Search Results for nitrogen gas properties high temperature

profile used for these tests is shown below in Figure 2. The max temperature of the profile is quite a bit higher at 250°C because there are other objects in the oven soaking up heat, so the board and the solder don’t see that max temperature. Figure 2: Sn96 Reflow oven temperature profile

with high-temperature resin and 1µin gold plating in contact and tail. It supports up to 50 mating cycles. Suitable for mid-end applications, EconoStik ™ 2.54mm can be used in various board-to-board applications such as industrial control, test equipment, metering, POS machines, set-top box, surveillance equipment, and vending machines.

KAYE HEADQUARTERS. Amphenol Advanced Sensors Germany GmbH Sinsheimer Strasse 6 D-75179 Pforzheim. T +49 (0) 7231-14 335 0 F +49 (0) 7231-14335 29 kaye-ccpf@amphenol-sensors.com

The High Power Contacts allow for greater current carrying capacity, or amperage, and are able to withstand higher temperatures in the same sizes as current Mil-Spec style ... 25 amps. 3.2 operating temperature: -55°c to +125°c finish to be. or better 0.13 recommended panel cutout. view from components side of pcb. 3.3 dielectric withstanding ...

1. High end server 2. Switch 3. Router 4. Base station Features and Benefits. 1. Support cable to board application: 1.0mm PCB card thickness 2. 16 channels(16X) can be expanded to 20 channels when sidebands are used with high speed signal pairs 3. Small size design with great robustness : pitch 0.6mm connector and max 25N wrenching test 4.

Quick-Connex ® M12 DC Micro High Temperature Chem-Gard® Cordsets make the replacement of electrical and electronic control devices quick and simple. Cordsets are built with our Chem-Gard® 200°C Cable providing superior resistance to chemicals and high heat and abrasion protection in harsh industrial conditions.. The Chem-Gard® 200°C cable ...

requirement reflects the high volumes of these applications. All units are factory calibrated to measure CO 2 concentration levels up to 5000ppm, while maintaining accuracy across the range. T6715 The new T6715 is the smallest most accurate dual channel CO 2 sensor available on the market today.

General High Sensitivity DC Accelerometer Terms Excitation- + 10 V dc typical. Sensitivity- mV/g ZMO Zero Measurand Output (mV output with no acceleration applied) TSS- Thermal Sensitivity Shift (sensitivity variation due to temperature change) TZS- Thermal Zero Shift (ZMO variation due to temperature change)

Model 740M04:ICP® piezoelectric strain sensor, titanium hsg, 900 peak micro strain, 10-ft integral cable to 10-32 plug (EB)

Email: tech@amphenol-aio.com Europe: Amphenol Industrial Operations Europe Via Barbaiana 5 1-20020 Lainate (MI) Italy Tel: +39 02 93254.204 Fax: +39 02 93254.444 Email: info@amphenol-aio.com Middle East: Amphenol Middle East Enterprises FZE Office C-37 PO Box 21107 Ajman Free Zone, UAE Tel: +9 716-7422494 Fax: +9 716-7422941

June 20, 2023 DEPEW, NY - - PCB Piezotronics (PCB®) is introducing our new Endevco Model 74-2K triaxial piezoresistive accelerometer. It is an extension of our Endevco Model 74 line, which already includes 74-20K and 74-60K. The Endevco Model 74 Triaxial Piezoresistive Accelerometer has gas damping internal to the MEMS sensing element to attenuate resonance in a shock environment and provide ...

– Long term reliability at high temperatures – Overload protection – ESD protection – Hermetic sealing – High temperature sealed connectors – Teflon® cabling rated to 200°C • Sensor recommendations – Industrial sensors: 793-6, 797-6 – Sealed connectors: R6QI (IP68), R6W (IP67) – J9T2A cables, shielded twisted pair 4

• Low cost, solid state temperature sensor • Point matched at 77°F (25°C) to ±5% or ±10% • Suitable for use over range of -112°F to 302°F (–80°C to 150°C) • High sensitivity greater than –4%/°C at 77°F (25°C) • Suitable for temperature measurement, control and compensation

Amphenol offers high-performing, low-resistance Busbar connectors with designs to conveniently distribute power between busbars, cables, and circuit boards. ... connector configurations with multiple power contacts are rated at 30A per power contact as tested for 30°C temperature rise in still air.

sensor die also features high sensitivity, excellent overload capability and small temperature hysteresis over a wide temperature range. The product is 100% visually inspected and electrically probed. Samples from each wafer are tested for resistance, sensitivity, linearity, offset, temperature coefficients and hysteresis. Amphenol Advanced Sensors

Alternative Montagehalterung: 0900912/00, 0302032/68, or 0300064/00 + U-Bolts to match mounting pipe diameter (Ordered Separately)

sensor die also features high sensitivity, excellent overload capability and small temperature hysteresis over a wide temperature range. The product is 100% visually inspected and electrically probed. Samples from each wafer are tested for resistance, sensitivity, linearity, offset, temperature coefficients and hysteresis. Amphenol Advanced Sensors

High speed data transmission connection systems have traditionally been implemented into commercialapplications with little regard to high vibration, high temperature and overall harsh environment demands. With the increased implementation of these high speed Datalink connection systems into more heavy duty / harsh environment

c10-613362-116 | Amphenol Global Search | Amphenol C10-752508-Z2P - Amphenol Search Results for c10. Our wide array of electrical and electronic connectors come in multiple form factors and are designed to meet the latest market needs including high power, high speeds, size and weight reduction, EMI shielding, hermeticity, high pressure and ...

Mini Cool Edge is a 0.60mm high density, high-speed card edge connector for new generation small form factor system. The Telaire® T6743 is an automotive-qualified CO2 sensor for in-cabin applications. Ventilate the cabin space providing automatic fresh air, aiding driver alertness.