Search Results for 62 in -16pg9-10-7s-4-624

Connector sizes of 104, 200 and 296 signals providing 62 signal contacts per linear cm (158 signal contacts per linear inch) Allow for optimization of board space and signal requirements; 100Ω differential pair matched the impedance; Assures consistent highspeed performance; Dual beam signal contacts provide two points of contact

Thermo-Trex® Thermocouple Extension Wire is used to carry the signal from the thermocouple sensor to the monitoring device. It is available in types JX, KX, and RSX with heat resistance ranging from 90°C to 530°C and in chemically resistant and extreme heat resistant jackets.

RF Connector BNC Straight Crimp Plug RG-59 RG-62 50 Ohm. Body Finish: Nickel: Body Material: Brass: Cable Type (Terminates to) RG-59, RG-62, Belden 8221, Belden 8241, Belden 9169, Belden 9204, Belden 9228, Canare LV-61S

Influence of Axial Vibration(0.1g (1 m/s²)) 62 dB re 20 µPa 62 dB re 20 µPa [5] Electrical Polarization Voltage 0 V 0 V [1] Excitation Voltage 20 to 32 VDC 20 to 32 VDC Constant Current Excitation 2 to 20 mA 2 to 20 mA Output Bias Voltage 10 to 14 VDC 10 to 14 VDC Maximum Output Voltage +/-8 Vpk +/-8 Vpk Output Impedance <50 Ohm <50 Ohm Physical

AFSI’s line of 109 series hermaphroditic connectors offers the ultimate in flexibility and is a direct replacement for the TAC4. The 109 connector line meets or exceeds the pertinent requirements of SMPTE standard 358M on harsh environment multi-channel fiber optic connectors suitable for deployment in demanding outdoor broadcast applications, including HDTV signal transmission.

Azimuth Beamwidth degrees 63.5° ± 3.9° 62.9° ± 3.5° 60.9° ± 4.2° Elevation Beamwidth degrees 6.0° ± 0.2° 5.6° ± 0.4° 5.1° ± 0.5° Electrical Downtilt degrees 0°-10° Impedance Ohms 50 VSWR --- < 1.5 Passive Intermodulation 3rd Order for 2 x 20W Carriers dBm < -110 Front-to-Back Ratio, Total Power, ±30° dB > 26.9 > 25.1 > 25.2

M4094 800W 3U VPX DC to DC Power Supply, VITA 62 Compliant, SOSA™ aligned, It converts power from the MIL-STD-704 270Vdc bus to deliver the 12Vdc and 3.3VAUX supplies required by SOSA-aligned sys-tems. Up to 800W output power and EMI filters included. Using the new VITA 62.2 connector system, the

mountng thread see drawing 5-40 a m3 x 0.50 b 10-32 c m5 x 0.80 d 1/4-28 e m6 x 1.00 f bolt thread see drawing 10-32 c m5 x 0.80 d 1/4-28 e m6 x 1.00 f m8 x 1.25 f

Model 353B51 High sensitivity, quartz shear ICP® accel., 500 mV/g, 1 to 2k Hz, 10-32 side conn. Installation and Operating Manual For assistance with the operation of this product,

Model M354C03 Triaxial, thru-hole mtg, ceramic shear ICP® accel., 100 mV/g, 0.5 to 2k Hz, ground isolated, 4-pin conn., supplied with insulated M5 x 0.80 cap screw

ELECTRICAL SPECIFICATIONS R1 R2 Frequency Range MHz 694-960 MHz 694-806 790-894 880-960 Polarization --- ±45° Gain Over all Tilts dBi 15.1 ± 0.8 15.4 ± 0.4 15.6 ± 0.5

ABS Coaxial Cable Product Type: T6TSFx77- Orange Document: t6tsfx77-fe orange_1.8ghz18.docx Revision: 12.12.2018 Page: 2 of 2

- nrn 45337 11/20 stw approved: checked: drawn: stw 11/13/20 stw 11/13/20 sj 11/13/20 rohs compliant.40010.16.0651.65.1433.62.002±.0010.05±0.03.2105.33

Mechanical Specifications Electrical Specifications Ambient Temperature Range At Storage: -25 to +155°C At Maximum Voltage: +10 to +55°C Construction Bare ceramic disc Thick silver film electrodes

Title: C:\Users\jhead\Desktop\ATM 2pos J1939 connector\C-ATM06-2S-R120XXX-A2.dwg Author: JHead Created Date: 7/16/2019 4:25:30 PM

Drill Ø.199[Ø5.05] ↓.300[7.62] MIN Tap M6 X 1-6g ↓.200[5.08] MIN REQUIRED TOOLS Pilot hole and spot-facing tool, Thread tap (not pictured) INSTRUCTIONS, PAGE 1 OF 2 SM102 or SM103 sensor and integral English or metric mounting stud Surface facing preparation:

0.62 in: 1.57 cm: Tip Diameter: 0.25 in: 0.63 cm: Hammer Length: 8.5 in: 21.6 cm: Electrical Connection Position: Bottom of Handle: Bottom of Handle: Extender Mass Weight: 0.9 oz: 25 gm: Electrical Connector: BNC Jack: BNC Jack * All specifications are at room temperature unless otherwise specified. Accessories.

Diameter of mounting surface 1.62 in. (4.1 cm) Mounting stud, stainless steel 3/8-16 UNC Recommended screw down torque 70 lb/in (7.9 N/m) Temperature range 0° to +80°C Base material anodized aluminum Weight: Parts rigidly attached to structure Suspended weight Total weight 2.0 lb (0.9 kg) 4.8 lb (2.2 kg) 6.8 lb (3.1 kg) See reverse for ...

62.9 n21.2 1 8. 4 n 9 0 n small cable clamp large cable clamp notes: 1. both cable clamps large & small are packed in the same bag of connector kit 2 1 3 5 4. title: 55010849-000 author: thien created date:

Type of fiber : 50/125, 62,5/125 Patchcord length : ex. 10.5m Patchcord Configuration : plug/plug, plug/pigtail, plug/receptacle receptacle/pigtail, receptacle/receptacle Drawing : please send us a drawing of your request RNJOP patchcord. Title: EWOC-debords.qxd (Page 1) Author: Ehubbard