Search Results for axr-5
Model 377A06/ACS-63 1/2 in Free-Field, Prepolarized, 12.6 mV/Pa ...
8.0 Warranty and Service..... 5 1.0 Introduction Thank you for your purchase of a PCB high quality microphone. These microphones offer highly accurate and reliable acoustic measurements and are typically used in research and design applications. They are accurate enough for laboratory usage, yet rugged enough for field-testing. ...
20200110，Amphenol ACC Stripping Tool Table
AFBXD06‐5 Cap AFBXD06‐2 7/8" Foam dielectric, corrugated Spacer 5 Trimming tool AFBXD05 41 Shaping tool AFBXD07 6 * Amphenol Spacer A and B is 7/8" Air dielectric Spacer 6 Trimming tool AFBXD05 42 ‐ ‐ compatible with JMA HCG-InsertA-1/2, HCG-InsertB-1/2. AFBXD05‐42
ICP® PRESSURE SENSOR - PCB
Supplied Accessory: Model 060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel (1) WM - Water Resistant Cable [6][7] Supplied Accessory: Model 060A05 Clamp nut M7 x 0.75-6g thd (1) OPTIONAL VERSIONS Optional versions have identical specifications and accessories as listed for the standard model except
Model 113B22 Platinum Stock Products; High frequency ICP ... - PCB
installed with a hollow clamp nut with 5/16-24 or M7x0.75 external threads. The housing of these models is at electrical ground potential. Series 113B3are similar to the x Series with an B2x additional feature; all Invar construction. The all Invar sensors are designed to have minimal susceptibility to thermal transient events and are
Temposonics
I 5 I Temposonics® EP2 CANopen Datenblatt GÄNGIGES ZUBEHÖR – Weiteres Zubehör siehe Broschüre 551444 Positionsmagnet Kabelsteckverbinder 3 19,5 1,5 33 14 20,5 14,9 btan eneleent Ø 38 Ø 0 M12 2 × 1 Blockmagnet L Artikelnr. 403 448 M12 (5 pol.) Kabeldose, gerade Artikelnr. 370 677
2016-09-22 AST participated in an innovation conference at SZ ...
Intel China Ltd. has held an innovation conference on September 22th 2016 at SZ InterContinental Hotels Group for 2 in 1 computer. On this conference, Intel and partners have presented an excellent speech to introduce industry trend and the Intel newest platform technology.
Amphenol
5 SIZE 20 CONTACTS SIZE 16 CONTACTS -55 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE oC Current-temperature derating curve 8-98 -33 10 07 20-16 16-04 12 08. 7 Insert Availability 22 24 o Rating 3 Sea Level 1013 mbart 8500m (27,900 ft) 320 mbar 21,340m (70,000 ft) 44 mbar Working Voltage Working Voltages ** (nominal) ...
Model 3743G1250G Accelerometer, VC, 50g, triaxial, differential, screw ...
5.0 Sensor Installation . When choosing an installation technique, be certain to care-fully examine the different application characteristics that may affect sensor performance. Characteristics such as mounting lo-cation may limit the use of large mounting blocks or the ampli-
Model 606B01 Low-cost Industrial ICP® Accelerometer Installation ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 601A01 Platinum Stock Products; Low-noise, industrial ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 111A22 General purpose ICP® pressure probe, 5000 psi, 1 mV/psi, 0 ...
Model Number 111A22 PRESSURE SENSOR, ICP® Revision: K ECN #: 54949 Performance ENGLISH SI Measurement Range(for ±5V output) 5,000 psi 34,475 kPa Useful Overrange(for ± 10V output) 10,000 psi 68,950 kPa [1]
Model M102B15 High frequency ICP® pressure sensor, 200 psi, 25 ... - PCB
installed with a hollow clamp nut with 5/16-24 or M7x0.75 external threads. The housing of these models is at electrical ground potential. Series 113B3are similar to the x Series with an B2x additional feature; all Invar construction. The all Invar sensors are designed to have minimal susceptibility to thermal transient events and are
Model M622B01 Precision Industrial ICP® Accelerometer ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 3711F11200G Single Axis MEMS DC accelerometer, 7 mV/g, 200 ... - PCB
Model 3711F11200G Single Axis MEMS DC accelerometer, 7 mV/g, 200 g, 1/4-28 4-Pin Plug Installation and Operating Manual For assistance with the operation of this product,
Model 261B12 Triax force link, charge, 1000 lb (Fx,y,z), 15 pC/lb (z ...
Model 261B12 Triax force link, charge, 1000 lb (Fx,y,z), 15 pC/lb (z), 32 pC/lb (x,y), ground isolated Installation and Operating Manual For assistance with the operation of this product,
Model 601A11 Low-noise, industrial, ceramic shear ICP® accel ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 377B11 Precision Condenser Microphone Installation and Operating ...
8.0 Warranty and Service..... 5 1.0 Introduction Thank you for your purchase of a PCB high quality microphone. These microphones offer highly accurate and reliable acoustic measurements and are typically used in research and design applications. They are accurate enough for laboratory usage, yet rugged enough for field-testing. ...
