All Products
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks.
![Product BarKlip® BK300 Connector](https://staph.blob.core.windows.net/images-products/BarKlipR-BK300-Connector-6838.png)
BarKlip® BK300 Connector
The BarKlip® BK300 connector features 14 independent conducting beams that maintain contact with the mating busbar. BK300's contacts are plated with Amphenol's proprietary silver-based AGT® plating technology to further reduce contact resistance and eliminate fretting corrosion commonly found in tin-plated connectors.
![Product BarKlip® XP Connectors](https://staph.blob.core.windows.net/images-products/BarKlipR-XP-Connectors-3331.png)
BarKlip® XP Connectors
HIGH POWER AND LOW RESISTANCE BUSBAR CONNECTOR
Amphenol's BarKlip® XP connectors feature independent points of contact that provide overall lower resistance and greater overall efficiency. BarKlip® XP series is capable of distributing anywhere from 150 to 1000A of power to busbar power distribution applications.
![Product BarKlip® XP Connectors for EV Charging](https://staph.blob.core.windows.net/images-products/BarKlipR-XP-Connectors-for-EV-Charging-4467.png)
BarKlip® XP Connectors for EV Charging
HIGH POWER AND LOW RESISTANCE BUSBAR CONNECTOR FOR EV CHARGING STATIONS
Amphenol ICC's BarKlip® XP connectors feature independent points of contact that provide overall lower resistance and greater overall efficiency. BarKlip® XP series is capable of distributing anywhere from 150 to 1000A of power to busbar power distribution applications.
![Product Barrier Terminal Block](https://staph.blob.core.windows.net/images-products/barrier-terminal-block-Thumbnail.png)
Barrier Terminal Block
In structure, they comprise panel feed-through type, baffle type, and pluggable type, and can connect all kinds of conducting wires whose cross-sections are 0.32mm² to 53.5mm². The spacing between 7.62mm and 11mm can be selected. It can provide covered or uncovered styles. Product design in line with IEC60998, UL1059, CSA C22.2 No.158, and other international standards.
![Product Barrier Terminal Blocks](https://staph.blob.core.windows.net/images-products/barrier-terminal-blocks-4793.png)
Barrier Terminal Blocks
EBY offers a complete selection of industry standard terminal blocks and barrier strips - which may be customized to your needs - support a broad range of wire-to-board and wire-to-wire configurations.
For bare or terminated wires
Wire-to-board or wire-to-wire feed-through styles
No special tools required for installation
Easy field termination
Flexible design options - contact us!
![Product BATSOK](https://staph.blob.core.windows.net/images-products/batsok-3863.png)
BATSOK
HV/HP connector for applications >60V. The connectors can be flexible or rigid and are available in various cross-sections. Also known as battery module connector.
![Product Battery and Miscellaneous Cables](https://staph.blob.core.windows.net/images-products/battery-and-miscellaneous-cables-9770.png)
Battery and Miscellaneous Cables
Unlimited Services manufactures heavy-gauge battery and miscellaneous cables, often kitted with wire harnesses, for on-road and off-road specialty vehicles and military ground vehicles. Production volumes range from low to medium volume. Production resources are in the U.S. Our heavy cable processing capability and engineering design review delivers quality, with ITAR certification and DoD MLAs.
![Product Battery Backup Unit Cabinets](https://staph.blob.core.windows.net/images-products/battery-backup-unit-cabinets-Thumbnail.png)
Battery Backup Unit Cabinets
Battery Backup Unit Cabinets are pad mount enclosures designed to provide superior environmental protection of Ni-Cd and VRLA battery strings and are ideally suited for cell sites and other outdoor environments where a large amount of battery backup is required.
![Product Battery Connectors](https://staph.blob.core.windows.net/images-products/Battery-Connectors-8955.png)
Battery Connectors
Amphenol’s comprehensive offering of battery connectors for mobile phones comes in single and multi-contact versions with straight and right-angle mountings. They feature stamp and form contacts with additional solder tags for high reliability and conductivity. Amphenol offers right angle and direct compression type, Wire to Board, board to board, blade type and float, or SMT versions.
![Product Battery Structural Components](https://staph.blob.core.windows.net/images-products/battery-structural-components-4845.png)
Battery Structural Components
Modern high-voltage battery systems consist of many individual cells. These can be held together by cell connectors in the correct grid and thus safely contacted. Power rails for transferring the energy of the individual cells inside or outside the battery are also part of our portfolio.
![Product Below Grade HDPE Handhole Enclosures](https://staph.blob.core.windows.net/images-products/below-grade-hdpe-handhole-enclosures-7446.png)
Below Grade HDPE Handhole Enclosures
Charles Below Grade Enclosures (CBGE) are lightweight, molded HDPE handholes available in five rectangular and two round sizes. Designed for light-duty placements (parkway/greenbelt applications), these ANSI/SCTE rated below-grade enclosures store fiber optic and copper cable slack, meters, sealed cases, control valves, ground rods, signal controls, and various other equipment.
