Search Results for ms3102a-20-15s
TFC Coaxial Cable Product Information Sheet
TFC Coaxial Cable Product Information Sheet Type: T59SCSQ95/95-V (CM-CATV) XXXX-XXXX / HE 08X UNIT Document: t59scsq9595-v (cm-catv) xxxx-xxxx he 08X _1.8ghz19.docx
Home - Amphenol Australia
Home - Amphenol Australia
APXVBBLL15H2_43-C-I20, -A-I20, -C-I20S, -A-I20S - Amphenol Antenna ...
8-Ports, X-Pol, Panel Antenna, 1.5m, 2x 690-960/2x 1695-2690MHz, 65deg, Integrated RET
Thermometrics NTC Type FP07 Fastip Probe Thermistor
B 15 56.5 6.8 M to 10 M D 16 75.6 - D 17 81.0 - Resistance vs temperature characteristics: The nominal resistance range for the zero-power resistance at 77°F (25°C) is shown for each thermobead type and each available material system. Each material system is denoted by an ordering code letter, a referenced curve number and the nominal
Model 4115K-10A TORQUE SENSOR Installation and Operating Manual
Electrical Connector MS3102A-14S-5P MS3102A-14S-5P Electrical Connection Position Side Side Torsional Stiffness 420,000 in-lb/radian 47,500 N-m/radian Rotating Inertia 0.0058 in-lb sec2 0.0007 N-m sec2 Maximum Speed 15,000 RPM 15,000 RPM All specifications are at room temperature unless otherwise specified.
Tooling Instructions - Positronic The Science of Certainty
Size 20 and 22 Signal Contacts Applicable Tools. 9507-0-0-0: A hand-actuated indenter-style hand tool with an adjustable crimp depth feature. ... 9504-15-1-0, 9504-14-1-0 or 9504-15-1-0: These two-piece crimp dies are used to crimp the inner conductor, then the outer shield of then coax cable when terminating size 8 shielded contacts. Instructions.
VQ21T Series Combustible Gas Sensor Elements FEATURES INTRODUCTION ...
Vibration test (see note 4) 20 g, 24 cycle, 100 to 3200 Hz Operation The output of a sensor is dependent on a complex combustion process established around the sensing beads. It is imperative that the layers of gas around the beads are not disturbed, otherwise the bead temperature and hence ... 15 20 25 30 10 20 30 40 50 60 70 80 90 100] TIME ...
C:Users orceDesktopNew folder (7)C-MA7CAE1200-Sx REV A1 - Amphenol Sine
11.0~15.0 mm ma7cae1200-s2 ma7cae1200-s3 7.5~11.0 mm notes: unless otherwise specified 1. material: insulation insert: pa66,ul94 v0 seal: viton, epdm housing body: zinc die cast, nickel plated coupling nut: copper alloy, nickel plated 2. specifications: 2.1 current rating: 10 amps 2.2 voltage rating: 160 v ac/dc 2.3 operating temperature: -20 ...