Model 603M170 Industrial ICP® Accelerometer Installation and ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 604B61 Low-cost Triaxial Industrial ICP® Accelerometer ...
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
D 04/22/15 SD ADDED RIGHT ANGLE NOTE - Amphenol Ardent Concepts
8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 ardent concepts, inc. is prohibited. d 04/22/15 sd proprietary and confidential sizeb title: dwg. no. rev scale: 3:1 sheet 1 of 1 revisions rev. description date approved stripline footprint 12lead 40ghz connector fp12x1-2.54-sl-1 d www.ardentconcepts.com
PRODUCT DATA DRAWING - SV Microwave
5) surface roughness 63 e mil-std-10. 6) dia.’s on common centers to be concentric within .005 t.i.r. 7) remove all burrs unless otherwise specified 7012-1324-1326 www.svmicrowave.com title: proprietary the information contained in this drawing is the sole property of sv microwave, inc. any reproduction in part or as a whole without the ...
AMPHENOL OMNICONNECT INDIA PRIVATE LIMITED
BUREAU VERITAS CERTIFICATION Bureau Veritas Certification (India) Private Limited Regd. Office : Marwah Centre, 6th Floor Krishnlal Marwah Marg, Off Saki-Vihar Road
Model 3711B11200G MEMS DC accelerometer, 10 mV/g, +/-200 g range ... - PCB
Model 3711B11200G MEMS DC accelerometer, 10 mV/g, +/-200 g range, 0 to 850 Hz, 4-pin connector Installation and Operating Manual For assistance with the operation of this product,
Model HT623C01 High Temperature Industrial ICP® Accelerometer ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 137B22A Quartz, free-field, ICP® blast pressure pencil ... - PCB
5.0 CALIBRATION Do not try to calibrate the Series 137B2XX statically. The Series 137B2XX is calibrated dynamically by PCB using a hydraulic pulse technique. For best accuracy, use the calibration certificate supplied. Factory recalibration is available for a nominal charge. 6.0 MAINTENANCE
Model 123A21 Rocket motor ICP® pressure sensor, 250 psi, 20 mV ... - PCB
Model 123A21 Rocket motor ICP® pressure sensor, 250 psi, 20 mV/psi, Helium bleed, Installation and Operating Manual For assistance with the operation of this product,
Model 106B ICP® Acoustic Pressure Sensor, 300 mV/psi, resolution ... - PCB
Sensitivity(± 15 %) 300 mV/psi 43.5 mV/kPa Maximum Pressure(step) 200 psi 1,379 kPa Maximum Pressure 2,000 psi 13,790 kPa [1] Resolution 0.0001 psi 0.00069 kPa [1] Resonant Frequency ≥ 60 kHz ≥ 60 kHz Rise Time ≤ 9 µ sec ≤ 9 µ sec Low Frequency Response(- 5 %) 0.5 Hz 0.5 Hz
20200110，Amphenol ACC Stripping Tool Table - Amphenol Antenna Solutions
AFBXD06‐5 Cap AFBXD06‐2 7/8" Foam dielectric, corrugated Spacer 5 Trimming tool AFBXD05 41 Shaping tool AFBXD07 6 * Amphenol Spacer A and B is 7/8" Air dielectric Spacer 6 Trimming tool AFBXD05 42 ‐ ‐ compatible with JMA HCG-InsertA-1/2, HCG-InsertB-1/2. AFBXD05‐42
Marine Antennas CXL 230-1/DAB - AMPHENOL PROCOM
This 0 dBd omnidirectional base station and marine antenna covers the terrestrial DAB (Digital Audio Broadcast) Band. The antenna is a ½ λ design and this means that it needs neither loading coils, ground-plane, radials nor other auxiliary arrangements.
Model 113B31 High frequency Invar ICP® pressure probe, 200 psi, 25 mV ...
installed with a hollow clamp nut with 5/16-24 or M7x0.75 external threads. The housing of these models is at electrical ground potential. Series 113B3are similar to the x Series with an B2x additional feature; all Invar construction. The all Invar sensors are designed to have minimal susceptibility to thermal transient events and are
Model 1424-01ADB FATIGUE RATED LOW PROFILE load cell, DUAL BRIDGE ...
ANGLES `.5 DEGREES 24350 Indoplex Circle, Farmington Hills,MI 48335 (716) 684-0001 E-MAIL: ltinfo@pcbloadtorque.com DIMENSIONS IN INCHES.5 DEGREES FILLETS AND RADII .015 MAX FILLETS AND RADII 0.38 MAX OUTLINE DRAWING 58129 3/8 1 OF 1 1424 SERIES LOW PROFILE LOAD CELL DEA 05.15.14 DECIMALS XX ±.01 XXX ±.005 DECIMALS X ± 0.3 XX ± 0.13 5 8 1 2 9
Model HT378A06 ICP Microphone System Installation and Operating ... - PCB
8.0 Warranty and Service..... 5 1.0 Introduction Thank you for your purchase of a PCB high quality microphone. These microphones offer highly accurate and reliable acoustic measurements and are typically used in research and design applications. They are accurate enough for laboratory usage, yet rugged enough for field-testing. ...
