Search Results for gs-12-0928
NUMBER GS-12-1345 PRODUCT SPECIFICATION - Amphenol CS
The soldered surface shall be covered with a smooth solder coating with no more than small amounts of scattering imperfections such as pin-holes or un-wet or de-wet areas. Conform to IEC60068-2-58 7.Solder reflow method. Preheating: 150±10°C, 60~120sec Soldering: 235±5°C, 10±1 sec Number of reflow : 2. Para.
NUMBER GS-12-449 PRODUCT SPECIFICATION - Amphenol CS
Frequency : 10 to 500Hz, sweep vibration. Amplitude or acceleration amplitude : 0.75mm or 100m/s2 (10G) Sweep rate : 1octave/minute. Duration : 10cycles for each axis X, Y, Z (total 30cycles) 6.6. Humidity After the mated connector is exposed to a high humidity ambience in accordance with. IEC 60068-2-78 or JIS C 60068-2-78.
ExaMAX® 85Ω High Speed Backplane Connector System
ExaMAX® 85Ω backplane connector system meets industry specifications requiring higher bandwidth applications from 25Gb/s to 56Gb/s. The optimized connector design delivers superior signal integrity performance resulting in low crosstalk noise and low insertion loss while minimizing channel performance variation for every differential pair.
Conan 1.00mm Connector | Mezzanine Connectors - Amphenol CS
Amphenol's Conan ® 1.00mm is a mezzanine connector designed for industrial applications and harsh environments. Conan ® 1.00mm provides a mechanically secure, high-density electrical interface between parallel printed circuit boards. Its unique design with an audible 'click' sound enhances the security and ease of use.
product specifications gs-12-500 j - Amphenol CS
5.0 Requirements. 5.1 Qualification Connectors furnished under this specification shall be capable of meeting the qualification test requirements specified herein. 5.2 Material Contact: Copper Alloy or Stainless Steel. 5.3 Finish Contact Plating: Contact area: Plating shall be gold or GXT or Tin over Ni underplate.
10136689 | Amphenol Global Search | Amphenol
10117836 -001LF | Amphenol Global Search | Amphenol Search Results for 10117836 GS-12-0928 PRODUCT SPECIFICATION 4.1 FCI drawing 10117835, 10117836 4.2 FCI Product Shelf life-Storage-Solderability GS-20-060 4.3 FCI Package specification GS-14-2157 4.4 Universal Serial Bus 3.0 Specification 4.5 EIA-364: Electrical Connector/Socket Test ...
PDM: Rev:F Released - Amphenol CS
GS-12-002, Metral TM Connector System 4.0 GENERAL This document is meant to be an application guide. If information varies from that in the product drawings and specifications, the drawings and specifications take precedence. This document contains the following sections: Paragraph Title Page 1.0 Objective 1 2.0 Scope 1
GS-12-1125 PRODUCT SPECIFICATION - amphenol-cs.com
7.7 PCB hole Wall Damage: (Ref. GS-12-220) Cross –Section perpendicular to the board surface, and through the compliant section wear track. There shall be no copper cracks, separations between conductive interface, or laminate-to-copper separations. Reference GR-1217-CORE, November 1995, Section 5.1.7.
