Search Results for 5015

Model Number 601A01 PLATINUM LOW-COST INDUSTRIAL ICP® ACCELEROMETER Revision: H ECN #: 55304 Performance ENGLISH SI Sensitivity(± 20 %) 100 mV/g 10.2 mV/(m/s²) [1] Measurement Range ± 50 g ± 490 m/s² Frequency Range(± 3 dB) 16 to 180,000 cpm 0.27 to 8,000 Hz [2]

The “AN” Filter Connector is designed in configurations intermateable and intermountable with MIL-DTL-5015* connectors and provides electromagnetic interference protection for critical circuits.

Title: CPY Document

Intrinsically safe vibration transmitter, 4-20 mA output proportional to peak velocity vibration, 1.0 in/sec full-scale measurement range, ±5% tolerance at full scale, operates up to 85°C, top exit 2-pin MIL-C-5015 style connector, certified for use in Class I Division 1 and Zone 0 / Zone 1 hazardous locations

Model 641B02:Industrial vibration sensor, 4 to 20 mA output, 0 to 2 in/sec RMS, 10 to 1k Hz, top exit, 2-pin conn.

Amphenol Aerospace has multiple connector options within D38999 and 5015 designs to accommodate power requirements up to 1000 amps.

3 Suggested 67-02E 67-03E Mounting Hole Connector Size ABC Connector Size AB E F 12 .662 .062 .690 12 1.031 .750 .695 .755 14 .781 .062 .812 14 1.156 .875 .820 .880

MIL-DTL-5015 Push-Pull, quick disconnect coupling is available in a straight plug that can be ordered with or without a lanyard release mechanism.

High temperature armor jacketed FEP cable, 2-cond., twisted pair w/drain, shielded, 150-ft with 3-ft armor, 2-socket, molded composite connector (MIL-C-5015 compatible) to blunt cut

pcb.com | 1 800 959 4464. MODELS (EX)637A06 & (EX)638A06. CRYOGENIC ICP ® ACCELEROMETERS Specialized cryogenic circuitry & quartz sensing technology to promote survivability in

Model 601A01:Platinum Stock Products; Low-noise, industrial, ceramic shear ICP® accel, 100 mV/g, 0.27 to 10k Hz, top exit, 2-pin conn., single point I

Our specialist hermetic connectors, glass to metal seals and feedthroughs are designed and manufactured to meet the most stringent requirements for all military applications.. Our product offering ranges from standard catalogue Mil Spec connectors, through modified standard Mil Spec connectors, to fully bespoke solutions for customer specific applications.

Model M603M170:General purpose industrial ceramic shear ICP accel, 100 mV/g 0.4 to 14kHz top exit, 2-pin conn, single point ISO 17025 accredited calibratio

The MGT-5015 line of high-power Amphenol connectors is an expansion of the GT-5015 series, offering a ruggedized environment connector in a variety of military and commercial finishes such as Durmalon and black zinc nickel.

Model FY:3-socket environmental boot connector with locking ring (MIL-C-5015 compatible)

Model Number 603C01 PLATINUM LOW-COST INDUSTRIAL ICP ® ACCELEROMETER Revision H ECN #: 25657 Performance ENGLISH SI Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [2] Measurement Range ±50 g ±490 m/s2 Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [3]

Model 393B31 Seismic, high sensitivity, ceramic flexural ICP® accel., 10 V/g, 0.1 to 200 Hz, 2-pin top conn. Installation and Operating Manual

Model 623C00:High-freq., industrial, ceramic shear ICP® accel, 10 mV/g, 0.8 to 15k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited cal

Model R6W-0-J9F-64 Accelerometer cable assembly: 64 ft J9F cable, 2-conductor twisted pair, foil shield with drain wire, red Teflon® jacket, model 6W molded MIL-C-5015 2-socket connector, IP67, rated to 125°C, electrical isolation between shield and transducer housing, to blunt cut Wilcoxon's redesigned R6Ws are 2-socket, MIL-C-5015 style connectors with an isolated shield and an IP67 […]

This series, similar to the H4 with UL 6703 / IEC 62852 approvals at 1500V DC, enhanced materials to increase performance levels of chemical resistance, ingress protection (IP68 24h/1 m mated), damp heat (2000 hrs), thermal cycle (800 cycles), humidity freeze (60) cycles, and lower contact resistance.