Search Results for 97-3057-1007-1-608
Board-Level Connectors | Products | Amphenol
Micro Board-to-Board 0.60mm Stack Height - 103 Series (0.35mm pitch) Amphenol's 103 series are 0.35mm pitch micro board-to-board connectors designed for high-density applications. They support an extreme low profile 0.60mm stack height and a high current rating up to 5A. These connectors are offered in 4 to 60 positions.
SENSOR SIGNAL CONDITIONER - PCB
Model Number 483C28 SENSOR SIGNAL CONDITIONER Revision: C ECN #: 45020 Performance ENGLISH SI Channels 8 8 Sensor Input Type(s) ICP®, Voltage, Bridge/Differential ICP®, Voltage,
10131936-104ULF | Minitek ® 2.00mm BTB | Amphenol
Amphenol is one of the leading manufacturers of Minitek ® 2.00mm. Contact us today for more details of Minitek ® , part number 10131936-104ULF.
MARPORT TE QUICK REFERENCE GUIDE
Place sensor (1) at the centre of the net’s headrope (2), facing the vessel. Installing Buoys (4) on either sides stabilize the sensor during trawling operations. Buoys ensure that down-looking transducer beam (5) is vertical for footrope (6) detection. ¹ ² ³ 4 Install a double mesh piece of netting (3) to stabilize the sensor.
Model 357C10/NC Miniature charge output accel, 1.7 pC/g, 500 g, to 10 ...
Miniature charge output accel, 1.7 pC/g, 500 g, to 10 kHz, 0.45 gm, 3-56 conn., no mating cable supplied Installation and Operating Manual For assistance with the operation of this product, contact the PCB Piezotronics, Inc. Toll-free: 716-684-0001 24-hour SensorLine: 716-684-0001 Fax: 716-684-0987
M195 30/200kHz EchoRange+ D/T Portable Survey - 3m Cable
30 and 200 kHz frequency. Embedded transceivers. Digital signal processing. NMEA 0183* data-output protocol. Echo-envelope time-series data output via RS-485. Sealcast ™, seamless, urethane housing for long life underwater. M195 housing design offers flexibility mounting. Portable mount: installation on poles for hydrographic survey.
SERIES 260 & 261 3-COMPONENT DYNAMIC FORCE - PCB
EASUREMENTS IN THREE ORTHOGONAL DIRECTIONSThree-component dynamic force sensors are offered in both ICP® and charge output configurations for dynamic and q. asi-static force measurement applications. Each utilizes an array of. recision-aligned, quartz sensing crystals. Measurements along the z-axis are proportional to appl.
High Power Connectors | Power Products - Amphenol Aerospace
+1 (607) 563-5161 [email protected] Description: Amphenol Commercial Class L heavy duty power connectors are the commercial equivalent of the MIL-DTL-22992 qualified connectors -- our largest size cylindrical connector. These ruggedized high amp connectors are available only in the specific configurations defined by the MIL-DTL-22992 ...
L17SM209S814T | D-Sub | Amphenol
Dsub, Right Angle Standard Density SMT, 9 Socket, Bright Tin Shell, 0.76μm (30μin) Gold, Without Grounding Tab&Boardlock, M3 Front Screwlock, Tube 19pcs.
2.2-5 Panel Mount Jack 4-Hole Flange RG-405 0.086-inch Conformable 50 ...
1 (Single Port) Size Category: Miniature: Temp (Max Degrees Celsius) 165: Temp (Min Degrees Celsius)-65: Termination Style: Cable - Solder: Thread Direction: Standard: Products Related To Your Application. 2.2-5 Straight Solder Jack RG-405 0.086-inch Conformable 50 Ohm 225-105J-52S.
Quality System Certifications | PCB Piezotronics
Assurance of quality system conformity is provided by certifying bodies and through our internal auditing system. In addition, our system remains compliant with obsolete or superseded standards such as: ISO 10012-1 (former MIL-STD-45662A), Guide 25, MIL-Q-9858 and MIL-I-45208. PCB is also compliant to nuclear power plant specification 10CFR50 ...
UNLESS OTHERWISE SPECIFIED Amphenol THIRD ANGLE PROJECTION
28.9 [1.137] Title: 55011397-000.idw Author: thien Created Date: 3/5/2020 11:42:17 AM ...
