Search Results for scsi-3
Model 393A03 | PCB Piezotronics
3 to 7 Nm * All specifications are at room temperature unless otherwise specified. Accessories. Supplied: 081B20: Mounting stud, 1/4-28 to 1/4-28 x 0.365" long, BeCu w/shoulder: 1: 085A31: Protective insulated boot: 1: ACS-1: Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable: 1:
Amphenol Connectors | Cable Assemblies | Interconnects | Mobile, RF, Optics
Amphenol's DSFP cable assemblies are designed to support applications for Ethernet and Fibre Channel. The Amphenol DSFP products offer an ultra-high-performance, cost effective solution for 10G/25G/50G speed applications in switched fabric I/O, switches, routers, data storage arrays, and high-performance computer (HPC) clusters.
DA T 3XXX 001+010+018
3) under operating conditions >108 Ohm Do not connect or disconnect under load. Metal housing parts shall be securely incoporated to protected ground. Remark for gold plated contacts: In order to avoid brittle inter-metallic connections, gold plated terminals have to be tin-plated in the solder area.
Model 010G10 | PCB Piezotronics
4-conductor, shielded, FEP cable, 10-ft, 4-socket plug to (3) BNC plugs (labeled X,Y,Z) For applications with EMI, see 010T10. Cable assembly consists of the following components: Model 010 cabling Model AY connector Model JW connector. Specification Notes. English: SI: * All specifications are at room temperature unless otherwise specified.
WPA-700102-8CF-EDIN-X - Amphenol Antenna Solutions
Single Band, 1-Port, Panel, VPOL, 102°, 696-960 MHz, 16.6 dBi, Fixed Tilt (0° or 3°), 2404 mm (94.6 in)
SCU Installation Guide - Amphenol Antenna Solutions
3. Connect the AISG female port on the SCU to the AISG network control cable 4. Go to the “Start” menu 5. Select the following in order in order to change the TCP/IP settings on the PC a. Settings b. Network Connections c. Local Area Connection d. Properties e. Internet Protocol [TCP/IP] f. Properties 6. Select “Use the following IP ...
ROHS COMPLIANT PRODUCT DATA DRAWING D DCN 34173 05/06 JMC - SV Microwave
3) break corners & edges .005 r. max. 2) all dimensions are after plating. x' 1) all dimensions are in inches [millimeters] dimensions are in inches tolerances: fractional: 1/64 angular: x per asme y14.5m - 1994 finish: material: b dwg. no. surface area: scale: 5:1 sv microwave, inc. see notes see notes material: body, press cap &
AFSI SUPPLIER QUALITY CLAUSE GUIDE
CABL 3 Master Reels 15 FAI First Article Inspection Conditions 15 IMTE 1 Documentation and Usage of Gauges 15 IMTE 2 Return of Gauges 16 MAT Material Certification 16 OUTP 1 Plating Standard 16 OUTP 2 Micron Industries Specialty Clause on behalf of Raytheon 16 SHELF Shelf Life of Consumables 16 . 4 ...
B B2 - Amphenol Sine
2.3 operating temperature:see chart. 2.4 dielectric withstanding voltage:less than 2 milliamps current leakage@2000 volts ac. 2.5 insulation resistance:5000 megohms min. 2.6 ip--class:ip67 (mated condition). 2.7 mating cycles durability:500 cycles(min). 2.8 rohs compliant. 3. suitable contacts :16# contacts. 4.
3603-81 T1 Controller Unit Installation Guide
3. Using the card ejector, remove the unit from the shelf. 4. Follow the procedure for installing a new unit. Wiring the Unit Use the following steps to wire the unit. Step Action 1. Connect T1 to the rear panel RJ48 jack (J1). 2. If using the Ethernet network management inter-
Amphenol SF-NDAQGF100G-003M 3m QSFP28 to 4 x SFP28 Splitter Cable (30 ...
Amphenol’s revolutionary 3m (9.8 ft) 100-Gigabit Ethernet QSFP28 to 4 x 25-Gigabit Ethernet SFP28 Splitter Cable offers IT professionals a cost-effective interconnect solution for merging new 100GbE QSFP28 and 25GbE SFP28 enabled host adapters, switches and servers. For typical applications, users can install this splitter cable (a.k.a. “octopus” or "fan-out" cable) between an available ...
Amphenol
www.amphenol-industrial.com Amphenol 6 1000V DC Product Dimensions - Receptacle Ordering Information - 1000V DC Receptacle Example: Item Screw Termination Crimp Termination Busbar Termination Inline Crimp Termination
Assembly Instructions-C26 Amphenol BNC
3-PIECE CRIMP PLUGS Amphenol Connector Cable Hex Crimp Data Stripping Dimensions, inches (mm) Number Type RG-/U Cavity for Cavity for Die Set for CTL Series Contact Outer Ferrule Tool 227-944* Tool Number ab c 36650-1003 BNC Plug Belden 82907, 88240
Amphenol Network Solutions > Products | Amphenol Network Solutions ...
22425 East Appleway Ave #11 Liberty Lake, WA 99019 Phone: 509.926.6000 Email: [email protected]
SATA (Serial ATA) Connectors
wwwaenoliccco Disclaimer Please note tat te aove inoration is sect to cane itot notice TECHNICAL INFORMATION SATA (Serial ATA) Connectors MATERIAL § Contact Base Metal: Copper alloy § Contact Area Finish: Gold over nickel § Solder Area Finish: Tin over nickel § Retainer Clip Base Metal: Copper alloy § Retainer Finish: Tin over nickel § Housing: High temperature thermoplastic
Internally amplified velocity sensor - Wilcoxon Sensing Technologies
± 3 dB 5 - 4,000 Hz 2.5 - 7,000 Hz Resonance frequency, mounted, nominal 30 kHz Transverse sensitivity, max 5% of axial Temperature response: –50°C +120°C –15% +5% Power requirement (current draw) < 0.5 mA Electrical noise, equiv. in/sec, nominal: Broadband 2.5 Hz to 25 kHz
c10-738986-2as1 | Amphenol Global Search | Amphenol
Designed for unshielded, internal or external I/O connectors. Compliant with T10/Serial Attached SCSI (SAS-4) standard. Supports many assembly options. Features & Benefits. Part Numbers. ... This quartz sensor measures near-static and dynamic pressures from full vacuum to 3 000 psi (15 000 psi optional). It measures transient or repetitive ...
Series 3 - amphenol-in.com
TABLE OF CONTENTS. The Highest Performance MIL-DTL-38999* Connector; The Ultimate Subminiature Cylindrical
PRO-PHY450-3SI - AMPHENOL PROCOM
3-Channel Hybrid Combiner . Download . Product PDF; Add to quote. Description. The PRO-PHY series of hybrid combiners has been designed to help identify the optimum solution for combining several transmitters into one antenna. All hybrid combiners are suitable for 19” rack mounting. Single isolators fitted as standard. ...