Search Results for axr-5
IDC Connector | Wire to Board | Flat Cable Connectors | Ribbon Connectors
IDC connectors are small electronic components that help connect wires to circuit boards. They are commonly used in computers and other electronic devices to ensure fast and reliable connections between different components.
lpt-series-connector-catalog-amphenol-industrial
5. Personnel inserting contacts will normally feel the contact reach its fully seated position 4. Insert at least 2 cables to fix the position for the remainder of the contacts 6.Push the grommet so it rests against the insulator face on the rear of the shell 7. Continue to seat the remainder of the contacts 8. Re-check to make sure the
www.amphenolrf.com
Created Date: 5/16/2001 3:05:46 PM
Model M629A31 Precision Triaxial Industrial ICP® Accelerometer ...
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model M603C91 Industrial ICP® Accelerometer Installation and ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 649A04 Programmable Loop Powered, Current Output ... - PCB
Torque (ft-lb) 2 to 5 2 to 5 Step 1: First, prepare a smooth, flat mounting surface and then drill and tap a mounting hole in the center of this area. A precision-machined mounting surface with a minimum finish of 63 µin (0.0016 mm) is recommended. (If it is not possible to properly prepare the machine surface, consider using an adhesive
Model 137B25 ICP® Pressure Sensor Installation and Operating Manual - PCB
5.0 CALIBRATION Do not try to calibrate the Series 137B2XX statically. The Series 137B2XX is calibrated dynamically by PCB using a hydraulic pulse technique. For best accuracy, use the calibration certificate supplied. Factory recalibration is available for a nominal charge. 6.0 MAINTENANCE
Product Change Notification - Amphenol PCD
purchased catalogue items in the last 5-years, to provide advance notice of changes being made to our proprietary catalogue product. Due to a worldwide shortage of certain silicon compound materials, certain blends of brown fluorosilicone are currently not available from our supplier. At this stage it is unclear if the
Model M627A01 Platinum Low-cost Quartz Accelerometer Installation ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 137B21B ICP® Pressure Sensor Installation and Operating Manual - PCB
5.0 CALIBRATION Do not try to calibrate the Series 137B2XX statically. The Series 137B2XX is calibrated dynamically by PCB using a hydraulic pulse technique. For best accuracy, use the calibration certificate supplied. Factory recalibration is available for a nominal charge. 6.0 MAINTENANCE
TITLE: DWG NO - Amphenol Sine
2.5 2x keyway key a shown 5. part number arc16-24sx-p013 variants arc16-24sa-p013 of: sh: rev: dwg no: title: rev description date revisions eco by appr 2 2 a1 arc16-24sx-p013 24 pos, plug, socket,arc series,keyed, normal seal,black arc16-24sx-p013 materials list size process specifications:
Model M101A05 General purpose ICP® pressure sensor, 100 psi, 50 mV/psi ...
Model M101A05 General purpose ICP® pressure sensor, 100 psi, 50 mV/psi, M10x1.0 mtg thd, ground isolated Installation and Operating Manual For assistance with the operation of this product,
Model 039230-50002/B Rotary Torque Angle Transducer, w/Auto-ID, 32 ozf ...
Power Required … 5 VDC @ 120 mA max. Recommended Max RPM ¼-in Drive … 5000 3/8-in Drive … 2500 ½-inch Drive … 2500 ¾-in Drive … 2000 1-in Drive … 1000 1 ½-in Drive … 750 2 ½-in Drive … 500 . RS Technologies Division of PCB Load & Torque, Inc. Toll-Free in USA 888-684-2894 716-684-0001 www.pcbloadtorque.com ...
Model 672A01 EchoPlus® Installation and Operating Manual
2.5” hex bolts, eight (8) flat washers, four (4) lock washers, and four (4) 5/16” x 18 hex nuts in conjunction with the nylon spacers as shown in References 1, 3, and 4 below. 6 Powering the Box The Junction Box can be powered by either 24 VDC that is readily available in many ...
