Search Results for s parameter

Card edge connectors have evolved rapidly over the years and are today used even in the most sophisticated electronic devices. These connectors are much easier for upgrades and are generally very durable with smooth mating surface areas while supporting high data rates with excellent signal integrity.

Insertion Loss, expressed in dB is defined as 10*log (Po/Pi) where Po= Power Out and Pi=Power In.. There are 3 main causes of Insertion Loss: Reflected losses are caused by the VSWR of the connector.. Dielectric losses are caused by the power dissipated in the dielectric materials (Teflon, rexolite, delrin, etc.).. Copper losses are caused by the power dissipated due to the conducting surfaces ...

Amphenol introduces the Gen 5, Minitek® Pwr PCIe® connector system. This new introduction CEM 5.0 PCI Express® 12VHPWR auxiliary hybrid connector and cable assembly support the 600W GPU cards. The 12VHPWR connector is not designed to mate

This series, featuring high-speed contacts, ruggedized harsh environment protection, metal reverse bayonet coupling, signal connector. With four Quadrax contacts per connector and bandwidth up to 1.25 GHz, a data rate exceeding 2.5 Gbps with a standard operating temperature from -55°C to +125°C.

Amphenol's PCIe^® Gen 5 Flip CEM 1.0mm pitch vertical card edge connector with "JJ" or "LL" contacts is ideal for close placement to the PCB board edge and avoiding stubs.

Amphenol's backplane connectors support high speed application with speeds up to 112Gb/s. Our board-to-board backplane connectors are available in right angle, orthogonal and coplanar configurations.

› S-Parameter file (.S2P) › Footprint review › xlsx data output Each optimization is uniquely performed around the customer’s • Board materials (dielectric constants) • Layer thicknesses • Complete PCB stack-up 3D models of the customer’s PCB board and along with in-house simulation is used to analyze and provide corrective ...

This question addresses VSWR (Voltage Standing Wave Ratio) and Return Loss, which are both a measure of the same parameter. That is, the amount of signal reflected by a connector.

The purpose of this document is to explain the de-embedding process of a an ICFP. This will help you get the S-Parameter data for the device alone. The Procedure: 1. Connect the De-Embed Probe to Port 1 of the PNA and connect a 50Ω load to Port 2 of the PNA. It is important

For customer convenience, various levels of contacts are offered by Amphenol CS. For quick responses, live chat facility is made available. Customers can also contact us via filling the forms made available.

DDR5 SO-DIMM connectors deliver high-speed and bandwidth. Being half the size of regular DIMMs, they lower power consumption and promote better thermal management. 262 positions SO-DIMM connector is available in 4.00mm height with standard option. Sketchi

Peripheral Component Interconnect Express (PCIe ®) is the most common standard for high speed interface that connects various server and storage components with the motherboard.Amphenol has an array of Card Edge connectors supporting PCI Express ® Gen 3, Gen 4 and Gen 5 standards along with PCIe ® M.2 Connectors which provide high performance and differential signaling in low profiles.

• To provide S-Parameter or SPICE/HSPICE model of connector for use in high-speed electric channel • 3D printing station • Dedicated mold base & tool frame • Captive tool room for quick support on tooling • Simulation capability with required contact pressure • Put quality first by introducing IATF 16949 into your business.

ELECTRICAL SPECIFICATIONS Cal. Board and S Parameter P1 Frequency Range MHz 3300-3800 MHz 3300-3600 3600-3800 Coupling between Cal. Port to Input Port dB -26 ± 2 Coupling Amplitude Accuracy dB ≤ 0.9 Coupling Phase Accuracy degrees ≤ 7° VSWR --- ≤ 1.5 Maximum Power Watts 50 W ISO Co-Polar at 2-6° Tilt dB ≥ 19 ISO Co-Polar at 7-12 ...

This application note provides detailed information for observing the S-parameter performance of the TR Assembly using the Evaluation Kit. Evaluation Kit: The scattering parameter performance of the TR Assembly can be observed by an Evaluation Kit offered by Amphenol Ardent Concepts. The Evaluation Kit contains a TR Assembly, PCB mounting board ...

This week’s question comes to us from Dan in Oregon: What is the difference between 50 Ohm and 75 Ohm Coax? Hi Dan, thank you for this excellent question. This topic comes up quite frequently because a vast majority of electronics manufacturers fail to adequately explain the difference between the two types of coax and precisely why their equipment needs one type over the other.

integrity reports and S-parameter models •.5mm high density contact pitch in two rows 0 • 7 Stack heights: 4mm to 7mm (0.5mm increments) • 6 Sizes: 20 to 90 positions (10 position increments) TARGET MARKETS/APPLICATIONS •ortable and mobile electronic equipment P •edical and instrumentation M •oint-Of-Sale/ retail equipment P

Amphenol is proud to announce that Yifan Huang and Stephen Smith will present a technical paper titled “PCIe Gen 5 CEM Connector and Add-In Card PCB design optimizations” at DesignCon 2019.

Amphenol introduces to the market the next generation interconnect solution – ExtremePort™ Swift is a 0.60mm pitch, extremely low-profile connector capable of transmitting high-speed signal up to PCIe ® Gen 5 and target for PCIe ® Gen 6 under extreme mechanical condition.. The ExtremePort™ Swift not only provides a SI performance ready signal transmission media but also a new way of ...

PCIe ® Gen 4 and Gen 5 connectors meet PCIe ® 4.0 and proposed 5.0 standards, ensuring high-speed performance, with backward mating and PCIe ® 3/2/1 compatibility.