Search Results for 10-405996-163

According to EN 62305-1 (Test pulse 10/350 μs) Mechanical Characteristics Connector 7/16-DIN Female Construction Material Antenna Base Aluminium Shroud GRP Tube 53 mm (2.1 in) Diameter Radiating Element Brass Mounting Section Al. Tube 63.5 mm (2.5 in) Diameter x 350 mm (13.8 in) Length Dimensions (Length x Diameter) 1719 x 53 mm (67.7 x 2.1 in)

10 40 10137004-12JLF Left-guide Panel Mounted 10131981-101LF 4 16 10139215-101LF No Guide Screw Flange 10138449-001 6 8 48 10131762-12JLF Left-guide Panel Mounted 10133122-101LF 10 60 10131764-12JLF Left-guide Panel Mounted 10141681-101LF 8 48 10129470-102LF No Guide Direct Attach N/A 12 72 10131766-101LF No Guide Die Cast Frame 10137678-001

Title: NX303CB1B.prt : Author: ed Created Date: 10/23/2008 3:09:04 PM

AWG: 18-14 (0.75 - 2.5 mm2) 12-8 (4.0 - 10.0 mm2) Tools * The universal positioner is not included with the crimp tools and must be ordered separately. Extraction tool. Used for removal of 2.0mm (#14) contacts from inserts. 50-54931-2 Extraction tool. Used for removal of 3.6mm (#8) contacts from inserts. 50-54931-3

Burst Pressure 10 X Full Scale or 15,000 PSI whichever is less Operating Temperature Range -10° to 60°C (14° to 140°F) Storage Temperature Range -20° to 85°C (-4°to 185°F) Tested Conditions Humidity 250 Hours (40°C and 90% to 95% R.H. Pressure/Temperature Cycles > 1.8 million Cycles (0 to FS @ 8Hz and -20° to 85°C)

AmphenolAerospac e Call 800-678-0141 or visit us at www.amphenol-aerospace.com ASSEMBLY INSTRUCTIONS FOR AMPHENOL® 348 SERIES MIL-C-81511 CONNECTORS 10-801916 (L-2056) Revised Jan. 2011

6 Contact Us: 800-678-0141 • www.amphenol-aerospace.com 38999 III 38999 II 38999 I SJT Aquacon 2M 83723 26482 26500 Hermetic MIL-DTL-38999, Series I LJT, II JT, III TV Insert Availability and Identification Chart

R2 698-960 3-4 4.3-10 Female Y1 1710-2690 5-6 4.3-10 Female 1710-2690Y2 7-8 4.3-10 Female 1710-2690Y3 9-10 4.3-10 Female Y4 1710-2690 11-12 4.3-10 Female Diagram shown at right depicts the view from the front of the antenna. The illustration is not shown to scale. INTEGRATED RET PROPERTIES Supply Voltage Range 10-30 V DC

Amphenol is one of the leading manufacturers of Board to board connectors. Contact us today for Bergstak ® 0.8mm, Part Number 10159561-A00321RLF.

Environmental. Temperature Range:-55°C to 125°C Physical Shock: Typical to EIA-364-27 test condition C Vibration: Typical to EIA-364-28 Fluid Immersion: Typically tested to EIA-364-10 Salt Spray: Typically based on EIA/ECA-364-26 Humidity: Typically EIA-364-31 test method IV Durability: 1500 couplings minimum (in reference to connector couplings, not contacts)

General purpose load cells are designed for a multitude of applications across the automotive, aerospace, and industrial markets. The general purpose load cell, as the name implies, is designed to be utilitarian in nature.

VANNER POWER GROUP IQ SERIES - 6 - IQ SERIES OWNERS MANUAL 1.2 Specifications Figure 1 Specifications Model Number SPECIFICATIONS IQ12-2600 IQ24-2600 IQ12-3600 IQ24-3600 IQC12-2600 IQC24-2600 IQC12-3600 IQC24-3600

section a-a section b-b carrier strip id: 12-14 23.9±0.7 Ø4.8 Ø4.0 4.7 8.25 typ 16.5 0.4 6.7 5.7 5.0 4.7 Ø2.5 11.7±0.5 notes: unless otherwise specified 1. material: copper alloy

RF Connector F-Type Right Angle PCB Jack Through Hole Bulkhead Rear Mount 75 Ohm

THE USE OF DYNAMIC STRAIN SENSORS AND MEASUREMENTS ON THE GROUND VIBRATION TESTING OF AN F-16 AIRCRAFT Fabio L. M. dos Santos´ 1,2,3,∗, Bart Peeters1, Jan Debille1, Carmine Salzano4, Luiz Carlos S. Goes´ 2 and Wim Desmet 3 1Siemens Industry Software NV Interleuvenlaan 68, 3001 Leuven, Belgium

Temperature Range -10 to 122 °F -23 to 50 °C Temperature Response <0.10 %/°F <0.17 %/°C [1] Electrical Excitation Voltage 6.5 to 30 VDC 6.5 to 30 VDC Constant Current Excitation 0.3 to 10 mA 0.3 to 10 mA Output Impedance ≤ 500 Ohm ≤ 500 Ohm Output Bias Voltage 2.8 to 4.5 VDC 2.8 to 4.5 VDC Discharge Time Constant 1 to 3 sec 1 to 3 sec

10-405996-122 YES PLUG, SEALING, GROMMET N/A Per review of the materials & processes utilized in the manufacture of the above -listed PN, Amphenol Military - Aerospace Operations hereby acknowledges the referenced product is in conformity with Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on the restriction of ...

Custom Terminal Blocks. Complete Design Services - Tell us your requirements and EBY can design the efficient, economical component you need.. Manufacturing For You - With EBY's manufacturing network, we can offer quantities and delivery times at very competitive prices.. With CAD/CAE, Solid Modeling and Rapid Prototype Techniques, our engineers can bring your concepts to life in as little as ...

Created Date: 10/15/2001 4:54:16 PM

AC4306-10 Vented Spcl Unidirectional, East & West 2 2 * All model numbers also contain a 4-letter “suffix” which varies according to the application. For example, a complete model number for the AC4306-01 can be “AC4306-01-XEAC”, where: X - (the first letter) represents the dome type (standard metal for the 4300 series)