Search Results for application form

Features. Fully compatible with IEEE802.3ba and Infiniband QDR & FDR specifications; 100 ohm differential impedance system; Allows for 10Gb/s & 14Gb/s per channel transmission; aggregate of 120 Gb/s & 168 Gb/s total bandwidth

Amphenol's SFP+ cable assembly is designed to meet data center, networking, and high-performance computing application needs for a high-density cabling interconnect system capable of 10 Gb/s per channel transmission rates. It is designed to meet the requirements of Small Form Factor industry-standard SFF-8431.

Amphenol's CFP2 series offers a 104 position, 0.6mm pitch connector designed to be compatible with 100Gb/s Form Factor Pluggable (CFP) Multi-Source Agreement for Ethernet and other applications. Rated for 25Gb/s per channel with resonance dampening for improved signal integrity, CFP2 has up to 60% lower power consumption versus CFP.

Power to operate ICP sensors is generally in the form of a low cost, 2427 VDC, 2- -20 mA constant current supply. Figure 1 schematically illustrates a typical ICP sensor system. PCB offers a number of AC or battery-powered, single or multi-channel power/signal conditioners, with or without gain capabilities for use with force sensors.

Mini Cool Edge connector specification is defined in SNIA SFF TA1002 while EDSFF and OCP committees adopt it for SSD application and NIC 3.0 application. Gen Z interconnect solutions should come in 1C, 2C, 4C and 4C+ pin configuration, and vertical, right angle, straddle mount and orthogonal orientation.

Custom Terminal Blocks. Complete Design Services - Tell us your requirements and EBY can design the efficient, economical component you need.. Manufacturing For You - With EBY's manufacturing network, we can offer quantities and delivery times at very competitive prices.. With CAD/CAE, Solid Modeling and Rapid Prototype Techniques, our engineers can bring your concepts to life in as little as ...

continuous mating and unmating is done with ease, no matter the location or application. Wire Gauge Range 18 - 24AWG Current Rating 5A Operating Temperature -55°C to +125°C Insulation Resistance 5000 MΩ min. Durability Min. 5000 matings Vibration 5-50Hz, 0,5 dA; 8 hrs axis Connector Body and Strain Relief Glass-filled thermoplast UL94-V0

cost-effective link for their respective application. FEATURES & BENEFITS • Ruggedized 26-position cabling interconnect system is SFF-8088 (shielded–external) and SFF-8086 compatible • Available options support Mini SAS (SAS 2.0 & 2.1) and Mini SATA 4x external I/O requirements • Cable assembly paddle card design is optimized for signal

With designs supporting pitches down to 0.4mm and speeds up to 40GHz, the SK series sockets are being used in cutting-edge BGA, LGA, and other small form factor IC applications. These sockets offer cycle lives of thousands of mating cycles. The electrical reliability & performance of our sockets can meet the most demanding application needs.

Amphenol CFP8 interconnect system has 124 contacts per port, with a 0.5mm contact pitch and 16 high speed channels. It is rated for 28Gb/s per channel with resonance dampening for improved signal integrity. It is comprised of insert molding assemblies for

Power to operate ICP sensors is generally in the form of a low cost, 2427 VDC, 2- -20 mA constant current supply. Figure 1 schematically illustrates a typical ICP sensor system. PCB offers a number of AC or battery-powered, single or multi-channel power/signal conditioners, with or without gain capabilities for use with force sensors.

Use the links to curve around obstacles, guide fiber cable into tight spots or direct cable runs to equipment -- however you need to route cable to fit your application. Cablelinks are a flexible, snap-together solution for the pathway from overhead fiber raceways to network equipment on the floor.

Our DC-DC power converters feature wide range of output power from 50W up to 2000W. Output voltage range comes in standard ranges including 5V, 12V, 15V, 24V, 28V, 48V.

Temposonics® R-Series EtherNet/IP TM Operation Manual I 5 I 3.2 Order structure of R-Series RH */ Non Standard stroke lengths are available; must be encoded in 5 mm / 0.1 in. increments 4/ Note: Please specify magnet numbers for your sensing application and order separately Temposonics® order code a Sensor model R H Rod b Design M Flange M18×1.5 (Standard) V Flange M18×1.5 with ...

3dB location. The form of this rule is somewhat of a surprise! The lower limit τf-3dB = 0.35 can be derived exactly from the mathematics associated with a low-pass first order filter with a time constant of 1/(2πf-3dB). Such a system has a high frequency roll-off of 6dB/octave, i.e., the slowest possible. However, the

Form E-3334 Rev F GS-01-001 4.6 FCI Lab Reports - Supporting Data ZA5-2625 Lead Free Plating investigation 5.0 Requirements 5.1 Qualification ... b. Sample documentation (Define application and provide drawings) c. Sample test conditions . NUMBER BUS-12-009 TYPE PRODUCT SPECIFICATION TITLE PAGE REVISION AUTHORIZED BY DATE

lithium ions available for reaction and so can cause an irreversible reduction of cell capacity. The plating of the lithium c an also form spikey, needle- like crystals, called dendrites, that can grow large enough to reach the cathode and short out the cell, potentially causing a fir e. Excessive current also causes

PCTEL’s rugged, high power 802.11ac WiFi radio module can be installed in a wide variety of products that accept standard mini-PCIe cards. Purpose-built to support industrial applications, this module’s small form factor makes it ideal for integration into your wireless IT platforms. Model Numbers: RM-WIFI-AC-2X2-HP-US; RM-WIFI-AC-2X2-HP-EU

available in two additional forms. The 8120-410A is similar to the 8120-400A except it also contains a dedicated 4.5 digit LED display with a 3Hz update rate. The resolution of the digital display is 1:5000 (0.02% FS). The display also has a selectable decimal point, trick count multiplier, and a trailing inert zero. For more

Custom Terminal Blocks. Complete Design Services - Tell us your requirements and EBY can design the efficient, economical component you need.. Manufacturing For You - With EBY's manufacturing network, we can offer quantities and delivery times at very competitive prices.. With CAD/CAE, Solid Modeling and Rapid Prototype Techniques, our engineers can bring your concepts to life in as little as ...