MFK0252BW-002-TL30G-50 | Amphenol Global Search | Amphenol
6. interface dimensions meet din 72594-1 and uscar-18. recommended pcb layout. * adjustable for rf performance. section a-a scale 6.000. customer outline drawing. all other sheets are for internal use only. configuration control: no changes permitted to drawing without ppap qualified customer approval.
20021121-00010D4LF | Minitek127® | Amphenol
Amphenol is one of the leading manufacturers of Minitek127® 1.27MM. Contact us today for more details of Minitek127®, part number 20021121-00010D4LF.
SMP Female QB Connector for .085 Cable - SV Microwave
These products contain one or more EU REACH Substances of Very High Concern (SVHC) > 0.1% by weight (1000 ppm). Details related to the SVHC are displayed. REACH SVHC: LEAD, CAS #: 7439-92-1, PPM: 4000 . Use personal protective equipment as required. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.
Model W138A06/ | PCB Piezotronics (en)
3425 Walden Avenue Depew, NY 14043. Sensorline SM 716.684.0001. [email protected] +1 800-828-8840
10127716-12LF | Minitek ® Pwr 3.0 | Amphenol
1. Amphenol is one of the leading manufacturers of 3.00mm Wire to Board Signal. Contact us today for more details of Minitek® Pwr 3.0, part number 10127716-12LF.
Type N Male Dust Cap, Wire Rope M39012/25-0111 | SV Microwave
These products contain one or more EU REACH Substances of Very High Concern (SVHC) > 0.1% by weight (1000 ppm). Details related to the SVHC are displayed. REACH SVHC: LEAD, CAS #: 7439-92-1, PPM: 30000 . Use personal protective equipment as required. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.
Digital Video Interface - Amphenol Aerospace
1.400 ain eyway p1 connector satec hqdp-020 edge vertical ount style w/ qth-020-01-h-d-dp-e2 connector 100 oh differential 30awg icro twina ribbon cable see detail a 4-40 screw p2 connector d38999 receptacle interface 19-abp arrangeent ey rotation n see detail b front iso view scale 1.500 rear iso view scale 1.500 front iso view scale 1.500 ...
Sound and Noise Measurement | PCB Piezotronics
Product Noise & Vibration Testing. The Model 831 or SoundExpert LxT sound level meters provide the functions, metrics, and accessories needed to help you develop quieter products. These instruments are well suited for acoustic development in the automotive, motorcycle, appliance, turbine, and speaker industries. Learn more ».
Model 603C01 | PCB Piezotronics
Model 603C01. Lead Time for 1-5 is 0 Dys. Lead Time for 6-15 is 5 Dys. Lead Time for 16-25 is 15 Dys. Lead Time for 16-25 is 15 Dys. Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin conn., single point ISO 17025 accredited calibration. The 603C01 ICP ® is one model in a ...
BNC UltraFlex Low Loss Cable Assemblies Offer Additional Design ...
BNC cable assemblies are engineered using high-quality connectors which feature the familiar bayonet coupling mechanism for easy mating and un-mating. These connectors are manufactured from machined brass and diecast zinc with nickel plating and offer reliable electrical performance up to 3 GHz. LMR low loss cable is designed with improved ...
RJE451882101 | Modular Jacks | Amphenol
Amphenol is one of the leading manufacturers of Modular Jacks. Contact us today for more details about part number RJE451882101.
Fiber Optic Terminus End Face Quality Standards
Fiber optic terminations are sensitive not only to the physical end face geometries but also to dust, dirt, debris and scratches across the fiber and areas on the ferrule close to the fiber. Published standards guide producers and users regarding the finish quality of the terminus. Tables 4 and 5 below show the acceptance criteria of IPC 8497 ...
Endevco Introduces Model 2262B Damped Piezoresistive Accelerometer for ...
Endevco Introduces Model 2262B Damped Piezoresistive Accelerometer for Shock Environments. August 23, 2021, Depew, NY – Endevco today announced the release of Model 2262B, a rugged, gas damped piezoresistive accelerometer for shock environments. This new transducer uses a unique and advanced multi-mode damped silicon piezoresistive MEMS sensing element for exceptional bandwidth with no ...
General Purpose Low Profile | PCB Piezotronics
General Purpose Low Profile. Our low profile load cells feature an advanced structural design that makes them extremely durable, accurate, and resistant to large extraneous shear and moment loads. To perform in a linear and predictable manner, the outside diameter of the load cell must be bolted to a flat rigid surface.
