gb/s PAM4, PCIe ® Gen 4, PCIe ® Gen 5, PCIe ® Gen 6, over 1.0 meter . transmission distance • 0.60mm pitch connectors support both cable . and card edge connections • Options for 92Ω, 85Ω and 95Ω impedance . and various pin number options - meeting ...

5 Temposonics® R-Series V RH5 EtherCAT ® Data Sheet Electrical connection Connection type 2 × M12 female connectors (5 pin), 1 × M8 male connector (4 pin) or 2 × M12 female connectors (5 pin), 1 × M12 male connector (4 pin) Operating voltage 12…30 VDC ±20 % (9.6…36 VDC); the RH5 sensors must be power supplied via an external Class 2

Radially sealed flat connector housings with secondary lock. The plug housings for 1.2-mm, 1.5-mm, 2.8-mm, 4.8-mm and 9.5-mm flat connectors are used for electrical connections between the harness and the various components in the car. ngs are available for 1- to 14-pin connectors. All one- and two-row models are fitted with a.

Intrinsically safe vibration transmitter, 4-20 mA output proportional to RMS velocity vibration, 5.0 in/sec full-scale measurement range, ±5% tolerance at full scale, operates up to 85°C, top exit 2-pin MIL-C-5015 style connector, certified for use in Class I Division 1 and Zone 0 / Zone 1 hazardous locations.

D 5 6 2 × M12 female connectors (5 pin), 1 × M8 male connector (4 pin) D 5 8 2×M12 female connectors (5 pin), 1 × M12 male connector (4 pin) h Output U 2 0 1 EtherNet/IP™, position and velocity (1…20 positions) U 2 1 1 EtherNet/IP™, position and velocity, internal linearization (1…20 positions) e Number of magnets

OUTPUT TYPE PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6. Analog GND NC Vout NC NC Vs I2C GND Vs INT NC SDA SCL SPI GND Vs SS NC MISO SCLK Dimensions in inches [mm] wwwallsensorscom. Signed Original On File. 6 7. R. wwwallsensorscom. Signed Original On File. R. wwwallsensorscom. Signed Original On File. R.

Model 034G05 4-cond. shielded cable, 5 ft (1.5M), 4-pin plug to (3) BNC plugs (1) Model 080A109 Petro Wax (1) Model 080A15 Adhesive Mounting Base (1) Model 081A27 Mounting Stud (5-40 to 5-40) (1) Model ACS-1T NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. (1) Model M081A27 Metric mounting stud, 5-40 to M3 x 0.50 long (1)

Weight(without cable) 0.16 oz 4.5 gm [1] Electrical Connector 8-36 4-Pin 8-36 4-Pin Electrical Connection Position Side Side Mounting Adhesive Adhesive [3] All specifications are at room temperature unless otherwise specified.

5 Temposonics® R-Series V RH5 Analog Data Sheet Electrical connection Connection type 1 × M16 male connector (6 pin), 1 × M12 male connector (5 pin) or cable outlet Operating voltage +12…30 VDC ±20 % (9.6…36 VDC); the RH5 sensors must be power supplied via an external Class 2 power source in accordance with the UL approval

ms3106e-22-19s torque | Amphenol Global Search | Amphenol Search Results for ms3106a16s-1s PCIe Connectors | Card Edge | PCI Express® Gen 3, Gen 4 & Gen 5 Standards The connector designs provide support for 2.5GT/s (Gen 1), 5.0GT/s (Gen 2), 8.0GT/s (Gen 3) and upgrade to 16GT/s (Gen 4), even further to Gen 5 32GT/s per differential signal pair.

Radially sealed flat connector housings with secondary lock. The plug housings for 1.2-mm, 1.5-mm, 2.8-mm, 4.8-mm and 9.5-mm flat connectors are used for electrical connections between the harness and the various components in the car. ngs are available for 1- to 14-pin connectors. All one- and two-row models are fitted with a.

AT04-6P-PM14 6 Position Receptacle, Pin, Panel Mount, Self-Threading, RD01 Seal, Cap. REQUEST A QUOTE. AT04-6P-PM05 6-Way Flange Mount Receptacle with Gasket, Pin, Threaded. Comparable to PN# DT04-6P-CL09. REQUEST A QUOTE. AT04-6P-R120BL 6-Way, Receptacle, 6 Gang Buss w/ 120 Ohm Resistor, NI Pins, Soild Rear Seal, Wedgelock, Blue.

6 Step 10: Repeat steps 7 and 8 and 9 to assemble another contact assembly. Step 11: Pull one of the wires out and load. Crimp the Rear Shield (Part 5). Step 12: Repeat step 11 to assemble another Rear Shield. Notes: The recommended crimp sizes are only for reference. The customer should adjust them according to cable specification and crimp tool and test results including contact resistance ...

Mini Cool Edge IO(MCIO), SFF-TA-1016, PCIe Gen 5, 85Ω, Surfacemount, Right Angle, 148 Pin, PCIe, SAS, SFP, NVMe, cable, dual, card.

6 2 pin, MIL style, metal 6Q 2 pin, MIL style, boot M12 M12, 5 pin 6D S SKF model CMXA 50 15 El Rockwell/Entek model: Dataline™ 20 El Rockwell/Entek models: DataPac™ 1500, ENPAC™ 1200A/1200B 25 C CSI models: 2110, 2115, 2120 25 S SKF models: CMVA 10, 30, 40, 60 45 C CSI multipin Turck connector J88 2 conductor straight cable

Search Results for 10129443 ms3108e32-13px | Amphenol Global Search | Amphenol mps02-bsfa032s | Amphenol Global Search | Amphenol Search Results for n 20 252 4175 c - Amphenol N02 252 4124C - amphenol.com Part no. 252 185 Material: AIMg4.5Mn, black anodised; magnets compound-fi lled Weight: Approx. 125 g Surface pressure: Max. 20 N/mm2 ...

Connection type 2 × M12 female connector (5 pin), 1 × M8 male connector (4 pin) Operating voltage 4 +24 VDC (−15 / +20 %); UL recognition requires an approved power supply with energy limitation (UL 61010-1), or Class 2 rating according to the National Electrical Code (USA) / Canadian Electrical Code.

AHDM06-18-21PN Plug, Size 18, 21 positions, Pin, standard seal, wide thread. Comparable to PN# HD36-18-21PN Related Items. A114020-90 Nut, AHDM Series, SIZE 18. Comparable to PN# 114020-90. REQUEST A QUOTE. A114021 Lockwasher, AHDM Series, SIZE 18. Comparable to PN# 114021. REQUEST A QUOTE ...