Search Results for gs-12-0928
GS-12-557 PRODUCT SPECIFICATION - amphenol-cs.com
NUMBER GS-12-557 TYPE PRODUCT SPECIFICATION TITLE PAGE REVISION Right Angle Type, Edge Card Connector 3 of 9 D AUTHORIZED BY DATE De-Feng Qin 2012-07-23
Power edge connector Vertical type - Amphenol CS
7.0 MECHANICAL CHARACTERISTICS. 7.1 Insertion/Withdrawal Force - The force to insert a receptacle connector and PCB Board shall not exceed 8.0 Kgf. The Withdrawal force shall not be less than 1.2 Kgf. The following details shall apply: Cross Head Speed – 25.4 mm per minute.
GS-12-1424 PRODUCT SPECIFICATION 0.8mm BergStak Lite Product ...
5.4.1 Recommend using solder paste thickness 0.15mm Min. 5.5 Design and Construction The connector shall be a multi-piece assembly having two rows of contacts with surface mount solder-tail terminations for installation on printed wiring board. 5.6 Rating. Voltage Rating. 100V AC. Current Rating. 0.5 A Max. Temperature Rating.
gs-20-0327 - Amphenol CS
GS-01-001 1.0 OBJECTIVE This specification provides information and requirements regarding customer application of Mini-SAS HD board connector for external applications. This specification is intended to provide general guidance for ... GS-12-651 • FCI PRODUCT CUSTOMER DRAWINGS: 10112626, 10112627, 10112628 • INDUSTRY SPECIFICATION: SFF-8644
APPLICATION SPECIFICATION GS-20-141 - Amphenol CS
Form E-3334 02/12/01 GS-01-001 4.0 DRAWINGS AND APPLICABLE DOCUMENTS • FCI PRODUCT SPECIFICATION GS-12-658 • FCI PRODUCT DRAWINGS Product drawings and FCI’s GS-12-658 Product Specification are available at www.fci.com In the event of a conflict between this application specification and the drawing, the drawing will take precedence.
NUMBER GS-12-445 PRODUCT SPECIFICATION
GS-01-001 eDOC - PDS: Rev :C PDM: Rev:B STATUS: Released Printed: Nov 22, 2010. NUMBER GS-12-445 TYPE PRODUCT SPECIFICATION TITLE PAGE REVISION Converged Metral HEADER – HM1 versions Straight and Right Angle PRESS-FIT 5 of 9 C AUTHORIZED BY DATE ARUN 16-02-2021 CLASSIFICATION UNRESTRICTED 7.0 ELECTRICAL CHARACTERISTICS
ExaMAX® 85Ω High Speed Backplane Connector System
ExaMAX® 85Ω backplane connector system meets industry specifications requiring higher bandwidth applications from 25Gb/s to 56Gb/s. The optimized connector design delivers superior signal integrity performance resulting in low crosstalk noise and low insertion loss while minimizing channel performance variation for every differential pair.
GS-20-033 APPLICATION SPECIFICATION - Amphenol CS
GS-01-001 Table 1: Connector Sizes and Stack Heights Board-to-Board Height*** Size Type 4.0mm 6.0mm 8.0mm 10.0mm 12.0mm 14.0mm 81 position 9x9 Plug 55714 0mm Receptacle 55715 4mm 100 position 10x10 Plug 84512 0mm Receptacle 84513 4mm 200 position 10x20 Plug 84516 84516 84516 84530 84530 84530
HIGH POWER CARD EDGE (HPCE ) MEZZANINE - Amphenol CS
• Product specification: GS-12-604 • Application specification:GS-20-128. APPROVALS AND CERTIFICATIONS • UL and CSA Approval: E66906 • TUV Approval: 090-1103488. PACKAGING • Soft Trays. TARGET MARKET/ APPLICATIONS • Data • AC/DC pluggable power supplies • Servers • Storage • Communications • AC/DC pluggable power supplies ...
GS-20-0399 Application Specification - Amphenol CS
1.0 OBJECTIVE. This specification provides information and requirements regarding customer application of Minitek Pwr3.0 crimp to wire connectors. This specification is intended to provide general guidance for application process development. It is recognized that no single application process will work under all customer scenarios and that ...
ExaMAX Connector System - Amphenol CS
8.4 Mixed Flowing Gas corrosion (MFG) – EIA 364-65, class IIA, 4-gas. Duration – 20 days. Temperature – 30°C. Humidity – 70%. Backplane and RAOH samples, backplane (VH or RAOH) connectors shall be exposed to gas mixture for 10 days, then mated to unexposed receptacles and exposed to gas for an additional 10 days.
fci connectors | Amphenol Global Search | Amphenol
FCI, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. FCI offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact
NUMBER GS-12-1317 PRODUCT SPECIFICATION - Amphenol CS
6.1 Connectors used on USB cables should meet the electrical, mechanical and environmental characteristics listed in USB standards, if not listed in the specification. For detail test procedure and requirements, please refer to USB, Micro-USB Cables and Connectors Specifications. 35N max. at a speed of 12.5mm per minute.
GS-12-1291 PRODUCT SPECIFICATION - Amphenol CS
NUMBER GS-12-1291 TYPE PRODUCT SPECIFICATION TITLE PAGE REVISION Minitek Pwr3.0 High Current Connectors 1 of 8 D AUTHORIZED BY DATE Mithun Paul 2021/05/19 CLASSIFICATION
Amphenol FCI gs-12-1380
6.2 Contact Resistance, Specified Current (Power contact) The contact resistance at a specified current shall not exceed 1.0mΩ initially or after any treatment and/or environmental exposure. Measurements shall be in accordance with EIA 364-06. The following details shall apply: a. Test Current – refer to section 6.5.
TABLE OF CONTENTS Section page no. - Amphenol CS
5.4.2 3mm pitch between adjacent columns. The 3mm pitch allows two differential pairs or four single-ended lines to be routed per PCB layer. For differential applications this assumes 0.20mm (0.008”) wide traces, a 0.20mm (0.008”) wide space between a pair of traces, and a pair-to-pair spacing of 0.45mm (0.018”).
GS-12-192 Rev K - Amphenol CS
TYPE PRODUCT SPECIFICATION NUMBER GS-12-192 TITLE PAGE REVISION 3 of 14 K AUTHORIZED BY DATE GIG-ARRAY® High Speed Mezzanine Connectors 15-40 mm Board to Board Bill Lin 23-Jul-10
NUMBER GS-12-1326 PRODUCT SPECIFICATION - Amphenol CS
The following details shall apply: Test Voltage - 500 volts DC. Electrification Time - 2 minutes, unless otherwise specified. Points of Measurement - Between adjacent contacts (and between contacts and other conductive surfaces, if applicable). 6.3 Dielectric Withstanding Voltage There shall be no evidence of arc-over, insulation breakdown, or ...
NUMBER TYPE GS-12-497 PRODUCT SPECIFICATION SD CARD CONNECTOR 1 of 8 G ...
Mated and unmated connector with cycles time about 45sec/cycle, see Figure 3. Number of cycles: 6 Relative humidity : 90~100 % Cycle period : 24 hours See FIG 2. With SD CARD mated. Begin dust concentration of 300 g/cm*cm*cm of chamber volume, flow rate =300 m/s and exposure time of 1 hr.
LEAD FREE PART NUMBER TERMINAL TYPE REFER DRAWING # 10159408
product specification: gs-12-002. 4. application specifications: bus-20-061. gs-20-001. ta-941. 6. diamond location peg are only existed on the both side. of the product. 10. all products will withstand exposure to 260%%dc for . 60 seconds in a convection. infar-red or vapor phase .