Search Results for rosenberger connector
Wire-to-Board Connectors | FCI Basics - Amphenol CS
Both these PCB mounted connectors are offered in Standard, Plus and Super variants. While the Mini power connectors come with 4.20mm pitch, the Micro power connector offers even more compact connections with a 3.00mm pitch. Standard Mini Power connectors are generally used for power applications that support current ratings up to 9A per pin.
Pyle MIL-DTL-83723 Circular Connectors - Amphenol Aerospace
MIL-DTL-83723, Series III Connector Performance Characteristics: Operating Temperature Data: Std: –85°F (–65°C) to 392°F (200°C) Class K types meet fireproof test per MIL-DTL-83723 2000°F (1093°C) High-Temperature Series: Operates at 500°F (260°C) Altitude: Sea Level to 110,000 feet:
Rectangular, Thermoplastic Connectors for Harsh Environment Applications
Amphenol Sine Systems’ ATS Series™ Connectors are a high-performance, IP67 and IP69K rated (in mated condition), rectangular, thermoplastic, cost-effective solution for harsh environmental applications with superior seals and seal retention capabilities. The connector design incorporates an integral latching system that ensures a definitive
USB Connectors | Standard/Rugged/Waterproof | Mini, Micro, Type A, Type ...
Amphenol is one of the earliest adopters of USB 3.1 Gen 2 Type C connector and has a comprehensive range of USB 2.0, 3.0, and 3.1 generation connectors that comes in straight, right angle, surface mount and through hole configurations.
HD-AFI Connectors - Amphenol RF
Amphenol RF offers a broad range of radio frequency HD-AFI Connectors including industry standard designs and highly engineered Amphenol RF proprietary interfaces. Check product specs & datasheets for a wide selection of HD-AFI Connectors at Amphenol RF online.
AMMC Connectors - Amphenol RF
The AMMC (Amphenol Micro-Miniature Coaxial) connector series is a low profile (1.4 mm height off the board) series with an extremely small board footprint (2mm x 2mm). This series is used in applications with 50 Ω impedance requirements, and has a performance from DC to 6 GHz. The coupling style of the AMMC connector series is snap-on for ...
F-Type Connectors - Amphenol RF
Amphenol RF offers a broad range of radio frequency F-Type Connectors including industry standard designs and highly engineered Amphenol RF proprietary interfaces. Check product specs & datasheets for a wide selection of F-Type Connectors at Amphenol RF online.
Power Connectors | Products - Amphenol
ASGP is a power connector specially designed for rail vehicles receiving maintenance in the garage repair station when high circuit power is cut off. This IP67 rated connector has 4pcs of 18mm Radsok for power and 6pcs of 3.6mm spring wire sockets for signal. ASGP offers a wide range of current up to 500A and its rated voltage is 500V.
RF Coaxial Connectors, Adapters and Cable Assemblies | Amphenol RF
Amphenol RF is the world’s largest manufacturer of coaxial connectors for use in radio frequency, microwave, and data transmission system applications. Headquartered in Danbury, Connecticut, USA, Amphenol RF has global sales, marketing and manufacturing locations in North America, Asia and Europe.
D38999 Connectors with Coaxial, Concentric Twinax ... - Amphenol Aerospace
Amphenol Connectors are ideally suited for the incorporation of shielded contacts for high-performance interconnection applications. The circular family is built around MIL-DTL-38999 specifications, with Mil-approved and commercial styles offered. Normal operating voltage for circulars with power contacts only is up to 900 VAC (RMS) at sea level.
Board-to-Board RF Connectors - Amphenol RF
The SMP connector system is a 50 ohm board-to-board solution offering performance through 26.5 GHz, with the ability to enhance performance to 40 GHz for some designs through PCB optimization analysis. This dependable mating system utilizes the three-piece configuration, and a design focused on keeping a consistent RF signal with ample float (0 ...
Push Pull Connectors | Products | Amphenol Aerospace
Amphenol push/pull connectors provide audible and tactile feedback, a system that provides immediate feedback when the connector is mated. An audible and sensory click immediately indicates when the two connector halves are securely fastened, providing an important piece of feedback and assurance under high-pressure circumstances.
348 Series | Products | Amphenol Aerospace
The 348 Series connector provides reliability and high contact density. Qualified to the MIL-C-81511, these connectors can accommodate a minimum of 3 circuits to a maximum of 155 circuits. Features & Benefits: Lightweight, environmentally resistant, and will operate at sea level to a voltage of 600 VAC (RMS) It will perform under high ...
67 and 165 Series Miniature Connectors - Amphenol Aerospace
(unsealed) Refers to connectors with no provisions for sealing front or rear areas (sealed) Refers to connectors that are potted or pressurized in mounting, with front and rear areas sealed. Mounting Dimensions (For all 67 Series square flange connectors) Connector Size: A: B: Suggested Mounting Hole: 12.812: 1.031.700: 14.906: 1.125.822: 28: 1 ...
TNC Connectors - Amphenol RF
TNC connectors are produced with standard and reverse polarity. Reverse polarity is a keying system accomplished with a reverse interface, and ensures that reverse polarity interface connectors do not mate with standard interface connectors. Amphenol accomplishes this by inserting female contacts into plugs and male contacts into jacks to ...
D38999 Series III Bulkhead Feedthrough Connectors - Amphenol Aerospace
Amphenol Aerospace's Bulkhead Feedthrough connectors are double-ended receptacles with feedthrough contacts that mate to standard Mil-Spec D38999 plugs. Available in multiple shell and contact styles, they are designed to meet applicable requirements for 38999 Series III and allow for long-term ease of assembly and serviceability as well as ...
CF38999 Multi-Channel Fiber Optic Connector - Amphenol Aerospace
Additional, composite connectors features include: Lightweight - 17%-70% weight savings; Increased Corrosion Resistance-olive drab cadmium (175°C) and electroless nickel plating (200°C) both withstand 2000 hours of salt spray exposure; Durability-1500 couplings minimum (in reference to connector couplings, not termini)
LC Field Fiber Optic Connector | Circular Connectors
The LC Field Fiber Optic Connector is sealed against fluids and dust, no cabling operation in field and no tools required for installation.
High POWER - Amphenol Aerospace
connector offerings with advanced contact technology and new contact termination methods resulting in unrivaled catalog customization. Utilizing two proven connector interfaces (Matrix 5015 and GT-5015) and a host of tooled insert arrangements, Amphenol has a connector for every high power application. DESIGN CHARACTERISTICS
Connector Assemblies - TPC Wire
HDLC Series Connector Assemblies. The HDLC connector series was developed specifically to meet the demands of industrial environments and shares the same shell dimensions, contact layouts, and electrical performance characteristics as the common MIL-C-5015 connectors.