Search Results for 62 in -16pg9-10-7s-4-624
TULC Combination Sensor
Output set to 0xFB (62.75 scaled). No echo conditions occur when the sensor is dry (empty tank), covered with debris, or frozen. PGN 18FD9BA3H Name Concentration Failure Mode Indicator Units Enumerated Scale Factor 1 Offset 0 Start Bit 32 Bit Length 8 Minimum 0 Maximum 255 Values 3 = OBD Sensing Element Failed Open. 11 = OBD Internal Failure.
EWOC-debords.qxd (Page 1) - Amphenol Fiber Systems International (AFSI)
Type of fiber : 50/125, 62,5/125 Patchcord length : ex. 10.5m Patchcord Configuration : plug/plug, plug/pigtail, plug/receptacle receptacle/pigtail, receptacle/receptacle Drawing : please send us a drawing of your request RNJOP patchcord. Title: EWOC-debords.qxd (Page 1) Author: Ehubbard
Model 320C03 ESS general purpose, quartz shear ICP® accel., 10 ... - PCB
x 7.62 [.300] min. m6 x 0.75-6h x 5.08[.200] min. m6 x 1.0 mounting hole preparation: 5.05[ .199] x 8.10 [.320] min. m6x 1.0-6h x 6.35[.250] min. "b" "c" "g" mounting instructions for special thread lengths (metric dimensions in brackets) thread depth : b= x + 1 thread pitch drill depth : c= b + 3 thread pitch see a-f for appropriate drill and tap
Model 354C02 Triaxial, thru-hole mtg, ceramic shear ICP® accel ... - PCB
x 7.62 [.300] min. m6 x 0.75-6h x 5.08[.200] min. m6 x 1.0 mounting hole preparation: 5.05[ .199] x 8.10 [.320] min. m6x 1.0-6h x 6.35[.250] min. "b" "c" "g" mounting instructions for special thread lengths (metric dimensions in brackets) thread depth : b= x + 1 thread pitch drill depth : c= b + 3 thread pitch see a-f for appropriate drill and tap
General purpose accelerometers
Weight 62 grams Case material 316L stainless steel Mounting 1/4-28 UNF tapped hole Output connector 2 pin, MIL-C-5015 style Mating connector R6 type Recommended cabling J10 / J9T2A Connections Function Connector pin power/signal A common B ground shell 99014 Rev.D.1 09/18
ALUMALIGHT BACKSHELLS
08 20.62 25.40 21.60 47.80 25.40 09 23.80 28.58 25.30 63.50 28.58 10 26.97 31.75 31.00 68.10 31.75 TABLE-B Finish Code Material & Finish W Aluminum Alloy. Cadmium Olive Drab N Aluminum Alloy/ Electroleess Nickel +_ ZN Aluminum Alloy/ Black Zinc Nickel N Aluminum Alloy/Z Black Zinc Nickel
UNLESS OTHERWISE SPECIFIED Amphenol THIRD ANGLE PROJECTION
62.9 n21.2 1 8. 4 n 9 0 n small cable clamp large cable clamp notes: 1. both cable clamps large & small are packed in the same bag of connector kit 2 1 3 5 4. title: 55010849-000 author: thien created date:
1710-2690 MHz
Horizontal Beamwidth 68° 62° Vertical Beamwidth 12° 10° Gain 15.5 dBi 16.0 dBi Impedance 50Ω VSWR ≤ 1.5:1 Front-to-Back Ratio > 25 dB Isolation > 25 dB IM3 (2x20W) < -150 dBc Input Power 250 W Total Number of Connectors Antenna has 2 connectors located at the bottom Connectors Per Band, Type, Location
IDS-22-4 Amphenol
aio-csjm90 m90 2.07 0 62 – 70 20 57 aio-csjm80 m80 2.06 0 52 – 60 20 57 aio-csjm72 m72 2.05 2 46 – 52 16 47 aio-csjm63 m63 1.54 4 37 – 44 12 43 aio-csjm50 m50 1.53 8 32 – 38 11 39 aio-csjm40 m40 1.53 2 22 – 32 10 39 aio-csjm36 m36 2.02 5 18 – 25 10 34
L77HDCH62SOL2RM8 | D-Subminiature | Amphenol
Dsub, Stamped Signal 3A, High Density, Straight PCB Thru Hole, 62 Socket, Flash Gold, 4-40 Fixed Front Screwlock, Standoff 6.0mm (0.236
APPLICATION SPECIFICATION GS-20-141 - Amphenol CS
1.35 [.053] Min 1.40~1.75 [.055~.069] 2.11~2.62 [.083~.103] 2.92~3.43[.115~.135] Figure 3 6.5.2 Hole Dimensions and Durability The contact holes must be drilled and plated through to specific dimensions to prevent stubbing during placement of the connector on the pc board and to ensure optimum continuity for circuits after soldering.
