Search Results for index

You can display on pages in Scala2 measurements taken by the sensors, such as the spread distance or the pitch and roll of the doors. You can also use the chart or 3D view to display the position of the trawl.

You can change the default colors of the echogram. The ability to configure the color palettes is interesting to highlight specific things, for example to clearly distinguish the sea bottom from fish targets.

You can display a 3D view of the trawl doors and clump(s). This way, you can see the movements of the doors and clump.

X, YY, ZZZ specifies the location of the emitting sensor on the trawl gear.. X: 1 or 2 letters indicating on which gear the sensor is installed.This is useful only for twin, triple, quad and penta trawl gears. YY: 2 letters indicating the part of the gear where the sensor is installed.; ZZZ: numerical code that is a Marport sensor node identifier related to the Mx receiver configuration.

These all-in-one multisensors can measure real-time apparent wind speed and direction, air temperature and calculated wind chill, barometric pressure, relative humidity, calculated dew point and heat index.

You can test the measures taken by the sensor (e.g. battery level, temperature, depth) to check that there are no faults.

You can display 3D views of different elements from the system, for example the trawl doors or trawl speed sensors.

Fiber optic termination is the connection of fiber or wire to a device, such as a wall outlet or equipment, which allows for connecting the cable to other cables or devices.

About Us. Blog; A Guide to Audio Connectors; Telephone Plugs and Jacks; Products. TAC Connectors; M55116 Mil-Spec and Mil-Spec-type Connectors; 7- and 10-Pin Waterproof Breakaway Connectors

You can display the location and trajectory of the trawl behind the vessel if you receive GPS data and have door positioning sensors.

Data such pitch and roll, temperature, depth can be displayed in dials, gauges, history plots or text format.

lưng Bộ chuyển mạch Ethernet & Bộ chuyển đổi phương tiện

From Scala2 , click Menu > Expert Mode and enter the password copernic . Right-click the IP address of the receiver at the bottom of the page, then click Configure Receiver . From the left side of the ...

From Mosa2, click Menu > Expert and enter the password copernic.; Go to the tab Trawl Explorer.; Go to Ping Down Calibration.; Check that the target strength is the one applicable to your target. In this example, it is -39 dB (target strength value of a ping pong ball of 39 mm diameter).

Scala2 can decode and use the following types of NMEA sentences coming from external devices (GPS, winch system, sounder...).. NMEA 0183 Standard Sentences. Symbol (*) indicates which parts of the sentence Scala2 uses.

The Mighty Clamp Trough Support Clamp holds up WaveTrax trough along a horizontal fiber raceway. The snap-together WaveTrax overhead cable raceway system from Amphenol Telect reduces time spent on installations and retrofits.

If you have a trawl with door sensors, you can display a plot to see the distance between the trawl doors. For twin trawls, you can also see the distance between both doors and the clump.

Browse Item # AJ-117BRXL, Miniature Waterproof Jack w/Strain Relief & Solder Terminals in the Amphenol NEXUS Technologies catalog including Item #,Item Name,Description,Conductors,Application,Contact Types,Rear Accessory,Shell Material,Plating Materi

Browse Item # MAJ-17-00, Miniature M55116-Type Connectors in the Amphenol NEXUS Technologies catalog including Item #,Item Name,Description,Connector Style,Shell Styles,Number of Contacts,In-Line Rear Accessories,Contact Types,Shell Material,Finish,M

You can choose to display the echogram beginning from the water surface instead of the default view from the sensor position. Depending on the type of fishery, this is useful to see the trawl descent from the sea surface to the seabed.