Search Results for tvp07dz-15-35p

6 Terminating Contacts (for use with multi way connectors) Pin terminator 3KΩ±5% - 711-0176-3K also 77Ω±1% Socket terminator 3KΩ±5% - 711-0125-3K also 77Ω±1% Dummy Contact and Seal Plug Kit (for use with multi way connectors) Pin 711-0174-P

843 Progress Drive Frederick, D 101 Tel: +1 (301) 330 8811 [email protected] wilcoxon.com buy.wilcoxon.com Wilcoxon Sensing Technologies Industrial vibration sensor selection: piezovelocity transducers

MTS Sensors Level Plus® Liquid-Level Sensors M-Series Model USTD II Digital Transmitter Operation and Installation Manual, Document Number 550980 Revision F, 02/2016 3 Product overview The Level Plus Model USTD II Liquid-Level transmitter is a continuous multi-functional magnetostrictive transmitter that provides product

Temperature : 15 ~ 35 ˚C Relative humidity : 25 ~ 85 %Rh. Atmospheric pressure : 86 ~ 106 kPa PDS: Rev :D STATUS:Released Printed: Aug 07, 2023. NUMBER GS-12-449 TYPE PRODUCT SPECIFICATION TITLE PAGE REVISION 2 59453series FPC connector (0.5mm pitch, SMT type) of 7 D AUTHORIZED BY DATE ...

NUMBER: AS‐001 CATEGORY: APPLICATION SPECIFICATION AMPHENOL ARDENT CONCEPTS TITLE: 16 Pair SMT Mount micro‐LinkOVER Connector

• 0.59 in (15 mm) diameter x 0.87 in (22 mm) long cylinder with o-ring seals • 1/4–18 NPT male port with 7/8 in flange • 1/8–27 NPT male port with 7/8 in flange • Thermal accuracy FSO 0.2% typical • Custom configurations and other pressure ranges can be accommodated. Applications • Process control systems • Hydraulic systems ...

Amphenol's High-speed FPC (Flexible Printed Circuit) Flex Connectors come in both ZIF and Non-ZIF versions. These are offered in 0.21mm to 2.54mm pitch sizes and feature strong FPC retention.

1.7 N-m (15 in-lbs) Min: Note: These characteristics are typical and may not apply to all connectors. Connector configurations may affect performance. Interface Dimensions. Filter By. Filter By. Category. F-Type Connectors 96 items; Applications. Waterproof IP Rated 1 item; Gender. Jack 66 items; Plug 30 items; Orientation. Right Angle 19 items;

®Temposonics TH SSI Data Sheet I 3 I TECHNICAL DATA See next page for “Electrical connection” 1/ With standard one shot of 16 μs 2/ With position magnet # 201 542-2 3/ If there is contact between the moving magnet including the magnet holder and the sensor rod, make sure that the maximum speed of the moving magnet is ≤ 1 m/s (Safety requirement due to ESD [Electro Static Discharge])

PCB LOAD & TORQUE, INC. 24350 Indoplex Circle, Farmington Hills, MI 48335 USA Phone: 866-684-7107 Fax: 716-684-0987 Email: [email protected] www.pcbloadtorque.com

µµµµs Acceleration (G) 0 50 100 150 200 250 300-20000-10000 0 10000 20000 30000 40000 50000 Quartz accel PCB Endevco Figure 5. Comparison at 40kG. Wideband data shows ~40kG amplitude was still below stop

1/24/17 3 conditions to arise, and requires that its employees, officers, directors, subcontractors, suppliers and agents actively seek to mitigate and prevent this risk by implementing the

2 07/2012 Produktblatt der FEP Fahrzeugelektrik Pirna GmbH FAHRZEUGSTECKVERBINDER CONNECTORS FOR VEHICLES Radial gedichtete Flachkontaktgehäuse mit Sekundärverriegelung und zusätzlichem Quittierelement

1.43 (-15 dB) Max: Insulation Resistance : 5000 MΩ Min: Center Contact Resistance: 1.5 mΩ Min: Outer Contact Resistance: 0.2 mΩ Min: RF Leakage: 55 dB Max @ 3 GHz: Insertion Loss: 0.2 dB Max @ 3 GHz: Power Handling: 316 W Max @ 1 GHz @ 25ºC: Environmental. Items; Temperature Range: −65°C to +165°C:

127(6 81/(66 27+(5:,6( 63(&,),(' 0$7(5,$/ 7+(5023/$67,& 5r+6 &203/,$17 &2/25 :+,7( &217$&7 6,=( ),76 $ 6(5,(6 57 6(5,(6 &211(&7256

Page 4 Toggle Bolt > 3200 lb. Pull‐through force Weldnut > 6000 lb. Pull‐through force 4.a. How much stability is required?

Amphenol 12G / 24G Mini-SAS HD product is the next generation SAS storage interface addressing multichannel bandwidth requirements of 12Gb/s or 24Gb/s while meeting or exceeding SAS 3.0/4.0 specifications. The Mini-SAS HD product provides greater port den

±1°C from 15-30°C (±1.8°F from 59 to 86°F) Power Supply Requirements 18-30 VAC RMS, 50/60 Hz, or 18 to 42 VDC, polarity protected *AHRAE — regulation 62 states maximum indoor CO 2 level of 1000 ppm Power Consumption Typical 0.7 W at nominal voltage of 24V AC RMS Temperature Dependence 0.2% FS per °C (±0.11% per °F) Stability

ICP FORCE SENSOR OPERATION MANUAL 2 . Figure 3 - Series 200 ICP Impact Sensor. Polyimide film tape covers the cap surface to reduce high frequency ringing associated with metal-to-metal impacts.

Battery Chamber — — — 13”x28”x20” 13”x26”x15.5” 15”x26”x20” 15”x26”x20” 7”x26”x16.5” DAS / Venue Many different CUBE enclosures provide critical equipment and battery protection for Distributed Antenna Systems (DAS) installed