Search Results for cover

3 Temposonics® MH-Series MH CANbus Data Sheet */ Resonance frequencies excluded **/ According to calculations under use of the FKM guideline Cycles Ø 7 mm sensor rod Ø 10 mm sensor rod Dynamic pressure: < 2 × 106 pressure cycles 300 bar 350 bar Static pressure: < 2 × 104 pressure cycles 400 bar 450 bar Proof pressure: Maximum 5 minutes testing time for cylinder pressure test 525 bar 625 bar

COMMON SPECIFICATIONS Construction Steel Flexure, Aluminum Cover Output at Rated Capacity 1.5 mV/V Nominal Overload Capacity 150% FS Non-linearity ±5.0% FS

AT&T Mobility Approved IS-48 Indoor/Outdoor Security Shrouds INNOVATIVE ENCLOSED SOLUTIONS™ Charles Industries, LLC Phone: (847) 806-6300 Fax: (847) 806-6231

The Distributed A ntenna S ystems (DAS) function is to enhance the performance of a wireless network coverage of a specific area. DAS is a network of antennas which are all connected to the same source. The DAS solution is more efficient than having a large single antenna to cover an area and that’s why it is highly suited for in-buildings service and a restricted outdoor area.

This platform provides front access to alarm enable/disable switch configuration for uninstalled breaker locations. Also featured are front LED indicators for power/breaker alarms, monitoring status, rear connections for form C relay alarms, and optional nrgSMART connections.

NOTICE: These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other

INPUT/ OUTPUT CONNECTORS SFP+ CONNECTOR AND CAGE For 10Gigabit-Ethernet (10GbE), 8G Fiber Channel and 10G Fiber Channel over Ethernet applications

This series, featuring high-speed contacts, ruggedized harsh environment protection, metal reverse bayonet coupling, signal connector. With four Quadrax contacts per connector and bandwidth up to 1.25 GHz, a data rate exceeding 2.5 Gbps with a standard operating temperature from -55°C to +125°C.

LT-PM639158N2 7 th Printing Page 5 of 11 3.5. Lifting the CUBE See Table 1 for CUBE weight. Charles recommends the following procedure for lifting

FSDC-G Product Specifications & Dimensions Ordering Information Please contact your Charles representative for addition configurations Charles Industries, LLC

SMP-MSSB-PCS15T SMP-MSLD-PCS17T SMP-MSLD-PCS20 PI (12.00±0.1 DIRECTION OF UNREELING AO(5.4 ) SECTION (0.50±0.05) SECTION Cover tape Round sprocket holes

ATM06-2S-SF01 2 Position Plug, Socket, Snap-Fit End Cap,Grey Body (Requires Wedgelock AWM-2S). Comparable to PN# DTM06-2S-E003

1. Package Contents 1: Plug Shell assembly 2: Grommet 3: Cable Cover 4: Socket contact 5: Outer Ferrule 6: Inner Ferrule 2. Recommended wire specification Part 1: Package Contents Part 2: Assembly Wire Size Wire OD (mm) Recommended Min. Pullout force (N) 4.0mm2 5.8±0.2 325 Item 2 Ports (Include all cable sizes)

Charles Industries, LLC An Amphenol Company 1450 American Lane, 20th Floor, Schaumburg, IL 60173 [email protected] (847) 806-6300 Cable Ingress/Egress:

1.2. Product Purpose This OHC is a connection hub for splitting and patching operations. 1.3. Product Mounting and Location This enclosure is suitable for outside plant-type (OSP) locations and those that may require NEC compliance.

91397 Rev B 09/17 Page 3 of 7 1.0 Introduction The MachineryMate™ 200 is a simple to use vibration monitoring and analysis tool that allows easy display of

RFS Technologies designs and manufactures premium-quality cable and antenna solutions for wireless, public safety, distributed antenna system (DAS) and other telecom markets in North America. As an Amphenol company, we’re part of a global powerhouse in high-technology, interconnect, sensor and antenna solutions that’s enabling the electronics revolution across almost every industry.

Amphenol OSFP interconnect system has 60 contacts per port, with a 0.6mm contact pitch and 8 high speed channels. The OSFP footprint is optimized for signal integrity performance and built for use in high speed serial applications. The connector is en

Model 130A25 ICP® ARRAY SHORT MICROPHONE WITH INTEGRAL PREAMPLIFIER. 10-32 CONNECTOR, TEDS Installation and Operating Manual For assistance with the operation of this product,

Model Number 086C04 ICP® IMPACT HAMMER Revision: L ECN #: 48526 [2] Performance ENGLISH SI Sensitivity(± 15 %) 5 mV/lbf 1.1 mV/N Measurement Range ± 1000 lbf pk ± 4448 N pk