Search Results for power usb

Amphenol's Single Pair Ethernet (SPE) connectors for Industrial applications bring direct Ethernet connectivity to peripheral devices like sensors, actuators, and vision system cameras that operate at speeds up to 1Gb/s.

Micro power plus cable side housing, Dual row, 3.0mm pitch, 10 positions

Support PCI Express, SATA/SAS, USB 2.0/3.0 and 10 Gigabit Ethernet high-speed serial interfaces; Amphenol technologies for shield-less design with no metallic plates and closely coupled differential pairs ... ground or power; Compatible with Hardmetric equipment design practice; Complies with the Hardmetric form factor requirements outlined in ...

In order to provide higher speed and smaller size solution on networking equipment and server, Amphenol has developed SlimSAS low profile connector which is used in application of UPI1.0, 11.2GT/s, 24Gb/s SAS signal or 16GT/s PCIe signal.

By expanding beyond board-to-board applications, designers can now connect power supplies and power distribution The PwrBlade ® cable connectors are designed to mate to PwrBlade ® right-angle or vertical board-mounted headers. ... USB. Server & Storage System. Card Edge. Memory Module. Solid State Drive (SSD) Storage. FFC/FPC. PCIe ...

17 SERIES IP67 RJ45 / USB / FO / Power Bayonet. RJ45 patch cords; IP67 RJ45; IP67 USB; IP67 Fiber Optic LC Duplex & adapters; IP67 Power Bayonet; Accessories IP67 RJ45 / USB / FO / Power Bayonet; CONEC Hybrid connectors. Hybrid overmoulded; Hybrid field attachable; Hybrid receptacles; Hybrid tools/accessories; Circular Connectors Sensor Actor ...

The Amphenol Socapex mCom 10 Gb+ is a miniature, high-speed Cat6A & Cat7 Ethernet connector that exceeds 10Gb/s Ethernet following IEEE 802.3an-2006: 10GBase-T. With a maximum external diameter of 15mm, it is a Cat.6A connector according to TIA568C.2 and ISO/IEC11801 standards. The connector is environmentally tested based on MIL-DTL-38999 Series III military spec (Thread version) and MIL-DTL ...

Cable assemblies from IMI Sensors are built to withstand virtually any environment for predictive maintenance, process monitoring, and power generation applications. Choosing the right cable assembly for your application is essential for the successful installation and operation of sensors, as cables are often the first component to fail in a ...

The universal transmitter provides two valuable power supply features. The transmitter can utilize a wide range of power supplies without issue. The power supply must be 21.6-253 VAC or 19.2-300 VDC, 50 or 60 Hz. The transmitter can supply power to any type of IMI Sensors’ products, regardless of whether it requires loop power or ICP® power.

Proposed from 2.54mm to 1.27mm pitch, with signal, power, RF, optic or high-speed contacts, we have some compliant products with Ethernet or USB protocols. Amphenol Socapex can combines his board-to-cables offer with I/O connectors such as MIL-DTL-38999 to offer a complete harness from the panel to the board.

Amphenol's 2.70mm ultra-thin Micro SD and SD card sockets saves on space and has a shielded design for superior signal integrity (SI) performance.

Three-wire low-power vibration sensor USB power supply. Provides 5 VDC excitation voltage drawing USB power from portable vibration calibrators. Terminal strip landings for power, signal and ground, BNC output

Micro Power 3.0 Connector System - G881 Series, Wire to Board connector, , Vertical, Single row, 3.0mm pitch, 04 positions , 100μin Tin, 3.20mm tail length, LCP ...

The HCI connector system anticipates the continued trend toward increased system power demands that is driving the need for increased power density. The HCI^® connector system is designed to address requirements that extend beyond the capabi

Amphenol brand USB 3.0/3.1 Cables are engineered with heavier wire gauge (AWG) power lines with the requisite pinned resistor needed for safe usage with USB power and charging applications. Available in USB 3.0/3.1 Gen 1 Type A-A Cable, USB 3.0/3.1 Gen1 Type A-B Cable and USB 3.1 Gen2 Type A-C Cable varieties.

Building upon our experience in 12V and 5V power, Casco leads the development of automotive high voltage outlets. From NA and Europe to Asia, from 110V to 230V, Casco’s outlets enable your home experience in-vehicle – the new mobile office or worksite power. In meeting the challenges of the automotive environment, Casco successfully designs ...

NETBridge+^® Automotive Ethernet Connector transmits up to 100Mb/s and 1Gb/s (100BASE-T1, 1000BASE-T1), upgradeable to 10Gb/s for automotive applications.

USB 3.0 (USB 3.1 GEN 1) now operates with full-duplex signaling over two differential pairs, improving host-directed simultaneous-by-directional communication. Over 10X performance increase over USB 2.0; Backward compatible with USB 2.0; High-speed 5Gb/s transmission; Optimized Power Efficiency; Fast Sync-N-Go

Micro Power Plus, Vertical, Dual row, 3.0mm pitch, 8 positions, 100μin Tin, 3.18mm tail length, LCP, Black, TRAY

Micro Power 3.0 Connector System - G881 Series, Wire to Board connector, , Right angle, Singlel row, SMT, 3.0mm pitch, 06 positions , 100μin Tin, SMT, 2 board locks ...