Model M102A07 High resolution ICP® pressure sensor, 50 psi, 100 ... - PCB
The output bias voltage of the Model 112A23 is 5.0 volts, half the bias voltage of most PCB pressure sensors. This will cause the bias monitor meter on PCB power supplies to read at the low end of the green band. 5.0 POLARITY This sensor series produces a positive-going output voltage for increasing pressure input.
hvc2p60fv | Amphenol Global Search | Amphenol
hvc2p60fv | Amphenol Global Search | Amphenol HVC 2.8mm 2 Pos 180° High Voltage Connector（Inline Version） - Hybrid&EV ... As a member of Amphenol Automotive products group, Amphenol Automotive Connection Systems (Changzhou) Co., Ltd., established in 2004, is a wholly owned subsidiary of Amphenol Group in China. ...
Ø21.8 - Amphenol Sine
32.5 Max B2 MODIFY THE INSERT LETTER LOCATION MAY-20-2016 BEN TOMMY B3 UPDATE RATED VOLTAGE NOV-11-2022 JUN TOMMY. ecomate® RM/RSSM/Aquarius™ - Contact Size 20 Options Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021
Model 130B40 ICP® ELECTRET SURFACE MICROPHONE Installation and ... - PCB
Figure 5: One sided Adhesive Pad securing the Surface Microphone and Fairing in place Moderate to heavy air flow Microphone Top single-sided adhesive pad Base double-sided adhesive pad Fairing Low air flow All conditions/ no air flow - 5 - 4.2. Mounting Procedure
REVISIONS - Amphenol Sine
3.5 moisture resistance: ip68 ( im of water for a period of 24 hours, mated condition ) ip69k( mated condition ) 3.6 mating cycle durability: 100 cycles 3.7 rohs compliant 4. mating part: arc12-70px* receptacle ( x = a,b,c,d keys ; * = all modifications) 5. see sheet 2 for other key arrangements 6.contact size and rear seal wire range: 7.
Model 622B11 Precision Industrial ICP® Accelerometer Installation and ...
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 109D12 | PCB Piezotronics
Model 109D12:High pressure ICP® ballistic pressure sensor, 100k psi, 0.07 mV/psi, accel. comp.
Model 123A21 Rocket motor ICP® pressure sensor, 250 psi, 20 mV ... - PCB
Model 123A21 Rocket motor ICP® pressure sensor, 250 psi, 20 mV/psi, Helium bleed, Installation and Operating Manual For assistance with the operation of this product,
Model 119C12 High pressure ballistic pressure sensor, 120k psi, 0 ... - PCB
.200 16.5 20 .50 6.6 50 1.0 3.3 100 Passage Resonance vs. Passage Length Actual resonant frequencies measured in practice may differ slightly from the chart values. These differences are due to variations in the velocity of propagation of sound in air caused by changes in temperature and pressure of the air in the passage. ...
BD210WLP Series Dehydrators - RFS Technologies
Max Capacity 200 SCFD (238L/h), Output Pressure 0.3 to 7.5 PSI (2.1 to 51.7 KPa) Field Adjustable, Single Pressure Outlet, with Real-Time Remote Management, Support Rack and Wall Mount BD210WLP Series Dehydrators REV : 4 REV DATE : 09 Jan 2024 www.rfstechnologies.com
Model 352A59 ICP® Accelerometer Installation and Operating Manual - PCB
Spectral Noise(10 kHz) 5 µg/√Hz 49 (µm/sec2)/√Hz [1] Physical Size (Height x Length x Width) .22 in x 0.48 in x 0.25 in 5.6 mm x 12.2 mm x 6.4 mm Weight .03 oz .9 gm [1] Sensing Element Ceramic Ceramic Sensing Geometry Shear Shear Housing Material Titanium Titanium
WireLock® | FCI Basics | Wire to Board | Amphenol
WireLock® is a 1.80mm pitch wire-to-board and flex-to-wire connector system. Its compact design addresses the growing need for space-saving automotive-grade connectors. WireLock® is a double-row connector system offering four coding types with dif
PRODUCT DATA DRAWING DATE REV DESCRIPTION - SV Microwave
5) surface roughness 63emil-std-10. 6) dia.’s on common centers to be concentric within .005 t.i.r. 7) remove all burrs unless otherwise specified 1132-4096 www.svmicrowave.com title: proprietary the information contained in this drawing is the sole property of sv microwave, inc. any reproduction in part or as a whole without the written ...
