Search Results for scsi-3

TEST & MEASUREMENT SENSORS AND ... - PCB

property of Amphenol corp. (2) must be returned upon requiest; and (3) arre confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the funishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is

10 Hz to 20 kHz ± 0.3 dB With respect to level at 250 Hz Self Generated Noise (Typical) Z-weighted A-weighted C-weighted Electronic 27 dB (22 µV) 8 dB (2.5 µV) 14 dB (5.0 µV)

± 3 dB 1.0 - 5,000 Hz 0.5 - 10,000 Hz Resonance frequency, nominal 22 kHz Transverse sensitivity, max 5% of axial Temperature response: –25°C +150°C –10% +15% Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g:

I2I Temposonics® MH-Series MS Analog/Digital Data Sheet 1. Product description and technology Temposonics® sensors can be used in versatile mobile machines without any restriction and replace contact-based linear sensors like potentio- meters. Highly dynamic systems are controlled safely by means of Temposonics® sensors, thus enhancing the productivity, availability and qua-

Iguana Sealed 38999 Series 3 for PCD Application; Stingray. Stingray 360 Blind Mate Magnetic Connector; Raptor. Raptor High Voltage High Altitude Interconnect; Rhino. Rhino High Power 38999 Derivative Connectors; Databus. Databus High Density MIL-STD-1553B Data Transmission Connectors; Fibre Optic. Fibre Optic High Speed Data Interconnect ...

Years Experience: 3 - 5 years or relevant experience Skills: Ability to provide expertise in resolving complex customer issues Thorough understanding of standard customer service concepts, practices and procedures Strong attention to detail, highly organized and ability to multitask

3.Connect the sensor very carefully and pay attention to the polarity of connections and power supply. 4.Use only approved power supplies. 5.It is indispensable to ensure that the specified permissible limit values of the sensor for operating voltage, environmental conditions, etc. are met. 6.Check the function of the sensor regularly and ...

3 - 5,000 Hz 1 - 9,000 Hz 0.5 - 14,000 Hz Resonance frequency, nominal 30 kHz Transverse sensitivity, max 5% of axial Temperature response: –25°C +150°C –10% +15% Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g:

3. specifications: 3.1 current rating: 7.5 amps 3.2 operating temperature: -55°c to +125°c 3.3 dielectric withstanding voltage: less than 2 milliamps current leakage @ 1500 volts ac. 3.4 insulation resistance: 1000 megohms min @ 25°c. 3.5 moisture resistance: ip67 ( mated condition ) 3.6 mating cycle durability: 100 cycles 3.7 rohs compliant 4.

RF Connector BNC Straight Crimp Jack RG-59 RG-62 50 Ohm. Body Finish: Nickel: Body Material: Brass: Cable Type (Terminates to) RG-59, RG-62, Belden 8221, Belden 8241, Belden 9169, Belden 9204, Belden 9228, Canare LV-61S

0.150 Inches (3.81 mm) Size Category: Miniature: Temp (Max Degrees Celsius) 165: Temp (Min Degrees Celsius)-65: Termination Style: PCB - Through Hole: You May also be Interested in. BNC Right Angle PCB Jack Through Hole Bulkhead Rear Mount 50 Ohm Isolated 031-6575.

アンフェノール社は世界でトップクラスのインターコネクト製品メーカーとして、電気、同軸、光コネクタをはじめ、センサ、アンテナ、ケーブル等の設計、製造、販売を行っています。

Photo 3 A silicone rubber coating approximately 0.010 inch (0.25 mm) thick has also been proven effective in many applications. General Electric RTV type 106 is recommended (PCB Model 065A67). Apply the rubber coating to the surface of the diaphragm and allow it to cure in accordance with the manufacturer’s instructions. 3.0 OPERATION

The Matrix MIL-DTL-5015 is a crimp, rear-release high power connector that provides an improved alternative to the older MIL-C-5015 solder type.

3-PIECE CRIMP PLUGS Amphenol Connector Cable Hex Crimp Data Stripping Dimensions, inches (mm) Number Type RG-/U Cavity for Cavity for Die Set for CTL Series Contact Outer Ferrule Tool 227-944* Tool Number ab c 36650-1003 BNC Plug Belden 82907, 88240

MTS Sensors R-Series Model RS Temposonics® Linear-Position Sensors - IP68/IP69K Housing 3 Product Data Sheet, Document Part No.: 551251, Revision A 10/11 Model RS rod-style sensor dimension reference The Temposonics R-Series rod-style sensor (Model RS) offers modular construction, flexible mounting configurations, and easy installation.

1/3 octave from 10 to 1 kHz <0.1 mg <0.02 mg Output impedance, max 200 Ω Power requirement: Voltage source Current regulating diode 18 - 30 VDC 10 mA ± 2.5% Bias output voltage, nominal 9.5 VDC Grounding case isolated, case connected to outer shield Base strain sensitivity, max <0.75 g for 250 μstrain Acoustic sensitivity 100 dB SPL 1/3 ...

3-PIECE CRIMP PLUGS Amphenol Connector Cable Hex Crimp Data Stripping Dimensions, inches (mm) Number Type RG-/U Cavity for Cavity for Die Set for CTL Series Contact Outer Ferrule Tool 227-944* Tool Number ab c 36650-1003 BNC Plug Belden 82907, 88240

Telect’s nrg600BT10-C 600A dual-feed 10/10 circuit breaker/TFD Load Center features -48V operating voltage to fit in legacy and “next-gen” network applications, with advanced circuit level monitoring features engineered into a compact 2RU footprint. Each of the dual feeds contains ten positions for either bullet-style breakers or TFD fuse holders.