Search Results for fuzzy logic control

Antenna Control Unit, Internal RET set, Normal 1 to 3 RET

Digital: 0,1 mm; 0,01 mm (controller depending) Linearity < ± 0,02 % F.S. (Minimum ± 50 µm) Repeatability < ± 0,001 % F.S. Update Frequency Analogue: 1kHz / Digital: controller dependent Connection Type Cable outlet Input Voltage 24 VDC (-15 / +20 %) Current Drain 100 mA typical Ripple < 1 % peak to peak Temperature Coefficient < 40 ppm/ ºC

input vibration information directly to their Programmable Logic Controller (PLC) or Distributed Control System (DCS). This capability allows plant personnel to trend overall vibration data on their machines and correlate vibration data to plant operating conditions, and allows plant operators to schedule maintenance tasks on machinery.

well as the switching logic can be parameterized. IO-Link is an open standard according to IEC 61131-9. It is a serial, bi-directional point-to-point connection for signal transmission and energy supply. The bi-directional communication enables consistent communication between sensors and the controller as well as consistent diagnostic information

Vibration Monitoring in Refinery Applications Under API Standard 670

Indoor agricultural facilities and greenhouses require proper environmental conditions for optimal plant growth and health. Most critical to productivity, quality, and energy conservation are the monitoring and control of carbon dioxide (CO 2) concentration in combination with temperature, humidity, and ambient light (photosynthetically active radiation, or PAR).

We would like to show you a description here but the site won’t allow us.

MDCU-G0000 Archives - Amphenol Antenna Solutions

MTS Sensors Level Plus® Liquid-Level Transmitters M-Series Model MG Digital Transmitter Operation and Installation Manual, Document Number 550791 Revision N (EN) 02/2016 GERMANY GENERAL: Tel.: +49-2351-9587-0 Fax:+49-2351-56491

With ABC Logic enabled (default setting for T8002-ACD-2K) <2% FS over the life of the sensor (typical 15 years) With ABC Logic disabled (default setting on T8002-ACD) <100 ppm or 5% of the reading annual, not to exceed 250 ppm or 25% of the reading (whichever is greater) over 10 years Temperature Dependence ±0.2% FS per °C (±0.11% per °F)

With ABC Logic enabled (default setting for T8002-ACD-2K) <2% FS over the life of the sensor (typical 15 years) With ABC Logic disabled (default setting on T8002-ACD) <100 ppm or 5% of the reading annual, not to exceed 250 ppm or 25% of the reading (whichever is greater) over 10 years Temperature Dependence ±0.2% FS per °C (±0.11% per °F)

With ABC Logic enabled (default setting for T8002-ACD-2K) <2% FS over the life of the sensor (typical 15 years) With ABC Logic disabled (default setting on T8002-ACD) <100 ppm or 5% of the reading annual, not to exceed 250 ppm or 25% of the reading (whichever is greater) over 10 years Temperature Dependence ±0.2% FS per °C (±0.11% per °F)

With ABC Logic enabled (default setting for T8002-ACD-2K) <2% FS over the life of the sensor (typical 15 years) With ABC Logic disabled (default setting on T8002-ACD) <100 ppm or 5% of the reading annual, not to exceed 250 ppm or 25% of the reading (whichever is greater) over 10 years Temperature Dependence ±0.2% FS per °C (±0.11% per °F)

With ABC Logic enabled (default setting for T8002-ACD-2K) <2% FS over the life of the sensor (typical 15 years) With ABC Logic disabled (default setting on T8002-ACD) <100 ppm or 5% of the reading annual, not to exceed 250 ppm or 25% of the reading (whichever is greater) over 10 years Temperature Dependence ±0.2% FS per °C (±0.11% per °F)

Thermometrics NTC Type NC Thermistors - amphenol-sensors.com

With ABC Logic enabled (default setting for T8002-ACD-2K) <2% FS over the life of the sensor (typical 15 years) With ABC Logic disabled (default setting on T8002-ACD) <100 ppm or 5% of the reading annual, not to exceed 250 ppm or 25% of the reading (whichever is greater) over 10 years Temperature Dependence ±0.2% FS per °C (±0.11% per °F)

With ABC Logic enabled (default setting for T8002-ACD-2K) <2% FS over the life of the sensor (typical 15 years) With ABC Logic disabled (default setting on T8002-ACD) <100 ppm or 5% of the reading annual, not to exceed 250 ppm or 25% of the reading (whichever is greater) over 10 years Temperature Dependence ±0.2% FS per °C (±0.11% per °F)

With ABC Logic enabled (default setting for T8002-ACD-2K) <2% FS over the life of the sensor (typical 15 years) With ABC Logic disabled (default setting on T8002-ACD) <100 ppm or 5% of the reading annual, not to exceed 250 ppm or 25% of the reading (whichever is greater) over 10 years Temperature Dependence ±0.2% FS per °C (±0.11% per °F)

With ABC Logic enabled (default setting for T8002-ACD-2K) <2% FS over the life of the sensor (typical 15 years) With ABC Logic disabled (default setting on T8002-ACD) <100 ppm or 5% of the reading annual, not to exceed 250 ppm or 25% of the reading (whichever is greater) over 10 years Temperature Dependence ±0.2% FS per °C (±0.11% per °F)