RF Coaxial Connectors, Adapters and Cable Assemblies | Amphenol RF
Created Date: 5/4/2001 3:14:11 PM
Model 117B67
%PDF-1.4 %âãÏÓ 167 0 obj > endobj 171 0 obj [/Pattern/DeviceRGB] endobj 18 0 obj > endobj 177 0 obj > endobj 172 0 obj > endobj 170 0 obj >stream xœíÝw ...
DWG NO - Amphenol Sine
18.5 MM 10.0-16.0 MM 12.0-18.0 MM " A MASTER KEYWAY " 35.3 " 35.3 90.5 Max RTS6BS18*23Sxx XXXX A2 -- UPDATE NOTES Jul-06-2017 Nick Tommy A3 -- UPDATE CABLE OD RANGE Aug-24-2017 Nick Tommy A4 -- UPDATE DRAWING Mar-21-2018 White Tommy. Amphenol Sine Systems 44724 Morle Drive, Clinton Tonship, M 48036 USA amphenolsinecom 092021
SHAKERS - Wilcoxon Sensing Technologies
Diameter 2.20 in. (5.59 cm) 5.10 in. (12.95 cm) Weight 2.5 lbs (1.1 kg) 2.8 lbs (1.3 kg) 8.2 lbs (3.7 kg) Recommended matching network N7FS N8HFS N7FS Piezoelectric shakers Wilcoxon’s piezoelectric reaction shakers utilize the expansion and contraction properties of piezoelectric crystals to generate sonic and ultrasonic structural excitation.
Repair and Maintenance Returning Equipment Contact Information ... - PCB
Model 54102-01 Locator Pin 5mm OD x 5.8mm long (1) Model ICS-7 NIST traceable triaxial amplitude response calibration from 10 Hz to upper +/-3dB point. PIN OUT 1 1 2 2 A A B B CODE IDENT. NO. 52681 DWG. NO. SCALE: SHEET DRAWN CHECKED ENGINEER TITLE UNLESS OTHERWISE SPECIFIED TOLERANCES ARE:
Fluid-Trac™ - ssi-sensors.com
The Fluid-Trac™ cost-competitive liquid level sensor family is ideal for tanks or storage containers that have a depth/height of 32 inches (24 inches for gasoline).
amphenol-ns.com
We would like to show you a description here but the site won’t allow us.
REVISIONS - Amphenol Sine
shown only 5 normal seal,red 6 3.8 2.5 1.9 89.66 45.01 75.13 31.80 4x Ø4.29 recommended cutout 4x r0.89 cavity #40 m5 x 0.8-6h threaded insert. part number arc12-40px variants arc12-40pa of: sh: rev: dwg no: title: rev description date revisions eco by appr arc12-40px process specifications: material specifications: quantity approval: engineer ...
208A13 ICP® FORCE SENSOR Revision: J NOTES: 11281 - pcb.com
[5]See PCB Declaration of Conformance PS023 for details. SUPPLIED ACCESSORIES: Model 080A81 Thread Locker (1) Model 081B05 Mounting Stud (10-32 to 10-32) (1) Model 084A03 Impact Cap (1) Model M081A62 Mounting stud, 10-32 to M6 x 1, BeCu with shoulder (1) 3425 Walden Avenue, Depew, NY 14043 Phone: 716-684-0001 Fax: 716-684-0987 E-Mail: info@pcb ...