Model 605B91 Biaxial ICP® Accelerometer Installation and ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 117B25 Conformal ballistics pressure sensor, 356 T S & W, 9 ... - PCB
or using 5/16 open end wrench. Do not tighten when sensor bottoms. 5. Now tighten the screw closing slotted clamp. 6. Using open end wrench, tighten sensor clamp nut. NOTE: It is not necessary to put large amounts of torque on this nut since a pressure seal is not necessary. Approximately 5 to 10 ft. lbs. is sufficient. 7.
Model 443B102 Dual Mode Modular Signal Conditioner Card ... - PCB
Model 443B102 Dual Mode Modular Signal Conditioner Card Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc.
Model 637A06 Cryogenic, industrial, quartz shear ICP accel, 25mV ... - PCB
Transverse Sensitivity ≤ 5 % ≤ 5 % Environmental Overload Limit(Shock) 1,000 g pk 9,810 m/s² pk Temperature Range -320 to +250 °F -196 to +121 °C Temperature Response See Graph See Graph [3] Electrical Settling Time(within 1% of bias) ≤ 3 sec ≤ 3 sec Discharge Time Constant 0.05 to 0.5 sec 0.05 to 0.5 sec
Model 607A01 Swiveler® Industrial ICP® Accelerometer ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 621B51 High Frequency ICP® Accelerometer Installation and ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
AMPHENOL OMNICONNECT INDIA PRIVATE LIMITED
BUREAU VERITAS CERTIFICATION Bureau Veritas Certification (India) Private Limited Regd. Office : Marwah Centre, 6th Floor Krishnlal Marwah Marg, Off Saki-Vihar Road
PRODUCT DATA DRAWING REV DESCRIPTION - NRN 47538 06/23 SEE PDM
5) surface roughness 63 e mil-std-10. 6) dia.’s on common centers to be concentric within .005 t.i.r. 7) remove all burrs unless otherwise specified 500-32-052 www.svmicrowave.com title: proprietary the information contained in this drawing is the sole property of sv microwave, inc. any reproduction in part or as a whole without the written ...
Model 607A12 Industrial ICP® Accelerometer Installation and Operating ...
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Model 601A02 Platinum Stock Products: Low-noise, industrial ... - PCB
when driving long signal cables (see Section 5). Decoupling of the data signal occurs at the output stage of the signal conditioner. A 10 to 30 µF capacitor coupled with a resistor shifts the signal level to essentially eliminate the sensor bias voltage. The result is a drift-free AC mode of operation. 3.0 OPTIONAL FEATURES
Not To Scale - buy.customcable.com
Not To Scale
20200110，Amphenol ACC Stripping Tool Table
AFBXD06‐5 Cap AFBXD06‐2 7/8" Foam dielectric, corrugated Spacer 5 Trimming tool AFBXD05 41 Shaping tool AFBXD07 6 * Amphenol Spacer A and B is 7/8" Air dielectric Spacer 6 Trimming tool AFBXD05 42 ‐ ‐ compatible with JMA HCG-InsertA-1/2, HCG-InsertB-1/2. AFBXD05‐42
Top Sellers Are Now Displayed on Our Home Page | SV Microwave
Discover top-selling RF components! Explore SV Microwave's parametric search for premium selections. Elevate your projects with cutting-edge technology.
Model 3743F112G Accelerometer, VC, 2g, triaxial, damped, differential ...
5.0 Sensor Installation . When choosing an installation technique, be certain to care-fully examine the different application characteristics that may affect sensor performance. Characteristics such as mounting lo-cation may limit the use of large mounting blocks or the ampli-
Model 218C Multi-purpose force sensor, 5k lb comp., 500 lb ... - PCB
[5] See PCB Declaration of Conformance PS158 for details. SUPPLIED ACCESSORIES: Model 080A81 Thread Locker (1) Model 081B05 Mounting Stud (10-32 to 10-32) (2) Model 084A03 Impact Cap (1) Model M081A62 Mounting stud, 10-32 to M6 x 1, BeCu with shoulder (2)
www.cablesondemand.com
We would like to show you a description here but the site won’t allow us.
Model 649A04 Programmable Loop Powered, Current Output ... - PCB
Torque (ft-lb) 2 to 5 2 to 5 Step 1: First, prepare a smooth, flat mounting surface and then drill and tap a mounting hole in the center of this area. A precision-machined mounting surface with a minimum finish of 63 µin (0.0016 mm) is recommended. (If it is not possible to properly prepare the machine surface, consider using an adhesive
Model 121A23 Industrial ICP® pressure sensor, 5000 psi, 1 mV/psi ... - PCB
Stay within the recommended torque range [(5-7 ft-lbs (0.6-0.8 Nm)] when mounting the sensor. It is advisable to use pipe joint compound to assure a tight seal. Use good machining practice in preparing the mounting port. Make sure the seal surface is free of tool chatter marks. Note: Nicks, scratches, or other discontinuities in