Search Results for pl182x-60-6

6 FUNCTIONS AND SIGNALS INHIBIT The INHIBIT signal is used to turn the power supply ON and OFF. To turn the power supply OFF, apply a TTL “0” signal or SHORT to SIGNAL RTN. To turn the power supply ON, apply a TTL “1” signal or leave this pin OPEN. If not used (always ON), leave this pin OPEN. This signal is referenced to SIGNAL RTN ...

The Amphenol Tri-Power connector series incorporates your choice of RadSok contacts, Temper-Grip High Current contacts, or standard high power contacts. Paired with the proven performance of the MIL-DTL-38999 connector series, the Tri-Power series offers a variety of tooled arrangements specifically designed to carry high current (70 to 250 amps per contact, 240 to 1000 amps per connector).

15g / 10 - 2000 Hz, IEC-Standard 68-2-6 Overvoltage protection Accuracy Resolution - Displacement-Update time Linearity Repeatability Temperature coefficient Hysteresis Operating conditions Magnet speed Operating temperature Dew point, humidity Protection 1 Shock test Vibration test Standards, EMC test Electromagnetic emission EN 50081-1

Available with integrated backshell technology; Mating endurance of 500 operations for gold plated contacts; Fully intermateable and intermountable with BS 9522 F0017, and MIL-DTL-26482 Series 1 (solder)

SV Microwave introduced the SMPS Male PCB Edge Launch Connector, FD 3811-40003. Enhance your system's RF performance with us. Place your order now!

1.6 1.8 2 0 5 10 15 20 25 30 35 40 VSWR Frequency (GHz)-140-130-120-110-100-90-80-70-60 0 10 20 30 40 Isolation (dB) Frequency (GHz) Figure 3 Test Setup for Mated Pair VITA 67.3 SMPS Figure 3.2 Gated VSWR Plot (typical) Figure 3.1 Gate flag position for SMPS Mated Pair Measurement Figure 3.3 Electrical Isolation Plot (Mated Pair)

Vibration test 20 g / 10…2000 Hz, IEC standard 60068-2-6 (excluding resonant frequencies) EMC test Electromagnetic emission according to EN 61000-6-3 Electromagnetic immunity according to EN 61000-6-2 The sensor meets the requirements of the EU directives and is marked with Operating pressure Up to 350 bar (5076 psi) Magnet movement velocity ...

Model 003:Low noise, coax, 29 awg, blue PTFE cable (price per foot)

Thermometrics, Inc., offers one of the most comprehensive ranges of temperature measurement and sensor products in the world today. From chips to value-added assemblies, with temperature ranges from -196ºC to 1150ºC, Thermometrics products play a vital role in measurement, control and protection of industrial and consumer-based applications worldwide.

(4°-26.67° C), and 30%-60% relative humidity. TABLE 1: SPECIFICATIONS LLCR 60, 63, 67 mΩ Max Depending on wire size D.W.V 500 VAC / No DWV required after humidity I.R 1000 MΩ Current Rating 0.5A Shock 50 G Half-Sine Vibration Frequency Ranges: 50 to 2000 Hz Peak Level: 10gn for 45 minutes in each axis Thermal Shock -55°C TO +80°C Humidity

For regular 120-volt house electricity, it changes phase 60 times per second. This is often abbreviated as 60 Hz. The complex relationship between this magnitude and phase means that an AC circuit’s impedance consists of 3 essential components that are resisting the flow of the alternating electrical current.

Parameter Limits Units Condition Min Typ Max Chip Size 1.8 x 1.8 mm2 Diaphragm Size 1.4 x 1.4 mm2 Active Area 0.7 x 0.7 mm2 Internal Resistance 42 60 78 kW 25°C

We offer highly automated Cable Assemblies for Low & High Speed Automotive Ethernet. High reliable and tested Cable Assemblies for standard interfaces (acc. ISO 8092-6) supporting Low Speed Ethernet 100 Mbps and 1 GBps UTP (IEEE 802.3bw), 1 GBps STP (IEEE 802.3bp / Open Alliance TC9) and High Speed Ethernet - 10+GBps STP / SPP (IEEE 802.3ch).

Used with: 602-Series (081B97, M081B97) 604/605-Series (081A68, M081A68) 624-Series (081A67, M081A67) 629-Series (081A56, M081A59)

6.5 in (16.5 cm) 0.8 in (20 cm) 6.5 in (16.5 cm) – – 6.5 in (16.5 cm) – Cable Bulk Weight: 225 lbs per 1000 ft: 6.25 lb per 1000 ft: 225 lbs per 1000 ft – – 225 lbs per 1000 ft – Center Conductor Style: Stranded, shielded twisted pair: Stranded, coax: Stranded, shielded twisted pair: Stranded, shielded ribbon: Stranded, unshielded ...

22 awg: 35.6 N 24 awg: 22.2 N 26 awg: 13.3 N 28 awg: 8.9 N 30 awg: 6.6 N Apply an axial pullout force on the wire at a rate of 25+/-6mm per minute. 11 Thumb Latch to Ramp Yield Strength 58.8 N minimum Yield Strength. Full mate and then unmated the connector at a rate of 25+/-6mm per minute. 12 Durability 30 mating/ unmating cycles at a

Width 170 mm (6.7 in) Depth 60 mm (2.4 in) Net Weight 0.37 kg (0.8 lbs) Operating Temperature -55° to +60° C (-67° to +140° F) Radome Material ABS Radome Color White, RAL 9003 Mounting Options Fasteners and screws included for wall mounting ORDERING OPTIONS Select from the following ordering options SELECT MODEL NUMBER

seal surface should be flat & free of tool marks with a minimum finish of 63 [1.6] for best results DIMENSIONS SHOWN ARE FOR A .850 [21.59] THICK WALL. COUNTERBORE FOR THICKER WALLS

Available Inventory: 60. 7038-0371 VITA Cable Assemblies 7038-0371 Add to compare list Datasheet. Customers Also Viewed. Part # 9311-60220 SMPM VITA 67.3 10 Port Plug-In Module C Available Inventory: 182. 9311-60220 VITA Connectors 9311-60220 Add to compare list ...