Search Results for 10-350349-243

The ENDEVCO Model 65 is available in two sensitivity values, 10 mV/g and 100 mV/g. See Section 9.0 for additional model definition detail. The following performance specifications conform to ISA-RP-37.2 (1964) and are typical values, referenced at +75°F (+24°C), 4 mA, and 100 Hz, unless otherwise noted. Calibration data, traceable

AIRMAR provides information in this cross-reference as a guideline for choosing the correct transducer for your specific fishfinder. Our OEM customers frequently change their models, software versions and plug configuration, which may not be reflected in this cross-reference guide.

§ Thermal Shock: 10 cycles between -55°C to +85°C. per EIA 364-32, test condition I § Mixed Flow Gas: Expose ½ samples unmated for 7 days and then mated for 7 additional days; the other ½ samples are exposed mated for 14 days. per EIA 364-65, class II Exposed mated for 14 days. per EIA 364-65, class II A SPECIFICATIONS

(2 mV/V x 10)/1,000) or 0.02 mV/lb. 2. A 1,000 pound capacity load cell used with a signal conditioner scaled for a 10 volts (10,000 mV) output at 1,000 pounds: (10,000 mV/1000) or 10 mV/pound The value of a strain gage signal conditioner becomes very clear when you consider the difference between a sensitivity of 0.02 mV/pound or 10 mV/pound.

Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10-2023 Machined Contacts, Sockets & Pins Part Number DescriptionSize AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 1614 Machined AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT60-215-16141 Male Contact - Pin, Nickel ...

7 DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. High Performance Positronic Industries D-sub connectpositronic.com SND SERIES MILITARY / SPACE FLIGHT QUALITY STANDARD DENSITY FIXED OR REMOVABLE CONTACTS

Using our high-performance shielded twin-axial SKEWCLEAR wires, SFP passive copper cable assemblies offer both low cross-talk pair-to-pair skew. These cable assemblies are compliant to SFF-8402 MSA, SFF-8431/8432, SFF-8024, 25 Gigabit-Ethernet (25 GBASE-CU), Gigabit-Ethernet (IEEE 802.3by) and 32G Fiber Channel (32GFC Gen 6) standards, and can support a majority of SFP28-based equipment in the ...

Thermo-Trex® Silicone Fiberglass Ultra-Sleeve High Temperature Sleeving (With & Without Closure) is a protective sleeve that is ideal for harsh environments of flash heat or flame, moisture, chemicals or mechanical abuse.

Ensure secure connections with the Gemeco D00342H 10 Conductor In-line Splice. Designed for marine use, suitable for 18-22 AWG wires and .23"-.35" cables.

SMA Straight Jack Bulkhead Round Post 50 Ohm 132363-10 SMA Straight Solder Jack RG-405 0.086-inch Conformable Bulkhead 50 Ohm 901-9210-2 SMA Panel Mount Jack 4-Hole Flange 50 Ohm 0.036 Slot 132162-12

• Rated up to 350A per pin (10.3mm pin . diameter) • Flexible housing form-factor • Straight-exit and 90-degree cable solution. BergStak ® 0.80mm • High density applications. • Wide range of positions and stack heights. • Speed up to 16Gb/s. DensiStak™ • High density board to board. • EMI Shielding, Blind-mating feature ...

MS10A23S Socket Contact, Size 8, Silver Plated, Machined, Wire Range 3.0-6.0mm²,10-12 AWG. REQUEST A QUOTE. Browse Similar Items. Our Product Lines > ...

3425 Walden Avenue Depew, NY 14043. Sensorline SM 716.684.0001. [email protected] +1 800-828-8840

The probability of finding a nonsterile unit (Probability of Non-Sterile Unit, or Sterility Assurance Level SAL) must therefore be smaller (as mathematical value) than 10−6. The critical parameters that affect a successful Autoclave Validation / Steam Sterilization Validation are: Temperature; Pressure; Time; Saturated Steam; Air Removal ...

BNC Connectors. BNC connectors are ideal to terminate cables used with single-axis ICP accelerometers and vibration transmitters while BNC splices can be used with multi-axis or multi-output sensors.

Heavy-Duty, Multi-Pin, 13A, Thermoplastic Connectors. Available in 2, 3, 4, 6, 8, 12, 13 (Mixed), 15 (Mixed) and 18 position. Amphenol Sine Systems’ AT Series ...

Available now are 3 products with 2,3, or 4-way splits. Each model has the option of N type, 7/16 DIN and the new 4.3-10 connector. All Models are design and manufactured to focus on delivering best in class mechanical and electrical performance.

capabilities and are designed for use with 10-14AWG with size 12 contacts handling up to 25A. Also available in our BoardLock™, StructurePlus™, HYPERBUSS™ and PanelMate™ Series of connectors. In addition, all of our ATP Series™ connectors have been developed to be completely compatible with all other existing standard products ...

PDS-243-2. CTF-QUAD Call 800-678-0141 or visit us at www.amphenol-aerospace.com 2 How to Order CONTACT US: Jared Sibrava E-mail: [email protected] Phone: 607-643-1845 PDS-243-2 CTF-QUAD Mating Plug Connector Type Material Quadrax Contact Finish Shell Style Shell Size-Insert Arrangement

Contact Amphenol Canada for more information at 416-291-4401 • www.amphenolcanada.com 4 Download 2D drawings 3D models using our online congurator. Rectangular Modular Micro Amphenol is a global market leader in the design and manufacturing of electrical inter-connect technologies. The Rectangular Modular Micro connector product series is a compact, lightweight, simple and cost effective inter-