20-29s | Amphenol Global Search | Amphenol
20 General Managers delivering less than $500 million of sales; today, we have approximately 130 General Managers delivering $12.6 billion of sales. Yet, despite this significant expansion, the Amphenol General Manager of today is the same as the Amphenol General Manager of 35 years ago – an entrepreneurial leader who owns
ExaMAX® High Speed Backplane Connector System - Amphenol CS
§ Amphenol Product Specification: GS-12-1096 § Amphenol Packaging Specification: GS-20-0361 INDUSTRY SPECIFICATIONS Industry Specifications Speed Performance PCI Express (PCIe®) Gen 1/2/3/4/5 2.5Gb/s to 32Gb/s CEI-56G-MR-PAM4 Long Reach Interface 56Gb/s PAM4 Serial Attached SCSI (SAS) 1.1/2.1/3.0/4.0 3Gb/s to 24Gb/s
GS-20-033 APPLICATION SPECIFICATION - Amphenol CS
GS-01-001 Table 1: Connector Sizes and Stack Heights Board-to-Board Height*** Size Type 4.0mm 6.0mm 8.0mm 10.0mm 12.0mm 14.0mm 81 position 9x9 Plug 55714 0mm Receptacle 55715 4mm 100 position 10x10 Plug 84512 0mm Receptacle 84513 4mm 200 position 10x20 Plug 84516 84516 84516 84530 84530 84530
GS-12-1291 PRODUCT SPECIFICATION - Amphenol CS
NUMBER GS-12-1291 TYPE PRODUCT SPECIFICATION TITLE PAGE REVISION Minitek Pwr3.0 High Current Connectors 1 of 8 D AUTHORIZED BY DATE Mithun Paul 2021/05/19 CLASSIFICATION
NUMBER TYPE GS-12-497 PRODUCT SPECIFICATION SD CARD CONNECTOR 1 of 8 G ...
Mated and unmated connector with cycles time about 45sec/cycle, see Figure 3. Number of cycles: 6 Relative humidity : 90~100 % Cycle period : 24 hours See FIG 2. With SD CARD mated. Begin dust concentration of 300 g/cm*cm*cm of chamber volume, flow rate =300 m/s and exposure time of 1 hr.
AirMax VS Cable I/O Receptacle - Amphenol CS
- FCI AirMax VS Connector System, press-fit products GS-12-239 3.2 Other Standards and Specifications - UL94V-O: Test for Flammability of Plastic Materials in Devices and Appliances - EIA 364: Electrical Connector/Socket Test Procedures Including Environmental Classifications - GR-1217-CORE: Telcordia Specification “Generic Requirements for ...
61729-0010BLF | USB 2.0 | Amphenol
Product Specification - Series B - GS-12-093 Product Presentation Overview Product & Price Distributor Stock Check Symbol, Footprint & 3D Related Parts Part Specification Detail 3D View
OBJECTIVE - Amphenol CS
GS-01-001 2 Applicable documents 2.1 FCI Specifications. ¾ Product customer drawings "10044471" ,” 10076181” and "10044473" ¾ GS-12-305 : Cable Specification for DENSI-SHIELD TM IO connector ¾ GS-20-047 : Application guide DENSI-SHIELD TM IO cable connector ¾ GS-20-048 : Application guide DENSI-SHIELD TM IO board connector
20-29s | Amphenol Global Search | Amphenol
A1 RELEASE NEW DRAWING 19/AUG/20 IAN OF: SH: REV: DWG NO: TITLE: REV DESCRIPTION DATE REVISIONS ECO BY APPR 1 1 A1 AHDP04-18-20SN-SRA RECEPT, 18 SZ, 20 SOCKET, REVERSE ARRANGEMENT, NORMAL SEAL, SRA,DURAMATE AHDP SERIES 44724 Morley Drive Clinton Township, MI 48036 Sine Systems - www.amphenol-sine.com Amphenol
10136689-002LF | PwrMAX® | Amphenol
Environmental Compliance. Drawing. Product Specification - GS-12-1314. App Specification.
Microsoft Word - gs-12-390_a.doc - Amphenol Connectors
GS-12-390 TITLE PAGE REV. PCI EXPRESSTM SMT TYPE CONNECTOR 3 of 10 A AUTHORIZED BY DATE Richard Chiu 01/24/’07 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI. No part of the information shown on the document may be used in any way or disclosed to others without the written consent of FCI.
NUMBER GS-12-1246 PRODUCT SPECIFICATION - Amphenol CS
number gs-12-1246 type product specification title page revision twinblade™ power io 4 of 11 b authorized by date weller luo 02-04-2015 classification