25-Pin D-Sub Cable (DB25) Cables for Sale | Cables on Demand
25-Pin D-Sub Cables (DB25) -- 25-Pin D-Sub cable assemblies by Amphenol provide the perfect I/O solution for your DB25 d-sub equipped devices. All of our 25-pin d sub cables come fully populated with 24K Gold plated contacts, molded DB25 connectors, and offer varying degrees of shielding depending upon your specific requirements.
Model 301A10 Calibration ICP® accel., 100 mV/g, 50g, 0.5 to 10 ... - PCB
x 7.62 [.300] min. m6 x 0.75-6h x 5.08[.200] min. m6 x 1.0 mounting hole preparation: 5.05[ .199] x 8.10 [.320] min. m6x 1.0-6h x 6.35[.250] min. "b" "c" "g" mounting instructions for special thread lengths (metric dimensions in brackets) thread depth : b= x + 1 thread pitch drill depth : c= b + 3 thread pitch see a-f for appropriate drill and tap
TEMPOSONICS LP
7.62 mm (0.300 in.) Aluminum Plate (bonded to magnet, both sides) 8.64 mm (0.34 in.) Tolerance: ± 2mm (0.079 in.) 20.32 mm (0.800 in.) Extrusion for Profile-style Housings 3.1 mm (0.122 in.) Tolerance: ± 2mm (0.079 in.) Magnet Mounting Screw (1 of 2) 8-32 x 3/4 in. PPH stainless steel Part No. 560712 Hanging Connector (style H and J)
BPF 3/...-200-SHT
High power base station shortened band-pass filter for the 116 - 146 MHz range. Due to the use of large ø200 mm cavities a high Q is achieved, resulting in a very narrow passband.
VPX DC/DC POWER SUPPLY
Each VSx output has its own Sense Lines, additional common Sense RTN Line is provided for all VSx Outputs (VITA 62 Standard). Contact Factory for Sense configuration different than the VITA 62 standard Figure 4: PSVD3USU48P800-X Sense line connection . www.amphenol-socapex.com
6880300G 6880300N 6880300NG 3-Band, 6-Port, 65°, XPOL, Panel Antenna ...
ARRAY LAYOUT ARRAY FREQUENCY CONNECTOR CONNECTOR TYPE R1 698-960 1-2 7/16-DIN Female Long Neck or 4.3-10 Female Y1 1695-2690 3-4 7/16-DIN Female Ultra Long Neck
Model J352C33 High sensitivity, ceramic shear ICP® accel., 100 ... - PCB
x 7.62 [.300] min. m6 x 0.75-6h x 5.08[.200] min. m6 x 1.0 mounting hole preparation: 5.05[ .199] x 8.10 [.320] min. m6x 1.0-6h x 6.35[.250] min. "b" "c" "g" mounting instructions for special thread lengths (metric dimensions in brackets) thread depth : b= x + 1 thread pitch drill depth : c= b + 3 thread pitch see a-f for appropriate drill and tap
Model 3741F122G | PCB Piezotronics
Model 3741F122G:Differential MEMS DC accelerometer, 1350 mV/g, 2 g, 10-ft integral cable, pigtail termination.