Search Results for 3 axis vs 6 axis gyro
Dubox - Product Presentation - Amphenol CS
• Current Rating: 3 A continuous • Contact Resistance: 15mΩ max. • Contact Dielectric Withstanding Voltage: 1000 V rms. Electrical Performance • Mating Cycles (durability): 200 -Gold • Insertion Force gold finish contact: 1.3 N • Withdrawal Force (min) gold finish contact: 0.3 N • Contact Normal Force: 0.6N • Contact Wiping ...
What is the Difference Between Return Loss and VSWR? - Amphenol RF
Voltage Standing Wave Ratio or VSWR and Return Loss measure the amount of signal reflected by a connector. This is extremely important factor that contributes to the total signal efficiency of the connector.
5980470P-3 - Amphenol Antenna Solutions
(3x) Hepta Band, 42-Port, Tri-Sector Antenna, 65°, (1x) 698-803 | (1x) 880-960 | (1x) 698-960 | (4x) 1427-2690 MHz, 3053 mm
TRIAXIAL ICP® ACCELEROMETER Revision: D - PCB
Size (Height x Length x Width) 0.25 in x 0.25 in x 0.25 in 6.35 mm x 6.35 mm x 6.35 mm Weight(without cable) 0.04 oz 1.0 gm [2] Electrical Connector Integral Cable Integral Cable Electrical Connection Position Side Side Cable Termination 1/4-28 4-Pin Jack 1/4-28 4-Pin Jack [3] Cable Length 5 ft 1.5 m Cable Type 034 4-cond Shielded 034 4-cond ...
Model 3713D1FD50G Triaxial DC Accelerometer Installation and ... - PCB
3.0 Principle of Operation The sensor element of the 3710 series features a proof mass, ring frame, and attachment system between the two. These features are bulk micro machined from the same single-crystal silicon wafer. The movement of the proof mass is directly affected by acceleration applied in the axis of sensitivity.
Hybrid Combiners PRO-PHY450-3 - AMPHENOL PROCOM
PRO-PHY450-3-6: 210000621 : 445 - 460 MHz: Add to quote: PRO-PHY450-3-7: 210000575: 455 - 470 MHz: Add to quote: PRO-PHY450-3-8: 210000576 : 465 - 480 MHz: Add to quote: Note * The isolation between the Tx ports is directly dependent on the terminating VSWR on the antenna port. With an antenna load VSWR = 1.5, the isolation between the two Tx ...
Model 603C01 | PCB Piezotronics
Model 603C01:Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin conn., single po
PRO-PHY 380-520-3 dB-... - AMPHENOL PROCOM
Hybrid Coupler with 3 dB coupling covering the 380 - 520 MHz band. Excellent high-power performance. If working as combiner max. input power 50 W per port into max. two ports of the four ports. If working as splitter 100 W into max. one port. Very low insertion loss over the entire frequency range.
5978600P-3 - Amphenol Antenna Solutions
(3x) Hexa Band, 36-Port, Tri-Sector Antenna, 65°, (2x) 698-960 | (2x) 1427-2180 | (2x) 2490-2690 MHz, 2353 mm
Model 480B21 | PCB Piezotronics
Model 480B21:3-channel, battery-powered, ICP® sensor signal cond., gain x1, x10, x100, BNC input/output conn.
CUUX033X03Fxyz0 - Amphenol Antenna Solutions
Panel, 1FT, 6-Port, 33°, XPOL, (1x) 696-960 | (2x) 1695-2700 MHz, Fixed Tilt
PERFORMANCE SPECIFICATION TRIAXIAL ACCELEROMETER 65HT-XX
2.3.1 Amplitude, ±5% (Z axis) Hz 1 to 6000 (X, Y axis) 1 to 5000 . ±1 dB 0.5 to 8000 (refer to typical curve, Figure 1) 2.3.2 Phase, ±5° Hz @ 3 ... DOCUMENT 76678 REVISION NR Page 3 of 6; CONTINUED PRODUCT IMPROVEMENT NECESSITATES THAT ENDEVCO OF PCB NORTH CAROLINA RESERVES THE RIGHT TO MODIFY THESE SPECIFICATIONS ...
CUT070X06Fxyz0 - Amphenol Antenna Solutions
Canister, 2FT, 12-Port, 3-Sector Clover-Shape 70° Pattern, XPOL, (1x) 696-960 | (1x) 1695-2700 MHz, Fixed Tilt
Introduction to 4-20 mA vibration monitoring - wilcoxon.com
Introduction to 4-20 mA vibration monitoring - wilcoxon.com
MotionGrade™ M23 Hybrid Series - アンフェノールジャパン ...
• Vibration and shock tested up to 20g (vibration) and 50g (shock) in 3 axis • Operating Temperature -20°C to +130°C • Housing: Zinc, die-cast, nickel-plated • Cable Clamping Range: 7.5mm – 17mm ... Degree of Protection 3, Per VDE 0110/EN61984, part 6.19.2.2 Over Voltage Category III, Per VDE 0110/EN61984, part 6.19.2.2
Compact Combiners PRO-HDAR450-3 - AMPHENOL PROCOM
An integrated single tray combining solution housing a 3-channel hybrid Tx hybrid combiner, duplex filter, active 3-channel Rx multicouplers and preselector. Minimal 19" rack space required - only 2 HU. Built-in power supply 115/230 VAC. Compatible with digital 6.25 kHz channel spacing. Single Tx isolators fitted as standard.
Piezoresistive triaxial accelerometer - PCB
Z axis Hz 0-3000 0-3000 X, Y axes Hz 0-1500 0-1500 Mounted resonance frequency Hz 17000 26000 Damping ratio % 0.005 0.005 Non-linearity and hysteresis %FSO ±1 ±1 Zero repeatability (after full scale shock) ±0.2 ±0.2 Transverse sensitivity [T option for 2%] % 3 3 Zero measurand output [Z option for 50mV] ±100 ±100 Thermal zero shift
Model 356A32 | PCB Piezotronics
Model 356A32:Platinum Stock Products; Triaxial, mini (5 gm) high sensitivity, ICP® accel., 100 mV/g, 1 Hz to 4k Hz, titanium hsg, 10 ft mating cable s
2C6U4MT360X12Fwxys4-GPS (3) - Amphenol Antenna Solutions
2C6U4MT360X12Fwxys4-GPS (3) - Amphenol Antenna Solutions
PERFORMANCE SPECIFICATION TRIAXIAL ACCELEROMETER 2230EM1
axis arrow produces positive output. 3.2 RESISTANCE GΩ ≥ 10 . At +500°F (+260°C) MΩ ≥ 25 . 3.3 CAPACITANCE pF 770 . 3.4 GROUNDING Signal return connected to case. 4.0 ENVIRONMENTAL CHARACTERISTICS. 4.1 TEMPERATURE RANGE -67°F to +500°F (-55°C to +260°C) 4.2 HUMIDITY Hermetically sealed . 4.3 SINUSOIDAL VIBRATION LIMIT g pk 1000