Board-Level Connectors

The BTFW Series is a floating board-to-board connector system consisting of plugs and receptacles with two rows of staggered contacts on 1.00mm (0.039in.) centerlines. This connector system is designed for applications that require high density, and high reliability interconnects with higher pin counts and surface mount termination, such as audio-video (AV) and navigation systems in automobiles.

FCI Basics the Clincher™ 2.54mm pitch connector family includes single-row pin-and-receptacle connectors designed for termination to flat flexible circuitry. All receptacle connectors use the same customer-preferred and patented Clincher™ contact and are ideal for applications where shock or vibration are concerns.

The ComboLock® Wire-to-Board connector's compact design for the limited space application needs carries power and signal requirements. The connector system has hybrid 1.00mm pitch signal and 3.00mm pitch power configuration with an active latching feature. The connector has a nominal current carrying capacity of 10A/pin max for power and 1.5A/pin max for signal. Power wire sizes from 26 to 18AWG

ComboStak® and PowerStak® are compact, hybrid (signal and power), and power board-to-board connectors. ComboStak® combines existing, BergStak® 0.8mm pitch signal pins with 2.00mm pitch power blades. PowerStak® is the power-only version. Both ComboStak® and PowerStak® provide high signal and current density with a wide range of stack heights.

COMPRESSION-TYPE SURFACE MOUNT CONNECTORS FOR HDD (HARD DISK DRIVE) Compression connectors are customizable single-piece solutions that facilitate read & write functions in traditional low-cost bulk-storage HDDs and helium HDDs.

Amphenol ICC's Conan® 1.00mm is a mezzanine connector designed for industrial applications and harsh environments. Conan® 1.00mm provides a mechanically secure, high-density electrical interface between parallel printed circuit boards. Its unique design with an audible 'click' sound enhances the security and ease of use. It has good mating performance, rugged design, and is under 70 positions.

Conan® Lite 1.00mm connectors come with a robust metal down feature that helps in establishing a reliable connection with the PCB in both parallel and perpendicular board-to-board applications. These connectors also feature an audible "click" sound ensuring mating in place. Conan® Lite vertical headers, receptacles, and right-angle headers are offered in 9-69 positions.

FCI Basics Cross-Mate™ series is a 2.00mm pitch wire-to-board system that offers a compact design and active latching for applications requiring good mating retention. The Terminal-Position-Assurance (TPA) guarantee that the contact is properly mounted into the cable housing eliminating functional problem due to wrong connector assembly.

DDR2 SO-DIMM sockets are designed to accept modules that conform to JEDEC MO-224. The sockets come with a small form factor which allows fitting into smaller chassis, aiding the development of smaller & lighter notebooks. It comes in two voltage options with different key-ID to prevent incorrect mating. It operates at a higher speed & bandwidth lowers power consumption.

DDR3 vertical DIMM sockets are designed to accept 240 position DDR3 memory modules that conform to JEDEC M0-269. Low-resistance contacts support the use of RDIMM (registered DIMM), which helps to further reduce power consumption in data center hardware.