Search Results for matlab persistent variable
VIBRATION FUNDAMENTALS - PCB
Piezoelectric accelerometers measure vibration and shock for a wide variety of applications. They incorporate a piezoelectric sensing element with a crystalline atomic structure which outputs an electrical charge when subjected to a load with near zero deflection.
Understanding the Endevco Variable Capacitance Accelerometer Electrical ...
Exceeding the maximum voltage can cause permanent damage. The zero measurand output (ZMO) is the voltage present on the accelerometer’s output at 0 gs (see figure 2). When the accelerometer is on its side, ideally the output should read zero volts.
Model 687A02 | PCB Piezotronics
Model 687A02:Handheld vibration meter measures acceleration, velocity, and complies with ISO 2954 & ISO 10816
Product Data Sheet
Temposonics linear-position sensors use the time-based magneto- strictive position sensing principle developed by MTS. Within the sensing element, a sonic-strain pulse is induced in a specially designed magnetostrictive waveguide by the momentary interaction of two magnetic fields.
Protocol Manual MH-Series with CANopen Safety - temposonics.com
CANopen protocol uses Emergency Objects to inform that the sensor has entered a state of error, or that a state of error has ended. Any Error state will also be visible in the SRDO through Status byte and the position data being set to zero.
Operation Manual R-Series V EtherNet/IP 551971
Temposonics® R-Series V EtherNet/IP™ O I 6 I 3.1 Order code of Temposonics® RP5 3. Identification a Sensor model R P 5 Profi le b Design G Magnet slider backlash free (part no. 253 421), suitable for internal linearization L Block magnet L (part no. 403 448) M U-magnet OD33 (part no. 251 416-2), suitable for internal linearization
Model 685A09 | PCB Piezotronics
Model 685A09:Linear adjust mechanical switch, 0 to 7 g’s, 0 to 100 Hz, pushbutton reset
Model 350C23 | PCB Piezotronics
Model 350C23:Shock, ceramic-shear, ICP® accel., 0.5 mV/g, 10k g range, filtered, 10-ft integral cable mechanically isolated
Model 6634D | PCB Piezotronics
PCB® manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load, and shock in research and development as well as industrial applications. Subscribe to our newsletter to get the latest news & product updates from PCB®. . . . Why PCB?
Model 086D05 | PCB Piezotronics
Model 086D05:Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N)
Model 352C03 | PCB Piezotronics
Model 352C03:Platinum Stock Products; General purpose, ceramic shear ICP® accel., 10 mV/g, 0.5 to 10k Hz, 10-32 side conn.
Model 350B44 | PCB Piezotronics
Model 350B44:ICP® Triaxial shock accelerometer, 1.0 mV/g, 5k g range, mechanically isolated and electrically filtered, 5-ft integral cable
Model 353B17 | PCB Piezotronics
Model 353B17:Platinum Stock Products; High frequency, quartz shear ICP® accel., 10 mV/g, 1 to 10k Hz, 10-ft integral cable
Model 357B14 | PCB Piezotronics
Model 357B14:High temp., miniature (2 gm), ceramic shear, charge output accel., 3 pC/g, 12k Hz, 10-32 top conn. (-95 F to +500 F)
Model 3713F1110G | PCB Piezotronics
Model 3713F1110G:Platinum Stock Products; Triaxial VC MEMS accelerometer, 135 mV/g, 10 g, single-ended, 9-pin
Model 356M41 | PCB Piezotronics
Model 356M41:Low outgassing triaxial, miniature (4 gm), ceramic shear ICP® accel., 10 mV/g, 1 to 10k Hz (+/- 5%), 0.5 Hz 1 dB, 5 ft attached cable
Model 353B32 | PCB Piezotronics
Model 353B32:High sensitivity, quartz shear ICP® accel., 50 mV/g, 1 to 5k Hz, 10-32 top conn.
Model 3741F122G | PCB Piezotronics
Model 3741F122G:Differential VC MEMS accelerometer, 1350 mV/g, 2 g, 10-ft integral cable, pigtail termination.
Model TLD356A02 | PCB Piezotronics
Model TLD356A02:Triaxial, general purpose, ceramic shear ICP® accel., 10 mV/g, 1 to 5k Hz, 14 mm cube size, 4-pin conn., TEDS 1.0
Model EX622B01 | PCB Piezotronics
Model EX622B01:Intrinsically-safe, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 15k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 acc