Search Results for rear transition module

system when one pair of blade module contacts are powered to 20 amperes. One blade module are constituted by 3 pins. The temperature rise above ambient shall not exceed 30o C at any point in the system when the other pair contacts are powered at 7.0 amperes.(refer to para. 10.0 layout drawing) The following details shall apply: a.

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

Available in 2, 3, 4, 6, 8, 12 and 18 position . Amphenol Sine Systems’ AT Series™ SR01 and SR02 connectors are a high-performance, thermoplastic, cost-effective solution with specificallydesigned, wire cavities that protect each individual wire seal, eliminating stress on the rear seal while maintaining an IP68/69K rated (mated) performance regardless of wire bundle direction or improper ...

Amphenol's 1.0mm pitch, vertical card edge connectors enable all generations of PCI Express ® (PCIe). PCIe card edge connectors support 2.5Gb/s (Gen 1), 5.0Gb/s (Gen 2), and 8.0Gb/s (Gen3) per differential signal pair and provide x1,

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

Each module is shipped in static-protective packaging to prevent electrostatic charges from damaging static-sen-sitive devices. Use approved static-preventive measures, such as wrist straps, when handling modules outside of their protective packaging. A module intended for future use should be tested as soon as possible and returned to

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

65846-015LF. PV® Wire-to-Board Connector System, Mini Latching, Double Row, 6 Positions, Polarized, 2.54 mm (0.100in) Pitch, Housing.

10158558-R282111LF. FlexLock™ 2.54mm, Signal FPC-to-Board Connector Platform, Receptacle, 28 Position, Top Latch, Tin (preplated)

High-Performance and Flexibility with New SMA to SMP Cable Assembly Configuration. Amphenol RF is pleased to introduce a new configuration of SMA to SMP assemblies to our expansive line of fixed-length cable assemblies. This assembly consists of a straight SMA plug with a right-angle SMP plug and utilizes the popular Tflex 405 cable type from Amphenol Times Microwave Systems which is a ...

4 to 20 mA outputs (4 per module) eLeCtrONICs Input voltage: 115 Vdc ±10%: transmitter supply: 24 Vdc ±20% supply: Display: Decimal format 3.2 inch, 128 x 64 PPI LCD with yellow : LED backlight: eNVIrONMeNtaL enclosure rating: NEMA 4X: Front panel: NEMA 4X (Front panel overlay - UV rated) Humidity: 0 to 80% relative humidity,

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

MT VITA 66.0 3-Port Fiber Module Open.Tech offers a full line of VITA 67.1, 67.2, 67.3 and hybrid RF/Fiber 66.5 backplane modules, plug-in modules and contacts that are designed for side-by-side implementation with VITA 46 hardware. Open.Tech VITA interconnects are the latest addition to the VPX platform and are available in high-density SMPM ...

AT16-18PC-EKSR02 18 Position Receptacle with Strain Relief End Cap, Pin, Keyed C, Green

LUTZE Inc. 13330 South Ridge Drive • Charlotte, North Carolina 28273 • USA Phone: 704-504-0222 • Fax: 704-504-0223 • E-Mail: info (at) lutze.com

T1 and R1. When the module is first plugged in, the current surges to approximately 100 mA and decreases quickly to a steady simplex current of approximately 30 mA. This low value of dc current being applied to the 4W cable pairs, on a simplex basis, will break down any resistance film which may build up at nonsoldered splices.