Search Results for n 20 252 4113 c

Corrosion Resistant - available in standard MIL-DTL-38999 olive drab cadmium (175°C) and electroless nickel plating (200°C), both withstanding 2000 hours of salt spray exposure. The base material is able to withstand an indefinite exposure to salt spray. ... Capacitance Range: 20 pF to 1 mF; Capacitance Tolerance: +/- 20%;

Environmental Sealing: IAW connector specification Corrosion Resistance: 500 hours salt spray EMI Shielding: 360 degree shielding on each pair Mating Cycles: 500 cycles Voltage Rating: 500 Vrms max @ sea level Dielectric Withstanding Voltage: 500 VAC RMS sea level Temperature Range:-65C to 175C Bandwidth: Up to 1.25 GHz Data Rate: Exceeding 2.5 Gbps. Voltage Rating: 500 Vrms max. @ sea level

A 2.92mm Female PCB Edge Launch Connector, 4 Leg 1521-00002 by SV Microwave. This 2.92mm series connector can provide consistent performance.

N-Type to C-Type Adapters; N-Type to FME Adapters; N-Type to F-Type Adapters; N-Type to HD-BNC Adapters; N-Type to HN-Type Adapters; N-Type to MCX Adapters; ... RG-59 Plenum 20 AWG, Belden 4505P, Belden 82108, Belden 9104, Belden 1506A, Belden 1825A, Belden 1826A, Belden 89108, Belden 89259: Contact Finish: Gold: Contact Material:

Widely used across the mobile networks industry. Amphenol's harsh environment AARC plug and receptacle assemblies are available in 2-fiber or 4-fiber configurations. Based on the N-Type RF threaded connector housing, this interconnect system provides superior optical performance in outdoor environments using LC-style 1.25mm ceramic ferrules.

Amphenol is one of the leading manufacturers of Minitek127 ® 1.27MM. Contact us today for more details of Minitek127 ® , part number 20021221-00020C4LF.

Fiber Terminal Enclosures – Indoor. Fiber Wall Solutions (CFWS) Fiber Terminals, Building (CFBT) Fiber Building Terminal – Multi-Compartment (CFBT-D3)

code c, class .76, over nickel per ams-qq-n-290, class 1, .00010" min. performance: impedance: 50 ohms freq. range: dc to 25.0 ghz. notes: 1. dimensions apply prior to pre-tinning 2. sn63 solder required in hatched area. 3. solder permissble on outer and adjacent surfaces of body in this area. 4.

RF Connector N-Type Panel Mount Plug 4-Hole Flange Flat Tab 50 Ohm

B Code B N No HVIL C Code C D Code D 14mm Plug. North America Asia Amphenol Industrial Operations 20 Valley Street Endwell, NY13760-3600 USA Tel: +1-888-364-9011 Fax: +1-520-397-7169 www.amphenol-industrial.com Email: [email protected] Amphenol Technology(Zhuhai) Co., Ltd.

RF Connector SMA Straight Crimp Jack RG-55 RG-142 RG-223 RG-400 Bulkhead 50 Ohm

c Step 1 Strip cable jacket, braid, and dielec-tric to dimensions in table above. [for RG-62,71,210/U cable, trim an additional.039"(1.0mm) of insulation off center conduc-tor and add bushing] All cuts are to be sharp and square. Important: Do not nick braid, dielectric, and center conductor. Slide outer ferrule onto cable as shown.

Amphenol Alden Products is a leading provider of cable assemblies and connectors for a wide variety of medical applications. As a preferred partner to ‘Top 30’ and entrepreneurial medical device companies alike, we provide interconnect solutions that leverage our extensive expertise in design and manufacturing – for simple products like high voltage wire connectors to complex medical ...

Amphenol is one of the leading manufacturers of 0.80mm Board to Board/Wire Connectors. Contact us today for more details of BergStak ® , part number 61083-101400LF.

ComptelG, S.A. de C.V. - Mexico GSS Caribbean Microlink - Colombia Microlink - Peru TVC Communications — Mexico, Caribbean, Central America, South America — Broadband, satellite and audio/visual markets Communications Supply Company, a division of WESCO Distrbution, Inc. — Worldwide, except Colombia — Enterprise markets

Operating Temperature -40°C to +70°C Mating Cycles 100 minimum Cable Retention 445 N (100 lbs) Strain Relief 100 lbf Accepted Cable Diameter 4.8mm - 7.0mm Submersible Up to 20 ft of water head Threading Standard SCTE 5/8” - 24 UNEF Amphenolbroadband.com | 800-677-2288 DS-60-1836 Rev. 4.0. Optional Anti-rotating nut Anti-twist Feed-thru Body

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

Input Impedance Ω 5000±20% 5000 ±20% Output Impedance Ω 5000±20% 5000 ±20% Zero Offset mV ± 75 ±10 Full Scale Output mV 40 to 120 10°H 20 100 to 166 5 psi to 30 psi 75 to 135 1 psi Linearity %FSO ±0.25 BFSL ±0.25 Pressure Hysteresis %FSO ±0.20 ±0.15 Temperature Coefficient of Zero μV/ V / °C ±30 ±20 Temperature Coefficient of

• Operating Temperature Range: -20°C to +75°C MECHANICAL PERFORMANCE • Insertion Force: ≤40 N • Withdrawal Force: ≥15 N • Durability: 50 cycles TERMINATION • Power Wire Sizes: • 2 x 6mm2 • 10mm2 • 16mm2 • 25mm2 • Product Specifications • GS-12-1162 • GS-12-1246 CERTIFICATIONS & APPROVAL • UL 1977

AT62-20-0444 Gold plated, Machined Female Contact, Size 20, Wire Range 0.35 - 0.5MM² REQUEST A QUOTE ATT-20-00 - Size 20 Stamped and Formed Contact Tool 16-20 AWG