Search Results for i2c pins

The NovaSensor NPI-19 Digital I2C Pressure Sensor is a member of the NovaSensor NPI Series and incorporates state-of-the-art isolated sensor technology with I2C interface protocols, which gives the OEM user the best in price and performance. These sensors are designed to operate in hostile environments while still providing the same outstanding sensitivity, linearity, and hysteresis of a ...

Search Results for fs1-r38-20a2-10 40.9 A3 - RELEASE NEW DWG FORMAT 11DEC13 DRP - Amphenol Sine Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10-2023 Machined Contacts, Sockets & Pins Part Number DescriptionSize AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 1614 Machined AT62-209-1631 ...

• The measured and corrected bridge values are provided at the digital output pins, through an I2C interface. • Digital compensation of the signal offset, sensitivity, temperature and non-linearity is accomplished via ... C,I2C I²C Clock Frequency 3.4 MHz Symbol Parameter Limits Unit Min Typ Max V dd Supply voltage -0.4 - 3.63 V P

Pin # Digital I2C Function Notes 1 --2 --3 NC Do Not Connect 4 NC Do Not Connect 5 --6 VSS Ground Supply 7 VDD Supply Voltage 8 SDA Serial Data, Calibration Interface 9 SCL Serial Clock, Calibration Interface 10 --11 NC Do Not Connect 12 NC Do Not Connect 13 --14 --Digital I2C Update Mode Output Options NPA I2C Pinout I2C Circuit NPA Pinout

Operating range of -30 to 150°C with temp stability of +/- 0.01°C and uniformity of 0.1°C; Fast Heating and Cooling times; Ability to be used as Dry Block, Liquid Bath and Surface temperature Calibrator

The M4067 Series is a military grade 6U VPX, 115VAC 3 phase, AC-DC PSU card that provides six outputs per VITA 62 and is rated at 700W output power. Features include: conduction cooling, 1” pitch, nternal EMI filters, I2C system management, active power-factor correction. AC input range is 85-265Vac 50-800Hz per MIL-STD-704 and DO-160.

Mini Cool Edge IO is an internal flyover connector system used in server, storage and data centers. Internal flyover is a trend that supports design flexibility and reach for high data rate signals inside the box. With a 0.60mm signal pin pitch and curren

To browse the Venia store, enable JavaScript in your browser.

output pins. A value of 100 Ohms is the suggested value. All dimensions in mm All tolerances ±0.15 mm Pin Diameter = 1.50mm IMPORTANT NOTES All performance is based on conditions at 20°C, 50% RH and 1 atm, using SGX recommended circuitry. Sensor performance is temperature dependant;

• Transmit enable pin for any and all transmitters • LOS pin for any and all receivers • Fault pin – for various errors Supports network protocols: ... laser driver or limiting amplified over I2C. I2C_SCL I2C two wire serial clock input. Pulled to 3.3VDC internally via 4.7k ohm resistor. Able to operate up to 400kHz I2C_SDA

I2C, Serial Data, need Pull-up resistor on host board, SDA pins E1 and E15 are connected together inside OBT G15 A0 Input I2C Address Line, internal 10k Pull-up resistor to VDDTX I15 A1 Input I2C Address Line, internal 10k Pull-up resistor to VDDTX J15 A2 Input I2C Address Line, internal 10k Pull-up resistor to VDDTX

Features • Pressure Ranges from ±0.5 inH2O to 150 psi and ±2.5mbar to ±10 bar • Precision ASIC Conditioning • Digital I2C or SPI Interface or Analog Only Options • 3V, 3.3V and 5V Supply Voltage Options Pressure Sensor Maximum ... Search Results for apc00-18-16p EBY Electro Terminal Blocks and Connectors Custom Terminal Blocks.

• Transmit enable pin for any and all transmitters • LOS pin for any and all receivers • Fault pin – for various errors Supports network protocols: ... laser driver or limiting amplified over I2C. I2C_SCL I2C two wire serial clock input. Pulled to 3.3VDC internally via 4.7k ohm resistor. Able to operate up to 400kHz I2C_SDA

Mounting 19" or 23" Environmental Temperature range -5° to 55° C Humidity 0 to 90%, non-condensing Connections Input terminals -hole compression lug, 10 32 on 5/8" centers Output terminals Screw terminal, #8 Chassis ground Two # 10-32 studs on 5/8" centers Alarm indicators Power, fuse alarms ...

2Digital Pressure Sensor I C | 5 Parameter Symbol Min. Typ. Max. Units SCL clock frequency f FCL 100 400 kHz Start condition hold time relative to SCL edge tHDSTA 0.1 µS Minimum SCL clock low width 1) t LOW 0.6 µS Minimum SCL clock high width 1) t HIGH 0.6 µS Start condition setup time relative to SCL edge t SUSTA 0.1 µS Data hold time on SDA relative to SCL edge tHDDAT 0 µS

-Ethernet Logic signals: Ethernet logic signals including the I2C management bus, power enable, ethernet reset and 3.3V (Can be used as a power output) are routed onto a 6 pin PicoBlade header. This allows switch management via I2C from an external device.-RGMII signals: The RGMII signals of the sixth ethernet port are routed onto a FFC connector.

Panel Mount 3-Pin Male XLR Connector by Amphenol (AC3MMDZB-AU) Black finish Zinc diecast metal shell with solder bucket connections. ... Output Options: Amplified Analog, Digital Serial (14bit), Digital I2C, Uncalibrated mV. On chip temperature sensor in digital mode. Operating temperature range of -40°C to 125°C. https://www.amphenol.com ...

M4268 is a military grade 3U VPX, 28V DC-DC power supply that provides six outputs per VITA 62 and is rated at 1000W output power. Features include: 1” pitch, fast initialization, reverse battery protection, internal EMI filters, I2C and VITA 46.11 system management.

M4268 is a military grade 3U VPX, 28V DC-DC power supply that provides six outputs per VITA 62 and is rated at 1000W output power. Features include: 1” pitch, fast initialization, reverse battery protection, internal EMI filters, I2C and VITA 46.11 system management. DC input range is 18-50V per MIL-STD-704 and DO-160, but variants support ...