10017660-001LF | SATA | Amphenol
The information below is for reference only. For more technical details, refer to product specification and application specification. Amphenol is one of the leading manufacturers of Storage and Server System. Contact us today for more details of SATA Connectors, part number 10017660-001LF.
Model 687A01 | PCB Piezotronics
1: 080A131: Curved surface magnet, 1.0" diameter, 35 lbf, 1/4-28 threaded hole w/mounting stud: 1: 603C01: Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin conn., single point ISO 17025 accredited calibration: 1: 687A02
Intrinsically safe 4-20 mA loop powered sensors
Mounting 1/4-28 tapped hole Output connector 2 pin, MIL-C-5015 style Mating connector R6 type Recommended cabling J9T2A Connections Function Connector pin A loop negative (–) B ground shell Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 [email protected] buy.wilcoxon.com www.wilcoxon.com Notes: 1 Maximum loop resistance (R L) can be calculated ...
N-Type Straight Crimp Jack RG-174 RG-188 RG-316 Times LMR-100A Bulkhead ...
1 (Single Port) Size Category: Standard: Temp (Max Degrees Celsius) 165: Temp (Min Degrees Celsius)-65: Termination Style: Cable - Crimp: Thread Direction: Standard: Products Related To Your Application. FAKRA GEN 3 Straight Crimp Jack RG-174 RG-188 RG-316 Times LMR-100A 50 Ohm Low Profile IP67 Z Key Code 3FA1ENZSJ-C01ES.
M29504/4 & /5 Fiber Optic Termini - Amphenol-Air LB
the HD20 allows the connector to maintain fiber optic ical hybrid termini, lites. Amphenol Fiber Systems Phone: International, 214.547.2400 Inc.1300 - 800.472.4225 Central Expressway - Fax:214.547.9344 North, Suite 100,Allen, TX 75013. Fiber Optic Solutions www.fibersystems.com.
G97R22312HR | Overpass - Mini Cool Edge IO | Amphenol
Amphenol is one of the leading manufacturers of High speed IO Connectors. Contact us today for more details of MINI COOL EDGE IO ,part number G97R22312HR
Type C SWIFT LA Snap-In - アンフェノールジャパン株式会社
End 1 Type C (3.2 Gen 1): Female Connector Female Contact. End 2 Non-Waterproof Type C: Male Connector Male Contact. STRAIGHT-TO-STRAIGHT, Overmolded Double-Ended Cable Assembly, IP67 (Mated) Cable Length: USB 3.2 Gen 2: (A05) 0.5M ~ (003) 3M. 43.85. End 1 Type C: Female Connector Female Contact. End 2 Type C: Female Connector Female Contact.
ATP13-4P-BM02BLK 4 Position 90° PCB Flange Mount Receptacle
Dielectric Value: Dielectric withstanding voltage less than 2 milliamps current leakage @ 1500 volts AC. Insulation Resistance: 1000 megohms min@ 25°C. RoHS Compliant: TRUE. Mating Cycle Durability: <100. Mating Part (s): ATP06-4S*. QUANTITY. REQUEST A QUOTE. Description. 4 Position 90° PCB Flange Mount Receptacle, Molded Gold Pins, Potted ...
Junction Modules/Relay Sockets/Terminal Blocks - Amphenol
This series is economical pluggable PCB terminal blocks, and with simple construction. They can connect conducting wires whose cross-sections are 0.08mm² to 3.3mm². The pitches are available at 3.5mm to 8.0mm.Product design in line with IEC60947-7-1, IEC60998-2-1, IEC60999-1, UL1059, CSA C22.2 No.158 and other international standards.
ECN #: AD CABLE CONNECTOR - PCB
3425 Walden Avenue Depew, NY 14043. UNITED STATES. Phone: 800-828-8840 Fax: 716-684-0987 E-mail: [email protected] Web site: www.pcb.com.