Electromagnetic shaker system - Wilcoxon Sensing Technologies
20 - 6,000 Hz 15 - 10,000 Hz 10 - 20,000 Hz Power requirements: voltage source current regulating diode 18 - 30 VDC 2 - 10 mA Bias output voltage, nominal 8 VDC Output impedance <100 Ω Electrical noise, equiv. g: Spectral 10 Hz 100 Hz 1,000 Hz 15 µg/√Hz 5 µg/√Hz 1 µg/√Hz Connector2 BNC Output cable R1-2-J93-10-L1 Force gage nominal values
B B3 - Amphenol Sine
MP20M23F MS20M23F 22-20 0.34-0.50 Gold Flash SP20M2F SS20M2F 22-20 0.34-0.50 Gold Flash MP20M23G5 MS20M23G5 22-20 0.34-0.50 Gold 5µ” SP20M2G5 SS20M2G5 22-20 0.34-0.50 Gold 5µ” MP20M23G10 MS20M23G10 22-20 0.34-0.50 Gold 10µ” SP20M2G10 SS20M2G10 22-20 0.34-0.50 Gold 10µ”
D-Sub Standard Board Mount Connectors - Amphenol CS
15 25 37 50 Contacts Pin P Socket S Durability Standard class (≥200 mating/ unmating 4 High performance class (≥500 mating/unmating) 6 Standard series, RoHS compatible ... 9 to 37 contacts 7.20 50 contacts 8.60. www.amphenol-cs.com Disclaimer Please note that the above information is subect to change without notice. ACPADSUBSTDBMT0324EA4
R SeriesAnalog Temposonics
Temposonics® Sensor model RP-Profile RH-Hydraulicrod Design Profile Temposonics® RP: S-Magnetslider,jointattop V-Magnetslider,jointatfront M-U-magnet,OD33 Rod Temposonics® RH: M-FlangeM18x1.5(Standard) V-FlangeM18x1.5(Fluorelastomerhousing-seal) D-FlangeM18x1.5withbushingonrodend R-FlangeM18x1.5withthreadM4atrodend J-FlangeM22x1.5,rodØ12.7mm,800bar S-Flange¾"-16UNF-3A
B A5 - Amphenol Sine
15.0 STANDARD MOLDED COLOR IS GREY. ADDITIONAL COLORS SHOWN IN PART NUMBER CHART ARE AVAILABLE VIA SPECIAL ORDER. REQUIRES CONTACT ... AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed Tooling - Stamped & Formed Contacts MFX-3950 Crimp Die - Size 16 ...
Single band, panel antenna with fixed electrical tilt
35 30 25 20 15 10 5-90-120 -60-150 -30 180 0 150 120 90 60 30 35 30 25 20 15 10 5-90-120 -60-150 -30 180 0 150 120 90 60 30 Horizontal | 850 MHz 0° | Vertical | 850 MHz 2° | Vertical | 850 MHz 5° | Vertical | 850 MHz 696-900 MHz BXA-70040-8CF-EDIN- X Single Band | Panel Antenna | X-Pol | 40° | 20.1 dBi | Fixed Tilt.
Datasheet - sgxsensortech.com
time), and the humidity should not be less than 15% RH; Stepsforusage 1. Warm-up • The SMELL module is designed to have a plug-and-play function, but due to the electrochemical nature of the hydro gen sulfide sensor, after receiving the calibrated product, it still takes about 20 minutes to warm up the machine when it is first powered on.
97-3102a-10s-2s | Amphenol Global Search | Amphenol
3102a-20-15s | Amphenol Global Search | Amphenol 97-3102A-10S-2S | Amphenol Global Search | Amphenol An extremely versatileconnector family, the 97 Series offers six shell options, 128 different contact arrangements, 1 to 52 circuits, one of the largest selections of insert patterns on the connector market, and crimp, solder, thermocouple and ...
Miscellaneous Mobile Antenna Accessories - PCTEL
Different types of mounts, gaskets, plugs and ground plane disks for mobile antennas.
1710-2170 / 1710-2170 MHz - Amphenol Antenna Solutions
35 30 25 20 15 10 5-90-120 -60-150 -30 180 0 150 120 90 60 30 35 30 25 20 15 10 5-90-120 -60-150 -30 180 0 150 120 90 60 30 35 30 25 20 15 10 5-90-120 -60-150 -30 180 0 150 120 90 60 30 10° | Vertical | 1800 MHz 10° | Vertical | 1900 MHz 10° | Vertical | 2100 MHz REV010615O www.amphenol-antennas.com 4 of 4
DWG NO - Amphenol Sine
2 pl dec –0.15 quantity signatures fractions –1/64 angles –1° approval: engineer: checked: drawn: scale: date part number dwg no: revision c-type sheet of description item sine systems - www.amphenol-sine.com 44724 morley drive this drawing is supplied for information only. design features, specifications and performance data
AT1612-13PB-RDG 13-Way Flange Mount Receptacle with Gasket a
AWG: 10-14, 14-20; Amperage: 25A,13A; Mating Parts: AT1612-13SB* Plug; Wedgelock Part Number : Wedgelock not required; No. of positions: 13; ... Our Product Lines > A Series > BoardLock Series > BoardLock AT13/15 (Flanged, Self-Threading) Recently Viewed Items. Turn History Off