![Product BergStak HS™ 0.50mm Mezzanine Connector](https://staph.blob.core.windows.net/images-products/BergStak-HST-0-50mm-Mezzanine-Connector-2974.png)
BergStak HS™ 0.50mm Mezzanine Connector
FLEXIBLE SOLUTION FOR HIGH-SPEED APPLICATIONS
BergStak HS™ 0.50mm connector is a flexible solution designed for high speed and high density, parallel board-to-board applications with various heights in different sizes.
The BergStak HS™ 0.50mm connector series meets the new 25Gb/s and 32Gb/s performance requirements.
![Product BergStak HS™ 0.80mm Board-to-Board Connector](https://staph.blob.core.windows.net/images-products/BergStak-HST-0-80mm-Board-to-Board-Connector-2592.png)
BergStak HS™ 0.80mm Board-to-Board Connector
FLEXIBLE SOLUTION FOR HIGH-SPEED APPLICATION
FCI Basics BergStak HS™ connector family is known for its fast data transmission, high signal quality, and time-proven reliability under extended periods of application. BergStak HS™ 0.80mm connector family with 0.80mm pitch enables high-speed data applications with up to PCIe® Gen 5 32Gb/s.
![Product BergStak+™ 0.80mm Mezzanine Connector](https://staph.blob.core.windows.net/images-products/BergStakPlusT-0-80mm-Mezzanine-Connector-2198.png)
BergStak+™ 0.80mm Mezzanine Connector
BergStak+™ 0.80mm is designed to be the next generation PCIe 4.0 compliant mezzanine connector system. It is compatible with the existing BergStak® 0.80mm product recommended by the OCP. It guarantees to support up to 16Gb/s performance. Customers can upgrade its board-to-board performance from PCIe 3.0 to PCIe 4.0 while leveraging BergStak+™'s backward compatibility and same footprint feature.
![Product BergStak® 0.40mm Self-Alignment Board-to-Board Connector](https://staph.blob.core.windows.net/images-products/BergStakR-0-40mm-Self-Alignment-Board-to-Board-Connector-5569.png)
BergStak® 0.40mm Self-Alignment Board-to-Board Connector
FCI Basics BergStak® 0.40mm self-alignment connectors come with a stack height of 3.50mm and 30 positions extendable up to 10 to 60 positions with 10 positions incremental. It has a unique self-alignment feature that supports blind mating, ensuring a reliable connection. The USCAR-2 compliant connector is also ideal for the automotive market.
![Product BergStak® 0.50mm Mezzanine Connector](https://staph.blob.core.windows.net/images-products/BergStakR-0-50mm-Mezzanine-Connector-2206.png)
BergStak® 0.50mm Mezzanine Connector
The BergStak® product range is expanded to include 0.5mm mezzanine connectors. Available in 3mm to 6mm stack height options in 0.5mm increments, this connector is offered in 10 to 60 positions in 10 position increments. Designed with scoop-proof housing the terminals are protected from damage when parts are mated.
![Product BergStak® 0.50mm Self-Alignment Board-to-Board Connector](https://staph.blob.core.windows.net/images-products/BergStakR-0-50mm-Self-Alignment-Board-to-Board-Connector-4770.png)
BergStak® 0.50mm Self-Alignment Board-to-Board Connector
FINE PITCH SOLUTION WITH SELF-ALIGNMENT FEATURE
FCI Basics BergStak® 0.50mm self-alignment connectors come with a stack height of 3mm and 50 positions extendable across 20 to 60 positions in increments of 10. It has a unique self-alignment feature that supports blind mating.
![Product BergStak® 0.80mm Pitch](https://staph.blob.core.windows.net/images-products/BergStakR-0-80mm-Pitch-7030.png)
BergStak® 0.80mm Pitch
FLEXIBLE SOLUTION FOR HIGH-DENSITY APPLICATIONS
FCI Basics BergStak® 0.8mm is a flexible solution designed for high speed and high density, parallel board-to-board connector system with 16 PCB stack heights in 9 sizes up to 200 positions.
![Product BergStak® 0.80mm Shielded Board-to-Board Connector](https://staph.blob.core.windows.net/images-products/BergStakR-0-80mm-Shielded-Board-to-Board-Connector-3286.png)
BergStak® 0.80mm Shielded Board-to-Board Connector
FCI Basics BergStak® 0.80mm connector family is known for its fast data transmission, high signal quality, and time-proven reliability under extended periods of application. Bergstak® shielded connector with 0.80mm pitch supports high-speed data applications up to 10Gb/s.
![Product BergStak® FX10 0.50mm Board-to-Board Connector](https://staph.blob.core.windows.net/images-products/BergStakR-FX10-0-50mm-Board-to-Board-Connector-6011.png)
BergStak® FX10 0.50mm Board-to-Board Connector
FCI Basics BergStak® product range is expanded to include a 0.50 mm BergStak® FX10 board-to-board connector known for its fast data transmission and high signal quality. This connector is offered in 144 positions and is available in 4.30mm and 6.00mm stack height options.
BergStak® FX10 supports speed performance up to 15Gb/s+ and is available in vertical SMT configuration.