B B1 - Amphenol Sine
none 1 3 of: sh: rev: dwg no: title: rev description date revisions eco by appr b1 release 28jun2020 zenin tommy 6 35.8±0.5 43.8±0.8 12.2 key "a" ref 3.8 see sheet 2&3 for options 6 standard or reduced diameter seal 6 contact size and rear seal wire range notes: unless otherwise specified 1. material: housing: thermoplastic; color: see chart
Mini DisplayPort connection system for harsh environment
- Panel thickness : 1,6 mm min and 3,18 mm max for jam nut receptacle. Data Transmission : - Display 1.4 protocol. - Transmission bandwidth : 32.4 Gbit/s with 8.1 Gbit/s per lane. - Can support 8K UHD (7680×4320) at 60 Hz or 4K UHD (3840×2160) at 120 Hz. Environmental protection : - Sealed against fluids and dusts : IP68 mated.
BPF 70/33-TETRA-N-...
The BPF 70/33-TETRA-N-... are 6 resonator band-pass filters designed for TETRA. The filters use reduced-length ¼ λ cavities in a compact, strong aluminium housing. 19” drawers available as options. Built-in DC stop between all ports.
F-Type Straight Crimp Jack RG-179 Belden 179DT Bulkhead Rear Mount 75 ...
Temp (Min Degrees Celsius) -55. Termination Style. Cable - Crimp. Thread Direction. Standard. RF Connector F-Type Straight Crimp Jack RG-179 Belden 179DT Bulkhead Rear Mount 75 Ohm.
PRO-PHY150-8SI
The PRO-PHY series of hybrid combiners has been designed to help identify the optimum solution for combining several transmitters into one antenna. All hybrid combiners are suitable for 19” rack mounting. Single isolators fitted as standard. A range of racks and cabinets are available. Option: Maximum input power of 35 W (PRO-PHY…-8SI-35)
Industrial | Markets | Amphenol
In-line junctions 1119 series are available in 1 to 4 contacts versions, for copper cable contacts, and also exist in components carrier versions (diodes, resistors, or fuses inserted). These Amphenol Air LB France's splices are fully sealed, compact, thin, and easy to use. Perfectly suited in a cable harness, to easily insert a component and ...
A Custom Wire & Industrial Cable Supplier | TPC Wire
1/0 AWG 2/0 AWG 3/0 AWG HOFFMAN PRODUCTS, A TPC WIRE & CABLE CORP. BRAND 216-525-4320 800-645-2014 FAX 866-896-3017 Specifications subject to change. For complete specifications and availability, ask your Hoffman Products Sales Representative or call 800-645-2014. Created Date:
Environmental Affairs Policy
Page 1 of 1 Handelsregister: Amtsgericht Iserlohn HRA 3314 • Geschäftsführer: Dr.-Ing. Thomas Grahl, John Vincent Emholz MTS Sensor Technologie ist ein Unternehmen der MTS Systems Corporation, Minneapolis, USA Environmental Affairs Policy MTS Sensors as a developer, manufacturer and distributor of position, level and angle sensors, is
RJHSE538B02 | Modular Jacks | Amphenol
Amphenol is one of the leading manufacturers of Input Output Connectors. Contact us today for more details of Modular Jack Connector, part number RJHSE538B02.
Amphenol
Contact Size 16 Options (Works with: AT, ATV, AHD-9, ARC, DuraMate and PanelMate Series) Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10-2023. Machined Contacts, Sockets & Pins.
Fatal error - SGX Sensortech
Fatal error: Uncaught PDOException: SQLSTATE[42000]: Syntax error or access violation: 1064 You have an error in your SQL syntax; check the manual that corresponds to ...
10164228-0201A1RLF | BergStak ® 0.40mm | Amphenol
BergStak® 0.40mm, 20 position, Receptacle, 1.5mm stack height. Part Specification Detail. Part Specification Detail. The information below is for reference only. For more technical details, refer to product specification and application specification. 3D View. 3D View
Guidelines for Mounting Test Accelerometers | PCB Piezotronics
Figure 1: Approximate frequency ranges of mounting techniques . Screw Mounting. Use an insulated cap screw to securely mount a ring-style accelerometer. Insert the cap screw into a through-hole in the accelerometer housing and screw it into a tapped hole on the mounting surface (see Figure 3A). The tapped hole should be deep enough so that the ...
Model 607A01 | PCB Piezotronics
Model: M080A131. Curved surface magnet, 25 mm diameter, 6... Add to cart for a quote. Add to Quote. Model 607A01:Platinum Stock Products; Low profile industrial ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 2-pin MIL conn. & swiveler base, sing.