Search Results for pendulum sweeper

Intrinsically-safe, high frequency, industrial, ceramic shear ICP® accel, 10 mV/g, 0.8 to 15k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration. Sensitivity: (±5%) 10 mV/g (1.0 mV/(m/s²))

Model 629A31:Triaxial, industrial, ceramic shear ICP® accel., 100 mV/g, 0.8 to 8k Hz, side exit, 4-pin conn., triaxial frequency sweep ISO 17025 accre

The OP714 is a portable calibrated transmitter, supporting in-building DAS and BDA testing with fixed and sweep features for network design and commissioning of critical communications and cellular networks.

The CW and Programmable Sweep Transmitter | 100 MHz – 2.5 GHz (OP714) is a portable transmitter, supporting in-building DAS and BDA testing with fixed and sweep features for network design and commissioning of critical communications and cellular networks. Ready to start testing?

Supports Isolation, Leakage, BDA Sweep Test and Signal to the Building Tests Guided preparation in SeeHawk® Touch Guided testing using a PCTEL kit and CW transmitter

Platinum Stock Products; General purpose, industrial, quartz shear ICP® accel., 100 mV/g, 0.3 to 12k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration. Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))

Model 630A91:Triaxial, industrial, ceramic shear ICP® accel., 100 mV/g, 2 to 7k Hz, top exit, 4-pin M12 conn., triaxial frequency sweep ISO 17025 accr

High-freq., industrial, ceramic shear ICP® accel, 100 mV/g, 0.8 to 15k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration. Sensitivity: (±5%)100 mV/g (10.2 mV/(m/s²)) Frequency Range: (±3dB)48 to 900000 cpm (0.8 to 15000 Hz)

Intrinsically-safe, industrial, ceramic shear ICP® accel, 100 mV/ips, 3 to 9k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration. Sensitivity: (±10%)100 mV/in/sec (3937 mV/m/sec)

Low freq., industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10k Hz, top exit, 10-ft integral armor cable, frequency sweep ISO 17025 accredited calibration. Sensitivity: (±5%)100 mV/g (10.2 mV/(m/s²))

Ring-style, industrial, quartz shear ICP® accel, 100 mV/g, 0.8 to 10k Hz, side exit, 2-pin conn., M6 mounting stud, frequency sweep ISO 17025 accredited calibration. Sensitivity: (±5%) 100 mV/g (10 2 mV/(m/s²))

Platinum Stock Products; Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10.5k Hz, side exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration. Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))

High frequency triaxial, industrial, ceramic shear ICP® accel., 100 mV/g, 0.5 to 13k Hz, side exit, 4-pin M12 connector, triaxial frequency sweep ISO 17025 accredited calibration. Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))

calculate the results. A simple test method of measuring impact force versus displacement, and then integrating for the area under force-displacement curve provides an. utput in energy units. However, what force output could the engineer expect to measure .

High freq ceramic shear ICP® accelerometer, 10 mV/g, 1.6 to 30k Hz, SS case, top exit, 5-44 connector, frequency sweep ISO 17025 acc cal, off ground, hazardous area app. Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))

Mounting is generally recommended on the casing of the compressor as close to the radial bearings as possible. A comprehensive predictive maintenance program that includes monitoring vibration on typically critical rotary screw compressors can improve downtime and increase efficiency with maintenance scheduled in advance of catastrophic failure.

Each PCB® Modally Tuned®, ICP® instrumented impact hammer features a rugged, force sensor that is integrated into the hammer’s striking surface. “Modal Tuning” is a feature that ensures the structural characteristics of the hammer do not affect measurement results.

consist of sensing crystals that are attached to a seismic mass. A preload ring or stud applies a force to the sensing eleme.