Search Results for 6 2.8
SERIES 426 PREAMPLIFIERS FOR MEASUREMENT MICROPHONES - PCB
< 5.6 µV [1] < 5.6 µV [1] < 9.3 µV [2] < 5.6 µV [2] Output Voltage (Maximum) ± 8 V pk; ± 8 V pk. ± 50 V [2] ± 8 V pk. Frequency Re-sponse. 5 Hz; to 126 kHz. ± 0.1 dB 2.5 Hz; to 126 kHz. ± 0.2 dB 3.98 Hz; to 126 kHz. ± 0.5 dB 5 Hz; to 126 kHz. ± 0.1 dB TEDS IEEE 1451; Yes [3] Yes [3] Yes [3] Yes [3] Temperature. Rating (Operating)-40 ...
PRECISION ICP ACCELEROMETERS - PCB
2. IMI Sensors offers a wide range of ICP ® accelerometers with an AC voltage output. These accelerometers are ideal for route-based and permanently-mounted predictive maintenance applications.
Data Sheet R-Series RT4 SSI - Temposonics
Vibration test 10 g / 10 to 2000 Hz, IEC standard 60068-2-6 (resonance frequencies excluded) EMC test2 Electromagnetic emission: IEC/EN 50081-1 Electromagnetic susceptibility: IEC/EN 50082-2 IEC/EN 61000-4-2/3/4/6, level 3/4 criterium A Magnet movement velocity1 Any Design/Material
40623 - PCB
recommended torque on .25 [6.3] hex: 25-35 in-lbs [2.8-3.9 n-m] dimensions "a" & "b" to suit user requirements these dimensions for .750 [19.05] thick wall. c'bore for thicker walls mounting hole preparation 1 2 model 065a02 seal.015 [.38] thick "a"
Nuclear Power Plant Sensors | PCB Piezotronics
radiation-hardened Sensors for nuclear power environments. PCB®'s charge output accelerometers utilize piezo sensing elements to directly output an electrostatic charge signal that is proportional to applied acceleration.
B B3 - Amphenol Sine
Ø26.1 Ø23.6 25.0 REF UNEF 11/16"-24-2A. Amphenol Sine Systems 44724 Morle Drive, Clinton Tonship, M 48036 USA amphenolsinecom 092021 Crimp Contacts, Machined Crimp Contacts, Stamped & Formed Part Number AWG Wire Range (mm²) Plating Part Number AWG Wire Range (mm²) Plating
Assembly Instructions-C25 Amphenol BNC
299 Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com Assembly CLAMP CONNECTORS Step 1 Step 2 Step 3 Step 4 Step 5 For angle plugs only:(except 31-204) Solder center
Assembly Instructions-C25 Amphenol BNC
299 Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com Assembly CLAMP CONNECTORS Step 1 Step 2 Step 3 Step 4 Step 5 For angle plugs only:(except 31-204) Solder center
B B2 - Amphenol Sine
of: sh: rev: dwg no: title: rev description date revisions eco by appr b1 released drawing aug-16-2014 ben see part number chart process specifications:
VERY HIGH FREQUENCY ICP® ACCELEROMETER Revision: N
Model ICS-6 NIST traceable single axis amplitude response calibration from 10 Hz to upper +/-3dB point. (1) Entered: LK Engineer: NJF Sales: MC Approved: NJF Spec Number: Date: 3/13/2017 Date: 3/13/2017 Date: 3/13/2017 Date: 3/13/2017 9701 3425 Walden Avenue, Depew, NY 14043 Phone: 800-959-4464
PERFORMANCE SPECIFICATION SENSOR 6, DEGREES OF FREEDOM 7360A -XXX YYY ZZZ
SENSOR 6, DEGREES OF FREEDOM (7360A -XXX YYY ZZZ) Engineer. 1.0 DESCRIPTION. The ENDEVCO® Model 7360A is a six-degree of freedom (6DOF) sensor that features three DC accelerometers and . three angular rate sensors packaged in a compact enclosure. This 6DOF sensor is designed specifically for automotive
Amphenol
AMPHENOL CORPORATION Amphenol Industrial Phone: 888-364-9011 191 Delaware Avenue Sidney, NY 13838-1395 www.amphenol-industrial.com Amphenol® 97 Series Connectors are UL recognized and CSA recognized.
SUPPLIER QUALITY ASSURANCE MANUAL - ssi-sensors.com
2.4 product identification and traceability 6 2.5 measurement and test equipment 7 2.6 inspection and test control procedures 7 2.7 product protection and preservation 7 2.8 hazardous materials/restricted substance 7 2.9 statutory and regulatory requirements 8 2.10 conflict minerals 8
ICP PRESSURE SENSORS - PCB
2. ICP ® PRESSURE SENSOR Detect and monitor pulsations, instability, surges, turbulence and acoustics Hazardous location troubleshooting, predictive
Model 629A31 | PCB Piezotronics
Model 629A31:Triaxial, industrial, ceramic shear ICP® accel., 100 mV/g, 0.8 to 8k Hz, side exit, 4-pin conn., triaxial frequency sweep ISO 17025 accre
Charles Optical Taps - Charles Industries
2-8 cfst-aft260400a cfsm-mft260400a 8.9 2.8 2-7 cfst-aft240600a cfsm-mft240600a 7.0 4.6 2-6 cfst-aft230700a cfsm-mft230700a 6.3 6.0 2-4t cfst-aft2xxxx0a cfsm-mft2xxxx0a 4.2 term. 4 tap ports 4-21 cfst-aft495050a cfsm-mft495050a 21.3 0.6 4-19 cfst-aft490100a cfsm-mft490100a 18.7 0.8
Amphenol
AMPHENOL CORPORATION Amphenol Industrial Phone: 888-364-9011 191 Delaware Avenue Sidney, NY 13838-1395 www.amphenol-industrial.com Amphenol® 97 Series Connectors are UL recognized and CSA recognized.
Temposonics
IEC/EN 61000-4-2/3/4/6, level 3/4 criterium A, CE qualified ‡ Sensor rod and interconnection cable is mounted inside a hydraulic housing or metal housing. Shock rating: 100 g (single hit)/ IEC standard 68-2-27 (survivability) Vibration rating: 10 g/10 to 2000 Hz, IEC standard 68-2-6 (operational) WIRING
VIBRATION SWITCHES - PCB
120 to 60k cpm [6] 2 to 1000 Hz. Power; 85 to 245 VAC, 50-60 Hz or 24 VDC (10%) Relay Types* SPDT Form C Relay or Triac. Relay Rating; 10A 30VDC/240VAC (Relay) or 230 VAC 5A (Triac) Relay Contacts; Normally Open or Normally Closed. Relay Latching; Latching or Non-Latching. Output (RMS Vibration) 4-20 mA. Output (Analog Vibration)
B B ETCHED COVER CABLE 030A10 10-32 COAXIAL PLUG - PCB
JDM 6/12/17 JDM 6/12/17 GCD 6/12/17 1 7 7 6 4 PCB Piezotronics Inc. claims proprietary rights in the information disclosed hereon. Neither it nor any reproduction thereof will be disclosed to others without the written consent of PCB Piezotronics Inc. REVISIONS REV DESCRIPTION DIN D UPDATED TITLE 46894.156 [3.96].11 [2.8].23 [5.7] 4 1 2 3 6 ...