Search Results for rel t5x frequency response

Frequency Range± 10 % 0.7 to 6,000 Hz 0.7 to 6,000 Hz Resonant Frequency ≥ 18 kHz ≥ 18 kHz Electrical Isolation(Base) ≥ 108 Ohm ≥ 108 Ohm Size - Hex 0.75 in 19.1 mm Size - Height 0.98 in 24.9 mm Q - Extended discharge time constant [1] Frequency Range± 5 % 0.1 to 4,000 Hz 0.1 to 4,000 Hz Frequency Range± 10 % 0.07 to 6,500 Hz 0.07 to ...

Frequency Range(± 3 dB) 16 to 480,000 cpm 0.27 to 8,000 Hz [2] Resonant Frequency 960 kcpm 16 kHz [3] ... 5,000 g pk 49,050 m/s² pk Temperature Range -65 to +250 °F -54 to +121 °C Temperature Response See Graph See Graph [3] Enclosure Rating IP68 IP68 Electrical Settling Time(within 1% of bias) ≤ 4.0 sec ≤ 4.0 sec Discharge Time ...

Calibration of industrial accel. with full frequency response plot and NIST-traceable certificate: 1: 080B45: Protective thermal boot for use with series 625 sensors: 1: 081A73: 1/4-28 x 1.34" hex head captive thru bolt: 1: Optional Versions (CS) Canadian Standards Association Approved Intrinsically Safe.

Omnidirectional Fiberglass Antenna, 406-512, 5.1dBi, N Female

DC Response Accelerometer Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-828-8840 24-hour SensorLine: 716-684-0001 Fax: 716-684-0987 E-mail: info@pcb.com Web: www.pcb.com

High frequency, ceramic shear ICP® accel., 10 mV/g, 5 to 60k Hz, 5-44 top conn. This miniature accelerometer model achieves extremely high frequency response from 5 Hz to 60 kHz, and incorporates a LP filter to ...

frequency is intentionally lowered to reduce the response to higher frequency energy present in shock events. The relatively low resonance also creates displacements of the seismic element sufficient to introduce squeeze film damping. Air is used rather than a fluid so thermal effects on damping are negligible.

response for measuring uniform (or constant) acceleration and low-frequency vibration . For this reason, they are often used to: • mass. A high natural frequency is accomplished through the Perform ride quality assessments of elevators, automobiles, trains, and amusement park rides. ness. • Analyze the low frequency characteristics of ...

cryogenic temperatures, phase response, extended high or low frequency response, extended range, leak testing, hydrostatic pressure testing, and others. For more information, contact your local PCB Piezotronics distributor, sales representative, or factory customer service representative. Returning Equipment

The decibel scale is logarithmic and more closely matches the response reactions of the human ear to the pressure fluctuations. Some examples of typical sound pressure levels are shown in the table below. dB Pressure Example 0 0.00002 Pa Threshold of Hearing 60 0.02 Pa Business Office 80 0.2 Pa Shop Noise 94 1 Pa Large Truck

Selecting a year value will change the event content. Select year:

To explore the impact that sensor mounting has on the sensor frequency response, frequency response data was captured (presented in Figure 3) for a sensor that was: • Mounted with a stud with grease on a flat dry surface. • Mounted with a stud without grease on a flat dry surface. • Mounted with a flat magnet on a flat clean surface.

Streamline in-building and outdoor wireless network testing with this data collection and reporting software for use with PCTEL ® scanning receivers. An intuitive touchscreen interface gives you access to all of your scanner’s features, along with easy-to-use tools for grid-based in-building testing, radio uplink testing, BDA commissioning, troubleshooting, and reporting.

cryogenic temperatures, phase response, extended high or low frequency response, extended range, leak testing, hydrostatic pressure testing, and others. For more information, contact your local PCB Piezotronics distributor, sales representative, or factory customer service representative. Returning Equipment

cryogenic temperatures, phase response, extended high or low frequency response, extended range, leak testing, hydrostatic pressure testing, and others. For more information, contact your local PCB Piezotronics distributor, sales representative, or factory customer service representative. Returning Equipment

ACS-103 Phase and Amplitude Calibration from 2 Hz to +5% of frequency range (1) M081A113 Mounting screw assembly (2) Entered: BLB Engineer: BAM Sales: BLB Spec Number: Date: 08/26/2008 Date: 08/21/2008 Date: 08/27/2008 32890 3425 Walden Avenue Depew, NY 14043 UNITED STATES Fax: 716-684-0987 E-mail: info@pcb.com Web site: www.pcb.com

Frequency Range: (-5%)0.05 to 75000 Hz; DC Power: +9 to +18 VDC; Specification Notes [1] The low frequency tolerance is accurate within ±20% of the specified frequency. [2] Frequency tolerance is within ± 5% of the specified value. [3] Contact factory for other available frequencies. ... Phase Response (at 1 kHz)

phase response, extended high or low frequency response, extended range, leak testing, hydrostatic pressure testing, and others. For information on standard recalibration services or special testing, contact your local PCB Piezotronics distributor, sales representative, or factory customer service representative.

This compensation acts to extend the frequency characteristics and enhance the transient response of the sensor. The machined diaphragm is made from maraging steel, selected because of its high strength and durability. The combination of the short, rigid element and stiff diaphragm give these sensors a high

frequency response from the sensor. 2.5 Series 116 High Sensitivity Sensor The Series 116 High Sensitivity Sensor is a special- purpose high temperature charge mode pressure sensor designed specifically to measure low-level pressures in in engines, hydraulic and pneumatic devices, compressors and turbines. ...