Model M604B31 Low-cost Triaxial Industrial ICP® Accelerometer ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Wire Bundling Cable Strap
Amphenol TPC Wire Cable SA -51-5 Canada -55-1 Mexico 1---1 tpcire.com efiatns suet t ane Fr ete sefiatns an aaat as ur aes eresentate r a Cable Strap Ratings Features & Benefits ATPC’s Adjustable Cable Strap is a double-sided band made of “hook and loop” material. The 1.5-inch wide, non-abrasive strap will not cut into cable
Model 4115K-06A Rotary Transformer Torque Sensor Installation and ...
angles `.5 degrees 24350 indoplex circle, farmington hills,mi 48335 (248) 888-8260 e-mail: [email protected] dimensions in inches.5 degrees fillets and radii .015 max fillets and radii 0.38 max outline drawing 22675 5 / 8 1 of 1 model 4115k series rotary transformer pte 5/27/22 decimals xx ±.01 xxx ±.005 decimals x ± 0.3 xx ± 0.13 a a 2 2 6 7 5
Model Y683A101001 Indicator / Alarm (for ICP® sensors) Installation and ...
5.000 0.500 25.0 10.00 1.000 50.0 20.00 2.000 100.0 Two 5 Amp Form A relays, additionally two 5 Amp Form A or 10 Amp Form C relays are available. Programmable Time Delay to 9999 seconds. Internal DIP switch selection for Peak or RMS display. User specified, factory installed, High and Low pass 2-pole filtering.
Model M101A06 General purpose ICP® pressure sensor, 500 psi, 10 ... - PCB
Model M101A06 General purpose ICP® pressure sensor, 500 psi, 10 mV/psi, M10x1.0 mtg thd, ground isolated Installation and Operating Manual For assistance with the operation of this product,
10061289 | Amphenol Global Search | Amphenol
Search Results for 10028916 AirMax POWER CONNECTOR MODULES - Amphenol CS 4 2x2* 11.5mm 10028916-xxxxP00LF** 10073379-001LF 6 2x3* 11.5mm 10061290-xxxxxxPLF** 10061289-001LF * indicates the connector set matches the above-board height of an AirMax VS® 3-pair signal connector ** xxxx and xxxxxx are placeholders for contact mating length ...
Model 426B03 Microphone Preamplifier Installation and Operating ... - PCB
8.0 Warranty and Service..... 5 1.0 Introduction Thank you for your purchase of a PCB high quality microphone. These microphones offer highly accurate and reliable acoustic measurements and are typically used in research and design applications. They are accurate enough for laboratory usage, yet rugged enough for field-testing. ...
112160 - Amphenol RF
Title: C:\Documents and Settings\gary.TESTUM-WS01.000\My Documents\Garry's\connex\topseller_folder_3\112160.dwg Author: gary Created Date: 4/5/2003 7:19:17 PM
Model 039037-50022 PCB L&T Rotary Torque Only Transducer, w/Auto-ID ...
Power Required … 5 VDC @ 120 mA max. Recommended Max RPM ¼-in Drive … 5000 3/8-in Drive … 2500 ½-inch Drive … 2500 ¾-in Drive … 2000 1-in Drive … 1000 1 ½-in Drive … 750 2 ½-in Drive … 500 . RS Technologies Division of PCB Load & Torque, Inc. Toll-Free in USA 888-684-2894 716-684-0001 www.pcbloadtorque.com ...
REVISIONS - Amphenol Sine
3.5 moisture resistance: ip68 ( im of water for a period of 24 hours, mated condition ); ip69k( mated condition ) 3.6 mating cycle durability: 100 cycles 3.7 rohs compliant 4. mating part: arc16-24sx* plug ( x = a,b,c,d keys ; * = all modifications) 5. see sheet 2 for other key arrangements 6. contact size and rear seal wire range: 7.
L I S T ITEM - Amphenol Sine
3.5 mating cycle durability: 100 cycles 3.6 rohs compliant 4. mating part: ahdp06-24-21p* ( * = seal type ) 5. all dimensions are for reference use only. 6 contact size and wire range: 7. receptacle is supplied with dust cap. ahdp04-24-21sr-sra a1 release new drawing 12may20 ian of: sh: rev: dwg no: title: rev description date revisions eco by ...