All Products

The AUAV Series is a dual-sensor solution for UAVs, combining a high-accuracy differential pressure sensor (airspeed) and a barometric pressure sensor (altitude) in one compact package. Dual ASIC compensation enables 18-bit precision for simultaneous airspeed and altitude measurement in drone and aerospace applications.

Amphenol 164 series connectors are water-resistant, polarized, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ three-point bayonet coupling for quick disconnect and self-wipe contact. Connector meets the requirement of MIL & Qualified to MIL-DTL-55116 standard.

The Amphenol audio series covers a wide range of entertainment applications and can be used in a wide variety of applications. In this series, you will find all the necessary products for the entertainment sector. High-quality audio performance and high-speed data transmission allow almost limitless flexibility for the customer.

Amphenol's Audio Jacks are widely used in mobile phone applications. These connectors are available in different configurations, e.g. compressed type or for SMT solderable versions, and fully customized to the application requirements.

The AUTOMATE Mini-FAKRA connector series, the latest in automotive interconnect technology, is a space-conscious, high-performance interface central to the next generation of vehicle applications.

Amphenol's independent amplifier box can be applied to AM, FM, and DAB frequency bands. The amplifier usually matches a corresponding antenna. It comes with a standard Fakra connector and a standard MQS connector.

Customer and application-specific cable assemblies for all electric functions in a vehicle. Harness assemblies including standard connectors and customized interconnect solutions.

The connector housings for accommodating flat contacts of various sizes are used for the electrical connection between the wiring harness and the various units in the car. There are 1- to 14-pole versions in sealed or unsealed design.

Amphenol's independent AM/FM antenna is constructed with FPC. It has double sided adhesive tape on the back for flexible installation. Customized harness length is overmolded onto the FPC with a standard Fakra connector.

Amphenol's independent GNSS box includes an L1 band (1559MHz-1610MHz) patch antenna and a corresponding LNA. A customized harness length can be applied with a standard Fakra connector. It is applied in a vehicle for navigation.

Amphenol's independent dual-band GNSS box includes L1+L5 patch antenna and a corresponding LNA. A customized harness length can be applied with a standard Fakra connector. It is applied in a vehicle for navigation.

Amphenol's PCIe® M.2 Gen 4 connectors provide 67 contacts on 0.50mm pitch and signal transmission speed of 16Gb/s. It is designed for PCIe® 4.0, USB 3.0/3.1 and SATA 3.0 applications, and USCAR compliant, making it suitable for automotive applications. PCIe® M.2 connectors also support higher data rate transmission with both single and double-sided modules.

EXTEND DIFFERENTIAL SIGNALING TO 32GT/S FOR NEXT-GENERATION SYSTEMS PCIe® Gen 5 straddle mount connectors outperform the industry standards with higher speed along with complying to USCAR. The optimized series supports backwards mating and is footprint compatible with PCIe® 4/3/2/1.

Amphenol's independent HF antenna box consists of a GNSS antenna and a V2V antenna. An L1 band GNSS antenna plus the amplifier are integrated. This box is applied on vehicles with glass sunroofs. Customized harness lengths with standard Fakra connectors are applied.

Automotive HF / RF components and harness assemblies to connect antennas, cameras, radio, infotainment, and connectivity modules. All commonly used standard interfaces like FAKRA GEN3 / GEN4 and MiniCoax / Mini FAKRA are available.

Automotive multi pole harness connectors - sealed and unsealed for low voltage applications. 1 pin to 43 pin connector including TPA, CPA, Seal, for all major terminal systems. Flat terminal size range from 0.5 / 0.64 / 1.2 / 1.5 / 2.8 / 4.8 / 6.3 / 9.5 mm.

Amphenol's fiber glass mast antenna is widely used in pickup trucks. The antenna covers AM, FM and DAB frequency bands. It has 2 versions of length: 595mm and 685 mm. A customized thread can be applied for installation.

Amphenol's standard Sharkfin consists of AM/FM antenna, 2-3-4-5G antenna, dual band GNSS antenna (high precision navigation and SDARS antenna. Waterproof class IP6K9K. Optional WiFi and V2X antennas can also be added accordingly. Customized harness lengths with standard Fakra connectors are applied.

The AXC 50 is a versatile 50A / UL 1977 rated 600V power connector designed for reliable battery and power connections. Boasting quick connect/disconnect, color-coded keyed housings, stability and easeof-use are at the forefront. Silver-plated, crimp contacts cater to different AWGs, ensuring a wide accommodation range. UL certification strengthens its safety claim.

The revolutionary mini accessories with 3 entrances, pre-filled with gel, and suitable for submersible installations(IPX8). Designed in 3 dimensions to rapidly insulate and seal the most commonly used connectors.