Search Results for terminal lug
terminal lug | Amphenol Global Search | Amphenol
Input terminals 2-hole compression lug, 10-32 on 5/8" centers Output terminals Screw terminal, #8 Chassis ground Two # 10-32 studs on 5/8" centers Alarms Alarm indicators Power, fuse alarms Alarm type Form C Alarm connector 0.045" square pin Relay contact ratings 0.6A at 48 VDC; 1A at 120 VAC Compliance Agency compliance NEBS Level 3, UL, CE
terminal lug | Amphenol Global Search | Amphenol
4.2.4 J-STD-002: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires. 4.3 AFCI Laboratory Reports - Supporting Data 4.3.1 EL-2015-04-022 4.3.2 DG-2015-05-025 5.0 Requirements 5.1 Qualification Connectors furnished under this specification shall be capable of meeting the qualification test requirements specified herein.
terminal lug | Amphenol Global Search | Amphenol
10. Remove (pull off) the input terminal covers. 11. Clean terminals and lugs with a non-abrasive, non-metallic cloth or pad. 12. If desired (highly recommended), lightly coat antioxidant on lugs, terminals, and contacting surfaces and then connect lugs to input terminals on panel. 13. Torque the KEPS nuts to ~20 in.-lb (~2.3 N•m). 14.
terminal lug | Amphenol Global Search | Amphenol
Force Electrical Terminal provides value to your purchasing, engineering, quality and manufacturing objectives. Amphenol Amphenol Corporation Amphenol Industrial Operations 40-60 Delaware Avenue, Sidney, New York 13838-1395 Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157 www.amphenol-industrial.com Amphe-Power 5015 connector with insert ...
terminal lug | Amphenol Global Search | Amphenol
• Terminal Mounting Plate BDO-ETS: • Available in 8” and 10” diameters • Terminal Mounting Plate with Built-In Splice Tray Holder BDO304-ET. charlesindustries.com ... 97-500512-A Ground Lug (pkg. 100) 97-FIBR24TRAY 4”x9” Charles Fiber Splice Tray, with dust cover, identification label and 6 cable ties ...
terminal lug | Amphenol Global Search | Amphenol
lug. 2. Attach the cable bonding clamp to the cable. 3. Attach the stranded #6 AWG jumper ground wire ... Thread the Ground Feed-Thru stud through the wire terminal and attach the Ground Feed-Thru to the shelf.
terminal lug | Amphenol Global Search | Amphenol
Lottery terminals & slot ... right angle has threaded lug) B - 1 port, vertical connector, through hole mounting, gasket on front shell flange F - 1 port, vertical connector, threaded lug mounting . Unique Special Code . No Digit - Part defined by previous 10 digits 1 to 9 - Unique special feature. Note 4
Power Solutions - Amphenol Global Interconnect Systems
Our power lugs, produced by Amphenol Interconnect Products Corp., are durable, low-voltage drop terminations fabricated from the stranded ends of the cable. Since the wire is used to make the lug, the circuit current rating is limited only by the wire. ... The wide product range includes busbars, terminals, power distribution blocks and ...
terminal lug | Amphenol Global Search | Amphenol
Insulate lug barrels with UL94 V-0 rated heat-shrink tubing. 12. Clean the terminals and lugs with a nonabrasive, nonmetallic pad. 13. If required, lightly coat anti-oxidant on lugs and input BATTERY and RETURN terminals. 14. Connect the lugs to input terminals on back of panel, as shown in Figure 5. 15. Tighten the lugs to 45 in.-lb. (5 N•m ...
terminal lug | Amphenol Global Search | Amphenol
lugs onto #8 AWG to #4/0 AWG copper wires. Insulate lug barrels with UL94 V-0 rated heat-shrink tubing. 12. Clean the terminals and lugs with a nonabrasive, nonmetallic pad. 13. If required, lightly coat anti-oxidant on lugs and input BATTERY and RETURN terminals. 14. Connect the lugs to input terminals on back of panel, as shown in Figure 5. 15.
terminal lug | Amphenol Global Search | Amphenol
Search Results for terminal lug PC420VR-10 Vibration transmitter, velocity, RMS, 1.0 in/sec Vibration transmitter, 4-20 mA output proportional to RMS velocity vibration, 1.0 in/sec full-scale measurement range, ±5% tolerance at full scale, operates up to 105°C, top exit 2-pin MIL-C-5015-style connector
terminal lug | Amphenol Global Search | Amphenol
The SurLok™ non-environmental compression lug is a cost-effective, field-installable, and highly reliable alternative to traditional high-conductivity, cast copper one or two-hole compression lugs. ... The ring and spade terminals are made from 100% electrolytic copper and are tin plated. Terminals are available as individual pieces or tape ...
terminal lug | Amphenol Global Search | Amphenol
Input terminals 2-hole compression lug 0.375" stud size on 1" hole spacing, size up to 750 MCM Output terminals, high-current 2-hole compression lug #10 stud size on 0.625" hole spacing, size up to 2 AWG Output terminals, GMT 6-32 panhead screws (max. lug width of 0.32"/8.1 mm) torque to 6.3 in.-lb. (0.7 N·m)
terminal lug | Amphenol Global Search | Amphenol
Input terminals 2-hole compression lug 0.375" stud size on 1" hole spacing, size up to 750 MCM Output terminals, high-current 2-hole compression lug #10 stud size on 0.625" hole spacing, size up to 2 AWG Output terminals, GMT 6-32 panhead screws (max. lug width of 0.32"/8.1 mm) torque to 6.3 in.-lb. (0.7 N·m)
terminal lugs | Amphenol Global Search | Amphenol
Lug Terminals are available in non-plated, tin-plated and color-coded. They have annealed terminals for easy crimping, along with seamless barrels for a secure accurate crimp. Hoff-Trex® Tubular Lugs are perfect for industrial wire and cable connections.
terminal lug | Amphenol Global Search | Amphenol
Input terminals 2-hole compression lug 0.375" stud size on 1" hole spacing, size up to 750 MCM Output terminals, high-current 2-hole compression lug #10 stud size on 0.625" hole spacing, size up to 2 AWG Output terminals, GMT 6-32 panhead screws (max. lug width of 0.32"/8.1 mm) torque to 6.3 in.-lb. (0.7 N·m)
terminal lug | Amphenol Global Search | Amphenol
Insulate lug barrels with UL94 V-0 rated heat-shrink tubing. 12. Clean the terminals and lugs with a nonabrasive, nonmetallic pad. 13. If required, lightly coat anti-oxidant on lugs and input BATTERY and RETURN terminals.
terminal lug | Amphenol Global Search | Amphenol
Search Results for terminal lug Amphenol MIL-DTL-26500, Pyle - Amphenol Aerospace ... Designed for power distribution purposes, the monoblock assemblies are made of terminal junction block, for copper or aluminum cable connections. Monoblock assemblies are available with individual or shunted terminals, from 1 to 12 terminals, in different ...
terminal lug | Amphenol Global Search | Amphenol
The lug terminals can vibrate loose, become elongated, or otherwise fail. Failure of these terminals results in the rail vehicle stopping on the track. PAGE 1 AC/DC traction motors provide locomotive power to electrical multiple units (EMU’s).
terminal lug | Amphenol Global Search | Amphenol
Terminal ID (mm) 300 系列 300 Series 35mm² 9.0 50mm² 11.0 70mm² 12.5 Rev.01 20230518 Document No: 8P1208 PL00X-300-30DXX 10mm管状端子插座安装说明 The Assembly Manual for PL00X-300-30DXX 10mm 1POS Receptacle Tubular Lug 1：线材规格 1：Cable Specification