Search Results for 97-3102a-18-13
Model 682A02 | PCB Piezotronics
18 VDC excitation voltage, with internally jumper selectable excitation current and voltage gain. DC Power: (±10%)24 VDC ... selectable on internal circuit board. [3] Typical. [4] If unit is used in conjunction with a sensor having a bias over 13 VDC, full scale output may be affected or sensor may not power up. ... 0.97 in: 24.6 mm: Size ...
General purpose accelerometer - Wilcoxon Sensing Technologies
18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g: Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1,000 Hz 700 µg 10 µg/√Hz 5 µg/√Hz 5 µg/√Hz Output impedance, max 100 Ω Bias output voltage 12 VDC Grounding case isolated, internally shielded Temperature range –55° to +120°C
Temposonics
robustness.Each Temposonics® position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting. lectronics. The magnet, connected to the object in motion in the ap-plication, generates a magnetic fi eld at its location on th. waveguide. A short current pulse is applied to th.
E-Series ER Product Data Sheet, 550996 Rev E - Temposonics
The Temposonics E-Series Model ER Start/Stop output sensors require a start signal from a control-ler or interface module to initiate the measurement cycle. The sensor generates a stop signal at the end of the measurement cycle that is used to stop the controller’s counter clock. Start signal from controller or interface module.
A-A B-B - Amphenol Sine
4.1 current rating: 13 amps 4.2 contact millivolt drop: 100 millivolt drop @ 13 amp test current. 4.3 rohs compliant 5. recommended wire range: 20 - 22 awg (0.5 - 0.35mm²) recommended insul o.d: 1.31 - 1.50mm (0.051 - 0.059inch) 6. package: 4000 pcs/reel 7. all dimensions are for reference use only a b 2.6
67 and 165 Series Miniature Connectors - Amphenol Aerospace
Features & Benefits: 67 Series. Operating temperatures from -67 °F (-55 °C) to 257 °F (125 °C) per MIL-C-5015. Sealed connectors capable of 1500 VRMS at 70,000 ft. altitude. Vibration resistance of 10 to 2,000 cps at 20Gs. Moisture resistance exceeds MIL-C-5015 requirements with potting. Five shell styles.
Data Sheet R-Series V RFV Analog
imultaneously.R-Series V AnalogWith the R-Series V Analog you can confi gure the Analog output (current/voltage) that it fi ts best for your application and also adjust it o. sor assistant for the R-Series VThe TempoLink® smart assistant supports you in setup a. d diagnostics of the R-Series V. For more information of the assistant please see ...
REVISIONS - amphenol-sine.com
PIN, STAMPED, SIZE 16, 14-18 AWG, A SERIES 44724 Morley Drive Clinton Township, MI 48036 Sine Systems - www.amphenol-sine.com Amphenol MATERIALS LIST SIZE PROCESS SPECIFICATIONS: MATERIAL SPECIFICATIONS: ... 13 AMPS 4.2 CONTACT MILLIVOLT DROP: 100 MILLIVOLT DROP @ 13 AMP TEST CURRENT. 4.3 RoHS COMPLIANT 5. RECOMMENDED WIRE RANGE: 14 - 18 AWG (2 ...
Model 1381-02A rod end load cell Installation and Operating Manual - PCB
essTo perform the shunt calibration, e the following procedure:Sta. lize all forces on the load cell. If possible, remove. ll loads.Set the load indicator display to read exactly 00.000.Connect the shunt resistor to the terminals specified in the calibration certificate, and adjust the span or gain.
Model M604B31 | PCB Piezotronics
Model M604B31. Lead Time for 1-10 is 3 Wks. Platinum Stock Products; Triaxial ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 5k Hz, side exit, 4-pin conn., triaxial single point ISO 17025 accredited calibration.
B A5 - Amphenol Sine
18.9 34 2x Ø4 6 at1612-13pb-rdg 44724 morley drive clinton township, mi 48036 sine systems - www.amphenol-sine.com process specifications: material specifications: quantity ... release new drawing format 10/23/13 drp - 6 gasket end cap a4 - add panel cutouts view 11/20/15 jarry tommy recommended panel cutouts will accept plastic self thread ...
7/8 Air Dielectric Cable - RFS Technologies
18 (1.288) @ 2700-3000 MHz 15 (1.432) @ 3550-3700 MHz 13 (1.576) @ 3700-3900 MHz 11 (1.784) @ 3980-4200 MHz Temperature & Power Standard PRODUCT DATASHEET HCA78-50JPL 7/8" Air Dielectric Cable HCA78-50JPL REV : H REV DATE : 09 Apr 2024 www.rfstechnologies.com
Our Company Introducation - Amphenol Industrial Operations
With a dedicated team of over 900 skilled professionals and certifications including ISO9001 and IATF 16949, Amphenol Industrial Operations consistently meets the highest standards of quality and performance. Amphenol Industrial Operations proudly operates as a division of Amphenol Corporation, headquartered in Wallingford, Connecticut.
AT06-2S-LED2430, 2-Way, Plug, LED, 24V, Clear endcap, Black - Amphenol Sine
13. Plastic. SPECIFICATIONS: Contact Size: 16; Contact Pin/Socket: Socket; AWG: 14-20; Amperage: 13A; Mating Part(s): AT04-2S* Receptacle; ... MFX-3950 - Size 16 Crimp Die for Stamped and Formed Contacts 18-20 AWG. REQUEST A QUOTE. MFX-3953 - Size 16 Crimp Die for Stamped and Formed Contacts 16-18 AWG.
B A4 - amphenol-sine.com
SeriesTM. Contact Size 16 Options (Works with: AT, ATV, AHD-9, ARC, DuraMate and PanelMate Series) Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10-2023. Machined Contacts, Sockets & Pins.
Model EXTO603C01 | PCB Piezotronics
The 603C01 ICP ® is one model in a very diverse line of 603-Series accelerometers. The 603-Series includes alternative sensitivity models, hazardous area approved models, dual output models and models with an integral cable. Sensitivity: (±10%)100 mV/g (10.2 mV/ (m/s²)) Frequency Range: (±3dB)30 to 600000 cpm (0.5 to 10000 Hz)
D38999 Series III Hermetic Connectors - Amphenol Aerospace
Features & Benefits: Hermetic- air leakage tested to 1x10-7 cc/sec helium. EMI Shielding: Solid metal-to-metal coupling, grounding fingers, electroless nickel plating, and thicker wall sections provide superior EMI shielding capability of 65dB minimum at 10 GHz. Contact Protection: Recessed pins in this 100% scoop-proof connector minimize ...
ILLUSTRATION: COMPLETE KIT - Amphenol Sine
13/16-20 UNEF THREAD ASSEMBLED VIEW 01 - RELEASE NEW DWG FORMAT - - MATERIALS LIST SIZE PROCESS SPECIFICATIONS: MATERIAL SPECIFICATIONS: UNLESS OTHERWISE SPECIFIED 3 PL DEC ±0.08 1) All dimensions are in metric(mm). 2) Tolerances are as follows: ... MP16M23F MS16M23F 18-16AWG 0.75-1.5mm² Gold Flash